Environment Simulation for Studying the Effects of Air Pollutants on Computers

This paper describes a study directed towards the laboratory simulation of parameters of the office environment related to air borne gaseous and particulate pollutants and initial operating experience of a particulate test chamber, instrumentation, and control techniques. Also discussed is the design of a simple gaseous test chamber being constructed. Gas dilution procedures, control and general operating approach are described.     

The Effects Of Ozone On Tobacco And Pinto Bean as Conditioned by Several Ecological Factors

The sensitivity of tobacco and/or pinto bean to ozone, as an air pollutant, is increased by growing plants in a shortened photoperiod under reduced light intensity and in a light potting mix. Sensitivity also is influenced by carbon dioxide concentration, time of day, and age of plant at time of exposure. Plants are more severely injured by a given dose under continuous exposure than when the exposure is split into two time periods. Tobacco shows cumulative development of injury when exposed to low concentrations intermittently over several days.     

Interactions of Environmental Factors on the Sensitivity of Plants to Air Pollution

Before potential damage to vegetation can be adequately forecast, even after an air pollution alert has been placed in effect, a clear understanding of the interactions of environment on plant sensitivity must be ascertained. This involves detailed study of single factors and then multiple factors using the phytotoxicants in question. Factors studied or suggested include light (quality, intensity, and duration), temperature, carbon dioxide concentration, humidity, wind, soil moisture, soil aeration, nutrient levels, and soil texture. This paper presents a review of the work relating plant injury to specific air pollutants as conditioned by several environmental conditions supported by research on the interactions of ozone with these environmental conditions.     

Recent Electrostatic Precipitator Experience with Ammonia Conditioning of Power Boiler Flue Gases

Motivated by heightened recent interest, Koppers Co. has been experimenting with ammonia conditioning of power boiler flue gases for the purpose of improving the precipitability of the emitted fly ash. Chemical reactions resulting from ammonia injection are postulated. Measurements on three pulverized coal and two cyclone fired boilers, all of which emit acidic ash, are described. In all five cases, considerable but varying, increase in precipitator power input and collection efficiency resulted when gaseous ammonia in the amount of 1 5 ppm was injected between the economizer and air preheater. The conditioned fly ash showed decreased acidity and inconsistent change in electrical resistivity. Unless air heater temperatures were unusually high (>400°F), tendency of the air heater to plug was an additional, but unwanted, result. At one station with high air heater outlet temperature ammonia injection has been adopted as a permanent solution to community pressure for reduction of stack discharge. Ammonia injection downstream of the air heater produced no effect. Future plans are presented to continue the program beyond results described here.     

Objective Evaluation of Emergency Plans for Oxidant Control

Emergency plans for oxidant controls provide the basis for taking preventive action to protect public health. Historic oxidant data (1970 to Sept. 1974) from the South Coast Air Basin (SCAB), were evaluated to assess episode characteristics in an area where emergency strategies are most likely to be enforced. These findings, together with an objective study of a test case episode (June 1974) using a photochemical air quality simulation model, suggest that the currently conceived emergency plans for oxidant control are unlikely to be effective. It is concluded that, because of the chemical and mefeorofogfcal complexities of the episodes, they are extremely difficult both to predict and concurrently to control over their short-lived duration.     

1985 Update,Operating History and Current Status of Fabric Filters in the Utility Industry

Stringent particulate emissions limits and increasing awareness of stack opacity is leading the utility industry to use high efficiency particulate control systems. In response to this trend, the Electric Power Research Institute (EPRI) is conducting several research programs aimed at improving the operation, maintenance and performance of particulate control systems. One of these programs, RP-1401, “Reliability Assessment of Particulate Control Systems,” is developing operation, maintenance and design data bases for both electrostatic precipitators and fabric filters. This paper discusses some of the intermediate findings of the work done on fabric filters.     

Charge-based fractionation of oxyanion-forming metals and metalloids leached from recycled concrete aggregates of different degrees of carbonation: A comparison of laboratory and field leaching tests

The release and charge-based fractionation of As, Cr, Mo, Sb, Se and V were evaluated in leachates generated from recycled concrete aggregates (RCA) in a laboratory and at a field site. The leachates, covering the pH range 8.4-12.6, were generated from non-carbonated, and artificially and naturally carbonated crushed concrete samples. Comparison between the release of the elements from the non-carbonated and carbonated samples indicated higher solubility of the elements from the latter. The laboratory leaching tests also revealed that the solubility of the elements is low at the “natural pH” of the non-carbonated materials and show enhancement when the pH is decreased. The charge-based fractionation of the elements was determined by ion-exchange solid phase extraction (SPE); it was found that all the target elements predominantly existed as anions in both the laboratory and field leachates. The high fraction of the anionic species of the elements in the leachates from the carbonated RCA materials verified the enhanced solubility of the oxyanionic species of the elements as a result of carbonation. The concentrations of the elements in the leachates and SPE effluents were determined by inductively coupled plasma mass spectrometry (ICP-MS).     

Efficiency of Reovirus Concentration from Water with Positively Charged Filters

This study examined the efficacy of reovirus concentration from large volumes of water using two positively charged filters: Zeta Plus 1MDS and NanoCeram. The results indicated that an average of 61 and 81% of input reoviruses were effectively recovered, respectively, from recycled water and tap water using NanoCeram filtration.     

Element immobilization in refuse incinerator ashes by solidification in glass, ceramic or cement

Incineration of municipal refuse results in the production of massive quantities of fly ash and bottom ash. Toxic elements in the original refuse may be concentrated up to 40-fold in the resultant ash. There is concern that burial of such ash in landfills could result in leaching of these elements downward into groundwater. In this study, refuse ashes were incorporated into glass, ceramic and cement composites to immobilize such toxic elements. The EP Toxicity Test (1986) was used to show that extraction of such elements by simulated acid rain is effectively blocked in these new solid materials.     

Transformation and adsorption of Fenamiphos, f. sulfoxide and f. sulfone in molokai soil and simulated movement with irrigation

The ban of commonly used soil fumigants, DBCP and EDB, for control of nematodes in pineapple fields has prompted investigations into a non-fumigant nematicide, fenamiphos (Nemacur^®). The transformation and adsorption in soil of fenamiphos and its transformation products, f. sulfoxide and f. sulfone were studied in the laboratory. Fenamiphos adsorption on soil exceeded that of f. sulfoxide and f. sulfone. F. sulfoxide, however, was the most persistent. A one-dimensional simulation model was used to assess the impact of transformation and adsorption on the mobility and distribution of fenamiphos and f. sulfoxide in soil. Simulated results showed that fenamiphos stayed in the topsoil and transformed rapidly to f. sulfoxide. Because of the persistence and mobility of f. sulfoxide, this metabolite leached rapidly and significant amounts remained in the soil. This suggests that for times exceeding three weeks, f. sulfoxide may be the dominant compound providing nematode control in drip-irrigated pineapple.