Static Leaching of Solidified/Stabilized Hazardous Waste from the Soliditech Process

WILT, ANS 16.1 and TCLP leach tests were performed on solidified/stabilized (s/s) wastes treated by Soliditech, Inc. of Houston, Texas as part of a U.S. EPA SITE demonstration project conducted in December 1988 at the Imperial Oil Company/ Champion Chemical Company Superfund site in Morganville, New Jersey. All three leaching tests performed on the s/s wastes indicated that the primary contaminants of concern (lead and PCBs) were not leachable. The ANS 16.1 static leach test for the s/s wastes provided diffusion coefficients (D_e) for Al, Ca, and Na that were comparable to those obtained from the WILT test. However, plots of the ANS 16.1 data indicated that wetting of the samples confounded the static leaching process. The large column WILT D_e was used to estimate that less than 0.8 μg/cm² lead would leach from a one-cubic yard block of s/s waste in contact with groundwater over a 60-month leaching period. This corresponds to concentrations less than 10 μg/L lead in the water contacting the block of s/s waste.     

Does Riparian Fencing Protect Stream Water Quality in Cattle-Grazed Lands?

Environmental Management - Cattle degrade streams by increasing sediment, nutrient, and fecal bacteria levels. Riparian fencing is one best management practice that may protect water quality within...     

Combined monitoring and modeling indicate the most effective agricultural best management practices

Although water quality problems associated with agricultural nonpoint source (NPS) pollution have prompted the rapid and widespread adoption of a variety of so called "best management practices" (BMPs), there have been few realistic efforts to assess their combined effectiveness in reducing NPS pollution. This study used the Variable Source Loading Function (VSLF) model, a distributed watershed model, to simulate phosphorus (P) loading from an upstate New York dairy farm before and after the implementation of a suite of BMPs. With minimal calibration, the model calculates the dissolved P (DP) losses from impervious surfaces (e.g., barnyards), the plant/soil complex, field-applied manure, and loads associated with baseflow conditions. The simulated DP loads agreed well with measured loads for both the pre-BMP and post-BMP periods. More importantly, results showed that BMPs reduced DP loads by 35%, which is over half of the expected reduction if all manure was removed from the watershed, i.e., approximately 50% reduction. The model results indicate that had no BMPs been installed DP loads would be approximately 37% greater than observed at the watershed outlet. The most effective BMPs were those that disassociated pollutant loading areas from areas prone to generating runoff, i.e., hydrologically sensitive areas. By contrast, attempts to reduce P content in manure were somewhat less effective. This study demonstrates that a combination of distributed, mechanistic modeling and long-term monitoring provides better insights into the effectiveness of water quality protection efforts than either individually.     

Chemical and toxicologic assessment of organic contaminants in surface water using passive samplers

Passive sampling methodologies were used to conduct a chemical and toxicologic assessment of organic contaminants in the surface waters of three geographically distinct agricultural watersheds. A selection of current-use agrochemicals and persistent organic pollutants, including polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and organochlorine pesticides, were targeted using the polar organic chemical integrative sampler (POCIS) and the semipermeable membrane device passive samplers. In addition to the chemical analysis, the Microtox assay for acute toxicity and the yeast estrogen screen (YES) were conducted as potential assessment tools in combination with the passive samplers. During the spring of 2004, the passive samplers were deployed for 29 to 65 d at Leary Weber Ditch, IN; Morgan Creek, MD; and DR2 Drain, WA. Chemical analysis of the sampler extracts identified the agrochemicals predominantly used in those areas, including atrazine, simazine, acetochlor, and metolachlor. Other chemicals identified included deethylatrazine and deisopropylatrazine, trifluralin, fluoranthene, pyrene, cis- and trans-nonachlor, and pentachloroanisole. Screening using Microtox resulted in no acutely toxic samples. POCIS samples screened by the YES assay failed to elicit a positive estrogenic response.     

