Acute and chronic toxicity of organophosphate monocrotophos to Daphnia magna

The acute and chronic toxicity of monocrotophos (MCP), the binary joint toxicity of MCP and bifenthrin (BF), and sodium dodecyl benzene sulfonate (SDBS) to Daphnia magna (D. magna) was evaluated. The 24 h-median effective concentration (24 h-EC₅₀) and 48 h-median lethal concentration (48 h-LC₅₀) of MCP towards D. magna were 161 and 388 μ g/L, respectively. In addition, the lowest-observed effective concentration (LOEC) and non-observed effective concentration (NOEC) of MCP to D. magna were 10 and 5 μ g/L, respectively. Furthermore, the chronic value (ChV) of MCP against D. magna was 7 μ g/L and the acute chronic ratio (ACR) was 55. The number of offspring per female and the intrinsic rate of natural increase (r) were identified as the parameters that were most sensitive to MCP. In addition, toxic unit (TU) analysis was employed to evaluate the joint toxicities. The calculated TU_mix values of binary equitoxic mixtures of MCP + BF and MCP + SDBS were 1.47 and 1.63, respectively, which suggests that both equitoxic mixtures exert a limited antagonistic effect. The results of this study revealed that the toxic threshold of MCP towards D. magna is higher than its reported highest residue (4 μ g/L) in the ordinary aquatic environment, and that concurrent exposure to BF or SDBS may exert a slight antagonistic effect.     

Hydrolysis and photolysis of oxytetracycline in aqueous solution

Oxytetracycline ((2Z,4S,4aR,5S,5aR,6S,12aS)-2-(amino-hydroxy-methylidene)-4-dimethylamino-5,6,10,11,12a-pentahydroxy-6-methyl-4,4a,5,5a-tetrahydrotetracene-1,3,12-trione) is a member of tetracycline antibiotics family and is widely administered to farm animals for the purpose of therapeutical treatment and health protection. Increasing attention has been paid to the environmental fate of oxytetracycline and other veterinary antibiotics with the occurrence of these antibiotics in the environment. The hydrolysis and photolysis degradation of oxytetracycline was investigated in this study. Oxytetracycline hydrolysis was found to obey the first-order model and similar rate constant values ranging from 0.094 ± 0.001 to 0.106 ± 0.003 day^{? 1} were obtained at different initial concentration ranging from 10 to 230 μ M. Solution pH and temperature were shown to have remarked effects on oxytetracycline hydrolysis. The hydrolysis in pH neutral solution appeared to be much faster than in both acidic and alkaline solutions. Oxytetracycline half-life decreased from 1.2 × 10² to 0.15 day with the increasing temperature from 4 ± 0.8 to 60 ± 1°C. The presence of Ca^{2 +} made oxytetracycline hydrolytic degradation kinetics deviate from the simple first-order model to the availability-adjusted first-order model and greatly slowed down the hydrolysis. Oxytetracycline photolysis was found to be very fast with a degradation rate constant at 3.61 ± 0.06 day^{? 1}, which is comparable to that of hydrolysis at 60°C. The presence of Ca^{2 +} accelerated oxytetracycline photolysis, implying that oxytetracycline become more vulnerable to sunlight irradiation after chelating with Ca^{2 +}. The photolysis may be the dominant degradation pathway of oxytetracycline in shallow transparent water environment.     

Preliminary study on removing Cs+/Sr2+ by activated porous calcium silicate—A by-product from high-alumina fly ash recycling industry

¹³⁷Cs⁺/⁹⁰Sr²⁺-containing radioactive wastewater is one of the most important problems that the world has been facing with. A by-product, activated porous calcium silicate, is generated at high levels by the pre-desiliconizing and soda-lime-sintering processes for producing Al₂O₃ from high-alumina fly ash. In order to examine if this by-product could be used as an absorbent for removal of ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater, various parameters, such as pH, adsorbent dose, contact time, and initial concentration, were discussed. Results indicated that the equilibrium reached in about 2 hr. Activated porous calcium silicate was highly pH sensitive and able to remove Cs⁺/Sr²⁺ in a near-neutral environment. The adsorption equilibrium was best described by Freundlich isotherm equations, and the adsorption of Cs⁺/Sr²⁺ was a physical process. The adsorption kinetic data could be better fitted by the pseudo-second-order model, and the adsorption was controlled by multidiffusion. Current study showed that activated porous calcium silicate has a good adsorption of Cs⁺/Sr²⁺ for their removal. However, other characteristics, such as selectivity because of coexisting cations, elution and regeneration, thermal stability, and acid resistance, should be discussed carefully before using it in an actual field.

