垃圾填埋场对地下水污染的模拟研究

在对长春市某垃圾填埋场进行野外调查的基础上 ,于室内进行了垃圾淋滤模拟实验。分析了垃圾渗滤液污染组分的自然衰减规律 ,建立了垃圾填埋场地下水污染的数值模型 ,采用FEFLOW软件对其进行模拟和预报 ,并取得了较好的效果 ,最后提出防止和防治垃圾填埋场污染地下水的若干措施。     

短程硝化的实现、维持与过程控制的研究现状

短程生物脱氮技术目前倍受人们的关注,国内外学者对短程硝化提出了多种实现及维持的控制途径,但仍存在着一些问题。由于活性污泥法中DO,ORP,pH的变化规律从不同角度不同程度地反映了生物脱氮反应的进程,所以用它们作为控制参数就可以对生物脱氮反应进行过程控制。在分析中,通过对国内外短程硝化控制途径的研究现状与发展趋势的分析和总结,针对目前在实现短程硝化及维持短程硝化各种途径中存在的问题,提出了通过在线检测DO,pH,ORP来实现与维持短程硝化的新思路。     

Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors

Copper adsorption kinetic properties in batch and fixed-bed reactors were studied in this paper. The isothermal adsorption experiments showed that the copper adsorption capacity of a granular activated carbon (Filtrasorb 200) increased when ionic strength was higher. The presence of EDTA diminished the adsorption. An intraparticle diffusion model and a fixed-bed model were successfully used to describe the batch kinetic and fixed-bed operation behaviors. The kinetics became faster when the solution pH was not controlled, implying that the surface precipitation caused some metal uptake. The external mass transfer coefficient, the diffusivity and the dispersion coefficient were obtained from the modeling. It was found that both external mass transfer and dispersion coefficients increased when the flow rate was higher. Finally effects of kinetic parameters on simulation of fixed-bed operation were conducted.     

Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China

A detailed investigation was conducted to understand the contamination characteristics of a selected set of potentially toxic metals in Shanghai. The amount of Pb, Zn, Cu, Cr, Cd and Ni were determined from 273 soil/dust samples collected within urban area. The results indicated that concentration of all metals except Ni in soils was significant, and metal pollution was even severer in roadside dust. A series of metal spatial distribution maps were created through geostatistical analysis, and the pollution hotspots tended to associate with city core area, major road junctions, and the regions close to industrial zones. In attempt of identifying the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Pb, Zn and Cu mainly originated from traffic contaminants; soil Ni was associated with natural concentration; Cd largely came from point-sourced industrial pollution; and Cr, Ni in dust were mainly related to atmospheric deposition.     

Effects of open burning of rice straw on concentrations of atmospheric polycyclic aromatic hydrocarbons in central Taiwan

The sizes and concentrations of 21 atmospheric polycyclic aromatic hydrocarbons (PAHs) were measured at Jhu-Shan (a rural site) and Sin-Gang (a town site) in central Taiwan in October and December 2005. Air samples were collected using semi-volatile sampling trains (PS-1 sampler) over 16 days for rice-straw burning and nonburning periods. These samples were then analyzed using a gas chromatograph with a flame-ionization detector (GC/FID). Particle-size distributions in the particulate phase show a bimode, peaking at 0.32-0.56 microm and 3.2-5.6 microm at the two sites during the nonburning period. During the burning period, peaks also appeared at 0.32-0.56 microm and 3.2-5.6 microm at Jhu-Shan, with the accumulation mode (particle size between 0.1 and 3.2 microm) accounting for approximately 74.1% of total particle mass. The peaks at 0.18-0.32 microm and 1.8-3.2 microm at Shin-Gang had an accumulation mode accounting for approximately 70.1% of total particle mass. The mass median diameter (MMD) of 3.99-4.35 microm in the particulate phase suggested that rice-straw burning generated increased numbers of coarse particles. The concentrations of total PAHs (sum of 21 gases + particles) at the Jhu-Shan site (Sin-Gang site) were 522.9 +/- 111.4 ng/ml (572.0 +/- 91.0 ng/ml) and 330.1 +/- 17.0 ng/ml (or 427.5 +/- 108.0 ng/ml) during burning and nonburning periods, respectively, accounting for a roughly 58% (or 34%) increase in the concentrations of total PAHs due to rice-straw burning. On average, low-weight PAHs (about 87.0%) represent the largest proportion of total PAHs, followed by medium-weight PAHs (7.1%), and high-weight PAHs (5.9%). Combustion-related PAHs during burning periods were 1.54-2.57 times higher than those during nonburning periods. The results of principal component analysis (PCA)/absolute principal component scores (APCS) suggest that the primary pollution sources at the two sites are similar and include vehicle exhaust, coal/wood combustion, incense burning, and incineration emissions. Open burning of rice straw was estimated to contribute approximately 5.0-33.5% to the total atmospheric PAHs at the two sites.     

