Reaction kinetics of waste sulfuric acid using H2O2 catalytic oxidation

The process of recovering waste sulfuric acids using H₂O₂ catalytic oxidation is studied in this paper. Activated carbon was used as catalyst. Main operating parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have effects on the removal of impurities from waste sulfuric acids. The reaction kinetics of H₂O₂ catalytic oxidation on impurities are discussed. At a temperature of 90°C, H₂O₂ feeding rate of 50 g (kg waste acid)^?1 per hour, and catalyst dosage of 0.2 wt% (waste acid weight), the removal efficiencies of COD and chrominance were both more than 99%, the recovery ratio of sulfuric acid was more than 95%, and the utilization ratio of H₂O₂ was 88.57%.

Implications: Waste sulfuric acid is a big environmental problem in China. The amount of waste sulfuric acid is huge every year. Many small and medium-sized businesses produced lots of waste acids, but they don’t have an appropriate method to treat and recover them. H₂O₂ catalytic oxidation has been used to treat and recover waste sulfuric acid and activated carbon is the catalyst here. Main parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have been investigated. The reaction kinetics are discussed. This method can be economical and feasible for most small and medium-sized businesses.     

Impact of chemical leaching on permeability and cadmium removal from fine-grained soils

The aim of this study was to investigate the influence of chemical leaching on permeability and Cd removal from fine-grained polluted soils. Column leaching experiments were conducted using two types of soils (i.e., artificially Cd-polluted loam and historically polluted silty loam). Chemical agents of CaCl₂, FeCl₃, citric acid, EDTA, rhamnolipid, and deionized water were used to leach Cd from the soils. Results showed that organic agents reduced permeability of both soils, and FeCl₃ reduced permeability of loam soil, compared with inorganic agents and deionized water. Entrapment and deposition of colloids generated from the organic agents and FeCl₃ treatments reduced the soil permeability. The peak Cd effluence from the artificially polluted loam columns was retarded. For the artificially polluted soils treated with EDTA and the historically polluted soils with FeCl₃, Cd precipitates were observed at the bottom after chemical leaching. When Cd was associated with large colloid particles, the reduction of soil permeability caused Cd accumulation in deeper soil. In addition, the slow process of disintegration of soil clay during chemical leaching might result in the retardation of peak Cd effluence. These results suggest the need for caution when using chemical-leaching agents for Cd removal in fine-grained soils.

     

高压输电系统对通信局(站)危险影响中地电流系数的确定

高压输电系统发生接地短路故障时,会产生一个地电位升,对通信局(站)会危险影响,为了计算这个危险影响的大小,首先能够准确的计算出高压输电系统的地电流系数。本文论述了高压输电系统对通信局(站)危险影响中地电流系数的确定,介绍了地电流系数的定义,并分析了不同危险情况下地电流系数的计算。     

Applicability of hybrid bionic optimization models with kernel-based extreme learning machine algorithm for predicting daily reference evapotranspiration: a case study in arid and semiarid regions,China

Environmental Science and Pollution Research - The accurate prediction of daily reference crop evapotranspiration (ETO) enables effective management decision-making for agricultural water...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.     

基于BDD考虑共因失效的接触网系统可靠性分析

为分析共因失效对高速铁路接触网系统的影响，将二元决策图(Binary Decision Diagram，BDD)与共因失效理论引入到接触网系统可靠性分析中。利用逻辑相邻优先组合法(Logic Neighbor Priority Connect，LNPC)将高速铁路接触网系统的故障树模型转化为BDD模型并求取其可靠度表达式，利用隐式方法对考虑了共因失效的接触网系统可靠度进行计算，利用MATLAB绘制考虑共因失效和不考虑共因失效情况下接触网系统可靠度变化曲线。研究结果表明:提出的分析方法适用于接触网系统的可靠性分析，为接触网系统的可靠性分析提供了一定的理论依据。     

Effects of organic matter on Leymus chinensis germination,growth, and urease activity and available nitrogen in coastal saline soil

ABSTRACT

The present study was carried out to investigate the effect of three organic matters (stalk powder, microbial fertilizer, and manure) on Leymus chinensis germination, growth, and urease activity and available nitrogen (N) in coastal saline soil. The study was conducted in a completely randomized design with eight treatments: J₀V₀Y₀, J₁V₀Y₀, J₀V₁Y₀, J₀V₀Y₁, J₁V₁Y₀, J₁V₀Y₁, J₀V₁Y₁, J₁V₁Y₁. The notations were based on the quantities of each agent added to 1 kg of coastal saline soil: J₀ – no straw powder, J₁ – 0.2 kg straw powder, Y₀ – no manure, Y₁ – 0.3 kg manure, V₀ – no microbial fertilizer, V₁ – 0.2 L microbial fertilizer, each in quantic repeat. L. chinensis was sown as 50 seeds per pot. Results indicated that addition of organic agents exerted a significantly enhanced germination, increase in fresh weight and elevated soil urease activity. Soil available N levels were significantly positively correlated with soil urease activity and fresh weight, but not with germination rate. It is noteworthy that the halophyte L. chinensis showed improved characteristics when grown in coastal saline soil with addition of organic amendments.