Photolytic dehalogenation of the marine halogenated natural product Q1

The marine halogenated natural product 2,3,3',4,4',5,5'-heptachloro-1'-methyl-1,2'-bipyrrole (Q1) has been detected in high-trophic level biota throughout the world. In this study we UV-irradiated Q1 in order to produce hexahalogenated 1'-methylbipyrroles (Cl(6)-MBPs). Q1 was transformed with half-lives of <5 min. Already after 5 min, all of the five existing Cl(6)-MBPs (H1-H5) were detected in the irradiated sample. Only one Cl(6)-MBP (2,3,3',4',5,5'-hexachloro-1'-methyl-1,2'-bipyrrole (MBP-77, H2) has been previously described in the literature. H5 was identified as 2,3,3',4,4',5'-hexachloro-1'-methyl-1,2'-bipyrrole (MBP-75) by a specific fragment ion detected by GC/ECNI-MS. Fractionations of the irradiation mixture by reversed-phase HPLC followed by (1)H NMR analysis led to the structure of H4, i.e. 2,3,3',4,4',5-hexachloro-1'-methyl-1,2'-bipyrrole (MBP-74). H1 and H3 showed virtually identical (1)H NMR data. Therefore, it could not determined which of either isomers is 2,3,3',4,5,5'-hexachloro-1'-methyl-1,2'-bipyrrole (MBP-76) and which is 2,3,4,4',5,5'-hexachloro-1'-methyl-1,2'-bipyrrole (MBP-78). In addition, two pentachloro-MBPs (P1 and P3) could be traced back to MBP-62 and MBP-69. Cl(6)-MBPs were analyzed in whale blubber from Australia and skua adipose tissue from Antarctica. The marine mammals contained all Cl(6)-MBPs except for the most abundant in the irradiation experiment. The concentrations of the Cl(6)-MBPs amounted to 0.04-1.76% of the concentration of Q1. The highest concentrations of Cl(6)-MBP isomers in the biota samples were found for MBP-76, MBP-77, and MBP-78. These congeners appeared to be the most lipophilic ones owing to the highest retention time in RP-HPLC. Nevertheless, it remained unclear whether the Cl(6)-MBPs were actual halogenated natural products or environmental metabolites of Q1.     

Occurrence, fate and antibiotic resistance of fluoroquinolone antibacterials in hospital wastewaters in Hanoi, Vietnam

Occurrence and behavior of fluoroquinolone antibacterial agents (FQs) were investigated in hospital wastewaters in Hanoi, Vietnam. Hospital wastewater in Hanoi is usually not treated and this untreated wastewater is directly discharged into one of the wastewater channels of the city and eventually reaches the ambient aquatic environment. The concentrations of the FQs, ciprofloxacin (CIP) and norfloxacin (NOR) in six hospital wastewaters ranged from 1.1 to 44 and from 0.9 to 17 micrgl(-1), respectively. Total FQ loads to the city sewage system varied from 0.3 to 14 g d(-1). Additionally, the mass flows of CIP and NOR were investigated in the aqueous compartment in a small wastewater treatment facility of one hospital. The results showed that the FQ removal from the wastewater stream was between 80 and 85%, probably due to sorption on sewage sludge. Simultaneously, the numbers of Escherichia coli (E. coli) were measured and their resistance against CIP and NOR was evaluated by determining the minimum inhibitory concentration. Biological treatment lead to a 100-fold reduction in the number of E. coli but still more than a thousand E. coli colonies per 100ml of wastewater effluent reached the receiving water. The highest resistance was found in E. coli strains of raw wastewater and the lowest in isolates of treated wastewater effluent. Thus, wastewater treatment is an efficient barrier to decrease the residual FQ levels and the number of resistant bacteria entering ambient waters. Due to the lack of municipal wastewater treatment plants, the onsite treatment of hospital wastewater before discharging into municipal sewers should be considered as a viable option and consequently implemented.     