Implications:Removing ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater is one of the tough issues that has been attracting more and more attention world widely, which is the same as fly ash. For recycling high-alumina fly ash, in which Al is extracted to produce Al₂O₃, a huge amount of activated porous calcium silicate is generated year by year. In this paper, this by-product was successfully used as an absorbent to remove ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater for the first time. Factors that affect the absorbability and the mechanisms were discussed in details, providing a possible choice for disposal of ¹³⁷Cs⁺/⁹⁰Sr²⁺-containing radioactive wastewater.     

Characteristics of particulate matter emissions from toy cars with electric motors

Aerosol emissions from toy cars with electric motors were characterized. Particle emission rates from the toy cars, as high as 7.47 × 10⁷ particles/s, were measured. This emission rate is lower than other indoor sources such as smoking and cooking. The particles emitted from toy cars are generated from spark discharges inside the electric motors that power the toy cars. Size distribution measurements indicated that most particles were below 100 nm in diameter. Copper was the dominant inorganic species in these particles. By deploying aerosol mass spectrometers, high concentrations of particulate organic matter were also detected and characterized in detail. Several organic compounds were identified using a thermal desorption aerosol gas chromatography. The mass size distribution of particulate organic matter was bimodal. The formation mechanism of particulate organic matter from toy cars was elucidated.

Implications:?A possible new source of indoor air pollution, particles from electric motors in toy cars, was identified. This study characterized aerosol emissions from toy cars in detail. Most of these particles have a diameter less than 100 nm. Copper and some organics are the major components of these particles. Conditions that minimize these emissions were determined.     

Multiple-year black carbon measurements and source apportionment using Delta-C in Rochester,New York

Black carbon (BC), an important component of the atmospheric aerosol, has climatic, environmental, and human health significance. In this study, BC was continuously measured using a two-wavelength aethalometer (370 nm and 880 nm) in Rochester, New York, from January 2007 to December 2010. The monitoring site is adjacent to two major urban highways (I-490 and I-590), where 14% to 21% of the total traffic was heavy-duty diesel vehicles. The annual average BC concentrations were 0.76 μg/m³, 0.67 μg/m³, 0.60 μg/m³, and 0.52 μg/m³ in 2007, 2008, 2009, and 2010, respectively. Positive matrix factorization (PMF) modeling was performed using PM_2.5 elements, sulfate, nitrate, ammonia, elemental carbon (EC), and organic carbon (OC) data from the U.S. Environmental Protection Agency (EPA) speciation network and Delta-C (UVBC_370nm – BC_880nm) data. Delta-C has been previously shown to be a tracer of wood combustion factor. It was used as an input variable in source apportionment models for the first time in this study and was found to play an important role in separating traffic (especially diesel) emissions from wood combustion emissions. The result showed the annual average PM_2.5 concentrations apportioned to diesel emissions in 2007, 2008, 2009, and 2010 were 1.34 μg/m³, 1.25 μg/m³, 1.13 μg/m³, and 0.97 μg/m³, respectively. The BC conditional probability function (CPF) plots show a large contribution from the highway diesel traffic to elevated BC concentrations. The measurements and modeling results suggest an impact of the U.S Environmental Protection Agency (EPA) 2007 Heavy-Duty Highway Rule on the decrease of BC and PM_2.5 concentrations during the study period.

Implications: This study suggests that there was an observable impact of the U.S EPA 2007 Heavy-Duty Highway Rule on the ambient black carbon concentrations in Rochester, New York. Aethalometer Delta-C was used as an input variable in source apportionment models and it allowed the separation of traffic (especially diesel) emissions from wood combustion emissions.     

