Characterizing and locating air pollution sources in a complex industrial district using optical remote sensing technology and multivariate statistical modeling

Emissions of volatile organic compounds (VOCs) are most frequent environmental nuisance complaints in urban areas, especially where industrial districts are nearby. Unfortunately, identifying the responsible emission sources of VOCs is essentially a difficult task. In this study, we proposed a dynamic approach to gradually confine the location of potential VOC emission sources in an industrial complex, by combining multi-path open-path Fourier transform infrared spectrometry (OP-FTIR) measurement and the statistical method of principal component analysis (PCA). Close-cell FTIR was further used to verify the VOC emission source by measuring emitted VOCs from selected exhaust stacks at factories in the confined areas. Multiple open-path monitoring lines were deployed during a 3-month monitoring campaign in a complex industrial district. The emission patterns were identified and locations of emissions were confined by the wind data collected simultaneously. N,N-Dimethyl formamide (DMF), 2-butanone, toluene, and ethyl acetate with mean concentrations of 80.0?±?1.8, 34.5?±?0.8, 103.7?±?2.8, and 26.6?±?0.7 ppbv, respectively, were identified as the major VOC mixture at all times of the day around the receptor site. As the toxic air pollutant, the concentrations of DMF in air samples were found exceeding the ambient standard despite the path-average effect of OP-FTIR upon concentration levels. The PCA data identified three major emission sources, including PU coating, chemical packaging, and lithographic printing industries. Applying instrumental measurement and statistical modeling, this study has established a systematic approach for locating emission sources. Statistical modeling (PCA) plays an important role in reducing dimensionality of a large measured dataset and identifying underlying emission sources. Instrumental measurement, however, helps verify the outcomes of the statistical modeling. The field study has demonstrated the feasibility of using multi-path OP-FTIR measurement. The wind data incorporating with the statistical modeling (PCA) may successfully identify the major emission source in a complex industrial district.     

Behavior of sartans (antihypertensive drugs) in wastewater treatment plants,their occurrence and risk for the aquatic environment

Pharmaceuticals and other anthropogenic trace contaminants reach wastewaters and are often not satisfactorily eliminated in sewage treatment plants. These contaminants and/or their degradation products may reach surface waters, thus influencing aquatic life. In this study, the behavior of five different antihypertonic pharmaceuticals from the sartan group (candesartan, eprosartan, irbesartan, olmesartan and valsartan) is investigated in lab-scale sewage plants. The elimination of the substances with related structures varied broadly from 17 % for olmesartan up to 96 % for valsartan. Monitoring data for these drugs in wastewater effluents of six different sewage treatment plants (STPs) in Bavaria, and at eight rivers, showed median concentrations for, e.g. valsartan of 1.1 and 0.13 μg L^?1, respectively. Predicted environmental concentrations (PEC) were calculated and are mostly consistent with the measured environmental concentrations (MEC). The selected sartans and the mixture of the five sartans showed no ecotoxic effects on aquatic organisms in relevant concentrations. Nevertheless, the occurrence of pharmaceuticals in the environment should be reduced to minimize the risk of their distribution in surface waters, ground waters and bank filtrates used for drinking water.     

Exo-pectinase production by Bacillus pumilus using different agricultural wastes and optimizing of medium components using response surface methodology

In this research, the production of exo-pectinase by Bacillus pumilus using different agricultural wastes was studied. Agricultural wastes containing pectin such as wheat bran, sugar beet pulp, sunflower plate, orange peel, banana peel, apple pomace and grape pomace were tested as substrates, and activity of exo-pectinase was determined only in the mediums containing sugar beet pulp and wheat bran. Then, effects of parameters such as concentrations of solid substrate (wheat bran and sugar beet pulp) (A), ammonium sulphate (B) and yeast extract (C) on the production of exo-pectinase were investigated by response surface methodology. First, wheat bran was used as solid substrate, and it was determined that exo-pectinase activity increased when relatively low concentrations of ammonium sulphate (0.12–0.21 %?w/v) and yeast extract (0.12–0.3 %?w/v) and relatively high wheat bran (~5–6 %?w/v) were used. Then, exo-pectinase production was optimized by response surface methodology using sugar beet pulp as a solid substrate. In comparison to P values of the coefficients, values of not greater than 0.05 of A and B ² showed that the effect of these process variables in exo-pectinase production was important and that changes done in these variables will alter the enzyme activity.     

Monitoring of PCDD/Fs and dioxin-like PCBs and seasonal variations in mussels from the Mar Grande and the Mar Piccolo of Taranto (Ionian Sea,Southern Italy)

The levels and specific profiles of polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in Mytilus galloprovincialis from the Mar Grande and the Mar Piccolo of Taranto were determined during the extensive monitoring plan of Local Health Authority to assess PCDD/Fs and DL-PCBs contamination in food and farm products, within 20 km from the industrial areas of Taranto, between March and December 2011. The average Total Toxicity Equivalence (TEQ) values for the sum of PCDD/F and DL-PCBs ranged from 1.61 to 5.63 pg WHO₂₀₀₅-TEQ g^?1 wet weight basis, with the highest in the first inlet of the Mar Piccolo. In particular, DL-PCBs were the dominant chemicals in all samples, followed by PCDFs and PCDDs. Congener patterns in mussels were similar, indicating a homogeneous behavior in studied areas and, probably, the same type of source. The seasonal concentrations trend showed a relevant increase of dioxin and dioxin-like PCBs TEQs during the summer months, exceeding the limits set by the European Community for food and foodstuff. Reducing PCDD/Fs and PCBs is necessary to decrease contamination levels in order to safeguard marine ecosystem and human health in the Taranto area.     

Determination of benzotriazoles in dishwasher tabs from Germany and estimation of the discharge into German waters

A method was developed for the determination of benzotriazoles (BTs) in dishwasher tabs. BTs consist of 1H-benzotriazole and/or tolyltriazole, i.e., a technical mixture of the two isomers 4-methylbenzotriazole and 5-methylbenzotriazole (5-MBT). The method consisted of weighing of an aliquot of the tab, addition of the internal standard 5-MBT, precipitation of the soaps with CaCl₂ and KOH, derivatization of the filtrate with acetic acid anhydride in a two-phase system, and analysis of the organic toluene layer by gas chromatography with mass spectrometry in the selected ion monitoring mode. Eleven of 12 different dishwasher tabs from the German market were tested positive with BTs ranging from 2 to 66 mg/tab. Dishwashing experiments were performed to show that at least 99 % of the BT amount used in the dishwasher did not remain on the dishes but was released into the wastewater treatment system. The annual release of BTs into the water system was estimated to be ~80 tons. Since 70 % or less of the BTs can be degraded in wastewater treatment plants, at least 24 tons are annually released into rivers in Germany.     

Automotive Emissions After Hot and Cold Starts in Summer and Winter

Randomly selected passenger automobiles were driven over a 7.5-mile composite route in Cincinnati, Ohio. Samples of the exhaust gases were collected from each car by means of a proportional sampler and analyzed for gross hydrocarbons, carbon monoxide, carbon dioxide, and oxides of nitrogen. In addition, detailed analysis of the hydrocarbons was made. This included parafins, 1 through 8 carbon, olefins, 2 through 6 carbon, and aromatics, 6 through 10 carbon. This paper compares the differences in these emissions immediately after starting with “cold” engines as opposed to emissions from cars started with engines already warmed up or “hot.” This determination was made under both cold and warm weather conditions. A comparison is also made in air pollutants emitted from cars driven under the summer as opposed to the winter conditions normally encountered in Cincinnati, Ohio.