Fate of anilide and aniline herbicides in plant-materials-amended soils

The fate of herbicides trifluralin, pendimethalin, alachlor and metolachlor in paddy field soils amended with plant materials was investigated. The plant materials were purple sesbania, vegetable soybean and rice straw. The investigation was performed at two temperatures (25 and 40 degrees C) and two soil water moistures (60 and 90% water-holding capacity). The results showed linear and Freudlich equations described the adsorption of amide compound to soil. Adsorption coefficient (K(d)) fit to linear equation were in general greater in plant material-amended soils than in non-amended soil, especially in soil amending with rice straw. Increasing temperature and soil water moisture content shortened the half-lives of compounds in various treated soils. The movement of compounds in the soil columns showed the maximum distribution of aniline type compound, trifluralin and pendimethalin, appeared at the upper top of 0 to 5 and 0 to 10 cm of soil column, respectively, and of anilide type, alachlor and metolachlor, were distributed at 0 to 25 cm of the soil column. The mobility of chemicals in the different treated soils was simulated by the behavior assessment model (BAM). There was no significant difference among different plant material incubated soils on dissipation and mobility of compounds in soils.     

黄铁矿焙烧过程中铊析出影响因素及其烧渣中重金属的相态分布研究

通过模拟硫酸厂的沸腾焙烧炉,考察了黄铁矿焙烧过程中铊(T1)析出的影响因素.并通过分级提取法考察了黄铁矿烧渣中重金属的相态分布.结果表明,T1释放率随焙烧温度的升高而增加,随停留时间的增长而增加;当O2流量在20～300 mL/mi.范围变化时,T1释放率先增后减.环境中备受关注的重金属(如Pb、Cd、Cr等)在黄铁矿烧渣中以Pb为主,各相态Pb的总量达到1 429.20 μg/g,且黄铁矿烧渣中的重金属(除Cu和Sr外)主要是以分布于硅酸盐矿物相中的残余态形式存在,因此在环境中不易迁移释放.尽管黄铁矿烧渣中的重金属(除Cu和Sr外)不是以非残余态分布为主,但非残余态重金属的总量也不少,因此黄铁矿烧渣在环境中的潜在污染风险应当引起重视.     

双循环多级水幕脱硫塔的设计和性能测试

双循环多级水幕脱硫塔是在常规两段式湿法脱硫塔基础上加以改进而成的新型脱硫塔,其双循环浆液采用不同pH控制,低pH促进CaCO2溶解,高pH提高SO2吸收效果;同时,多级水幕强化气液流态,增加气液接触面积和传质动力,促进对SO2的吸收.实验利用SPSSV13.0软件进行正交实验设计,通过数据分析得出两个不同的优化运行方案,再利用多指标分析法中的综合平衡法进行单因素实验,得出最优运行方案.在最优运行方案条件下,即烟气流量为100 m3/h,上循环浆液pH为6.0,下循环浆液pH为4.8,上、下循环液气比均为20 L/m3,人口 SO2质量浓度为1 000mg/m3时,脱硫效率达97.8%,CaCO3利用率为95.2%,钙硫质量比约为1.03.双循环多级水幕脱硫塔具有良好的应用前景,实验结果对现场脱硫系统的调试和运行有很好的参考价值.     

钱塘江流域污染负荷及水环境容量研究

采用排污系数法计算了钱塘江流域不同污染源COD和氨氮的污染负荷,研究了整个流域90%、75%和so%水文保证率下的水环境容量.以流域水质目标为出发点,考虑污染负荷和流域社会经济发展需求相协调的原则,确定了钱塘江流域水污染总量控制阶段性目标.