可旋转径向式微粒捕集器消声特性影响因素灰色关联分析

为降低可旋转径向式微粒捕集器中的排气噪声,采用有限元法建立可旋转径向式微粒捕集器声学特性模型,分析得到了其消声特性和传递损失曲线,并采用灰色关联分析方法研究可旋转径向式微粒捕集器结构参数对消声特性的影响程度。结果表明,可旋转径向式微粒捕集器具有降噪能力,且对高频噪声消声效果明显好于低频噪声,平均消声量为20 dB左右;直径比和扩张管锥角是影响可旋转径向式微粒捕集器消声特性的2个主要因素,适当选用小的直径比和扩张管锥角,有利于提高可旋转径向式微粒捕集器的消声性能。     

油田水反硝化技术抑制硫酸还原菌

利用反硝化技术对江苏油田5个联合站的采出水,进行了添加不同抑制剂的浓度、种类、不同配比和接种DNB菌对SRB、DNB的菌落数量、硫化氢的产生量和氧化还原电位的影响的静态实验。研究结果表明:投加一定浓度的硝酸盐、亚硝酸盐和钼酸盐,对油田采出水SRB的生长都有不同程度的抑制作用,而同等浓度的抑制效果表现为亚硝酸盐>硝酸盐>钼酸盐,同时投加DNB和0.3～0.5 g/L(比例为1∶1)的亚硝酸盐/硝酸盐可较好地抑制油田采出水中的SRB和硫化氢的产生,其中0.5 g/L抑制效果最明显,可抑制硫化氢的产生10 d以上,SRB和硫化氢抑制率分别可达87%和98%。以不同药剂的常压静态腐蚀实验结果表明,抑制剂的腐蚀速率比杀菌剂和缓蚀剂略高,但低于石油天然气行业中标准规定的0.0076 mm/a,也远低于对照样的0.152 mm/a。     

改性沸石对低浓度氨氮废水的动态吸附

采用氯化钠溶液对甘肃白银天然沸石改性,以低浓度氨氮(NH4+-N)废水为处理对象,对比了天然沸石和改性沸石的动态吸附特性并绘制穿透曲线,利用Origin软件对实验数据分析处理,得出穿透曲线的通式。结果表明:在相同条件下,改性沸石的穿透时间和吸附饱和时间都比天然沸石的长约1.5倍;沸石经氯化钠改性后,对NH4+-N的吸附速率和饱和吸附量都明显提高,吸附性能显著改善。Origin软件对水溶液中NH4+-N的吸附穿透曲线的Logistic模型回归式具有较高的精度,该模型可以很好地反映沸石吸附剂的动态吸附过程。     

高气速间歇式生物过滤去除高负荷H2S

采用生物过滤法,以鸡粪堆肥和PE混合物为填料,在高气速条件下间歇式处理高负荷H2S废气。空床停留时间为20、15、10、6.7和5 s时,入口浓度3 000 mg/m3下的平均去除率分别为100%、100%、96.5%、89.2%和90.5%。高气速EBRT为5 s时,高入口负荷2 147 g/(m3.h)时的去除负荷为2 023 g/(m3.h),去除率达94%。采用Michaelis-Ment-en模型进行生物降解宏观动力学研究,其中Ks为550 mg/m3,Vm为6.8×104g/(m3.d)。结果表明,在实验温度17～24℃,湿度30%～50%下,生物过滤法间歇式处理高气速高负荷H2S的去除性能好。     

城市污水条件下ASBR厌氧氨氧化的启动与脱氮性能

采用ASBR在城市污水条件下进行厌氧氨氧化的启动与脱氮性能研究。实验接种好氧硝化污泥,在温度为(35±1)℃、HRT为24 h、pH为7.3～8.5的条件下经过130 d的培养,成功启动了厌氧氨氧化反应。实验结果表明,厌氧氨氧化反应稳定运行时,TN容积负荷平均为0.179 kg/(m3.d),NH4+-N、NO2--N和TN去除率分别达到了95.30%、91.30%和76.28%。启动期和稳定运行期NH4+-N、NO2--N去除量和NO3--N生成量的比值分别达到1∶1.54∶0.25和1∶1.27∶0.27;稳定运行期进出水pH差值由启动时的0.85下降到0.24。启动期反硝化和厌氧氨氧化反应同时存在而在稳定运行期厌氧氨氧化发展成为主导反应。MLSS和MLVSS/MLSS先减少后增加,反映了启动过程中硝化细菌、反硝化细菌的衰亡和厌氧氨氧化菌逐渐富集的过程,这与反应器的宏观运行效果相一致。