Identification and quantification of new polybrominated dimethoxybiphenyls (PBDMBs) in marine mammals from Australia

Marine mammals from Queensland, Australia, are bioaccumulating elevated concentrations of a range of polybrominated natural products. In this study, we detected three new polybrominated dimethoxybiphenyls (PBDMBs) in the blubber of selected marine mammal samples which were identified as 2,6'-dimethoxy-3,3',5-tribromobiphenyl (2,6'-diMeO-BB 36), 2,2'-dimethoxy-3,3'-dibromobiphenyl (2,2'-diMeO-BB 36), and 6,6'-dimethoxy-3,3'-dibromobiphenyl (6,6'-diMeO-BB 11). These three PBDMBs are structurally related to the known natural product 2,2'-dimethoxy-3,3',5,5'-tetrabromobiphenyl (2,2'-diMeO-BB 80). In the first part of this study, 2,2'-diMeO-BB 80 was photochemically debrominated under UV irradiation. This resulted in seven of eight possible mono- to triBDMBs as debromination products. In the second part of this study, the structure of all PBDMBs debromination products was investigated. This was supported by synthesis of two diBDMB and one triBDMB via bromination and subsequent methylation of 2,2'-biphenyldiol. Structures of the remaining PBDMBs were tentatively assigned by considering the retention times, mass spectra and amounts formed during UV irradiation of 2,2'-diMeO-BB 80 . In the third part of this study, blubber of marine mammals from Australia was analysed for PBDMBs using gas chromatography in combination with electron ionization mass spectrometry (GC/EI-MS) in the selected ion monitoring mode. In these samples, 2,2'-diMeO-BB 80 was found at concentrations of 200-1800ngg(-1) lipid weight (lw). The latter represents the highest concentration reported for this compound in environmental samples. 6,6'-diMeO BB 11, 2,2'-diMeO BB 36, and 2,6'-diMeO BB 36 were present at approximately 7ngg(-1) lipids, or 0.43-1.5% of diMeO-BB 80. No further PBDMBs were detected in the samples. The di- and triBDMBs identified in marine mammal blubber have not been reported as natural products. They may represent either new natural products or transformation products of 2,2'-diMeO-BB 80.     

Arsenic speciation in plants growing in arsenic-contaminated sites

Concentrations of total arsenic and of arsenic species were determined by ICPMS and HPLC-ICPMS in terrestrial plant samples. The arsenic concentration in plant samples from the contaminated sites ranged from 1.14 to 98.5 mg kg(-1) (dry mass). However, a very high value, exceeding largely this range was found in a moss sample growing in the contaminated area (1750 mg kg(-1)). Plants growing in a non-contaminated area with similar geological characteristics contained 0.06-0.58 mg As kg(-1). Plant samples from different species were selected and extracted with water, water/methanol (9+1, v/v), and water/methanol (1+1, v/v). Water/methanol (9+1, v/v) was selected as extractant for the speciation analysis for all the plant samples. The extraction efficiencies ranged from 3.0% to 41.4%, with good agreement between samples from the same plant species. Arsenite and/or arsenate were found in all the plant samples. Additionally, methylarsonate (MA), dimethylarsinate (DMA), trimethylarsine oxide (TMAO) and tetramethylarsonium ion (TETRA) were also identified in several plants, and in some cases MA and DMA were the main species found. TMAO, which is usually found as a trace constituent in organisms, was also a significant arsenical in one of the studied samples, where it constituted 24% of the extracted arsenic. In the present study, the patterns of arsenic species varied with the plant species and much higher proportion of organoarsenicals was found in plants from the more contaminated sites.     

Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and Herzegovina

The disposal of coal combustion residues (CCR) has led to a significant consumption of land in the West Balkan region. In Tuzla (Bosnia and Herzegovina) we studied previously soil-covered (farmed) and barren CCR landfills including management practises, field ageing of CCR and the transfer of trace elements into crops, wild plants and wastewaters. Soil tillage resulted in mixing of cover soil with CCR. Medicago sativa showed very low Cu:Mo ratios (1.25) which may cause hypocuprosis in ruminants. Total loads of inorganic pollutants in the CCR transport water, but not pH ( approximately 12), were below regulatory limits of most EU countries. Arsenic concentrations in CCR transport water were <2microgl(-1) whereas reductive conditions in an abandoned landfill significantly enhanced concentrations in leachates (44microgl(-1)). The opposite pattern was found for Cr likely due to large initial leaching of CrVI. Public use of landfills, including farming, should be based on a prior risk assessment due to the heterogeneity of CCR.