Resourcefulization approaches to pollution control of chromate residues in China

Over 2 million tons of chromate residues as hazardous wastes have been accumulated from chromate production processes during the past more than 30 years in China. Some serious pollution problems have been caused due to no appropriate technology and management. Approaches are reviewed to pollution control of chromate residues by utilizing them as secondary resources in this paper. In addition to legislation for pollution control, chromate residues can be used as raw materials to produce a great diversity of useful industrial products. Strategies are also recommanded for the resourcefulization of chromate residues.     

Regression comparisons of Tetrahymena pyriformis and Poecilia reticulata toxicity

The toxicity data of chemicals common to both the Poecilia reticulata mortality assay and the Tetrahymena pyriformis growth impairment assay were evaluated. Two chemicals were not toxic at saturation in the T. pyriformis assay. In addition, due to abiotic transformation, a third chemical was removed from further consideration. Each chemical was a priori assigned a mode of toxic action: neutral non-covalent, polar non-covalent, or electrophilic covalent toxicity. To further investigate comparisons between endpoints, polar and electrophilic chemicals were separated into class-based groups. The polar non-covalent chemicals were separated into phenols and anilines, while the electrophilic chemicals were separated into those reacting via Schiff-base formation (i.e., aldehydes) and those reacting via bimolecular substitution to a nucleophile (i.e., selected nitroaromatics). A comparison of toxic potency as a collective set was statistically described by the relationship; log(LC50(-1)) = 1.05(log(IGC50(-1))) + 0.56, n = 124; r2 = 0.85; s = 0.42; F = 682; Pr > F = 0.0001. The relationship between endpoints was inversely proportional to reactivity associated with the mode of action. While the comparative toxicity for neutral narcotics exhibited an excellent fit (r2 = 0.94), the fits for polar narcotics and electrophiles were poorer, r2 = 0.69 and 0.62, respectively. Investigations into class-based groupings indicated fit of toxic potency data for aldehydes (r2 = 0.85) and phenols (r2 = 0.81) were quite good. However, fits for anilines (r2 = 0.43) and nitroaromatics (r2 = 0.68) revealed that toxicity was not as well related between endpoints for these chemicals.     

Prediction of the vertical profile of ozone based on ground-level ozone observations and cloud cover

A number of statistical techniques have been used to develop models to predict high-elevation ozone (O3) concentrations for each discrete hour of day as a function of elevation based on ground-level O3 observations. The analyses evaluated the effect of exclusion/inclusion of cloud cover as a variable. It was found that a simple model, using the current maximum ground-level O3 concentration and no effect of cloud cover provided a reasonable prediction of the vertical profile of O3, based on data analyzed from O3 sites located in North Carolina and Tennessee. The simple model provided an approach that estimates the concentration of O3 as a function of elevation (up to 1800 m) based on the statistical results with a +/- 13.5 ppb prediction error, an R2 of 0.56, and an index of agreement, d1, of 0.66. The inclusion of cloud cover resulted in a slight improvement in the model over the simple regression model. The developed models, which consist of two matrices of 24 equations (one for each hour of day for clear to partly cloudy conditions and one for cloudy conditions), can be used to estimate the vertical O3 profile based on the inputs of the current day's 1-hr maximum ground-level O3 concentration and the level of cloud cover.     

Environmentally friendly production of thiobencarb (Bolero)

S-Alkyl thiocarbamates are commercially available and widely used for their herbicidal properties. Despite the numerous methods for synthesizing these compounds, most employ toxic reagents that are harmful to the environment. Within we report a novel efficient one-pot process for the formation of thiobencarb employing readily available reagents. This method makes use of a trichloroacetyl chloride adduct and requires no complex starting materials. Furthermore, this process is efficient, proceeds in high yields, and utilizes several recyclable reagents.     

Steam-explosion pretreatment for enhancing anaerobic digestion of municipal wastewater sludge.

This study evaluated the use of steam explosion as a pretreatment for municipal wastewater treatment sludges and biosolids as a technique for enhancing biogas generation during anaerobic digestion. Samples of dewatered anaerobic digester effluent (biosolids) and a mixture of thickened waste activated sludge (TWAS) and biosolids were steam-exploded under differing levels of intensity in this study. The results indicate that steam explosion can solublize components of these sludge streams. Increasing the intensity of the steam-explosion pressure and temperature resulted in increased solublization. The steam-explosion pretreatment also increased the bioavailability of sludge components under anaerobic digestion conditions. Increasing the steam-explosion intensity increased the ultimate yield of methane during anaerobic digestion. Batch anaerobic digestion tests suggested that pretreatment at 300 psi was the most optimal condition for enhanced biogas generation while minimizing energy input. Semicontinuous anaerobic digestion revealed that the results that were observed in the batch tests were sustainable in prolonged operation. Semicontinuous digestion of the TWAS/biosolids mixture that was pretreated at 300 psi generated approximately 50% more biogas than the controls. Semicontinuous digestion of the pretreated biosolids resulted in a 3-fold increase in biogas compared with the controls. Based on capillary suction test results, steam-explosion pretreatment at 300 psi improved the dewaterability of the final digested sludge by 32 and 45% for the TWAS/ biosolids mixture and biosolids, respectively, compared with controls. The energy requirements of the nonoptimized steam-explosion process were substantially higher than the additional energy produced from enhanced digestion of the pretreated sludge. Substantial improvements in energy efficiency will be required to make the process viable from an energy perspective.     

Equilibrium and kinetic studies on the adsorption of aniline compounds from aqueous phase onto bifunctional polymeric adsorbent with sulfonic groups

In the present study, a hydrophilic bifunctional polymeric resin (LS-2) with sulfonic groups was synthesized, and the adsorption performance of three aniline compounds, aniline, 4-methylaniline, and 4-nitroaniline onto LS-2 was compared with that on the commercial Amberlite XAD-4. The uptake of the aniline compounds on LS-2 is a procedure of coexistence of physisorption and chemisorption and obeys the pseudo-second order rate equation, while the uptake of the compounds on XAD-4 is merely a physical adsorption and follows the pseudo-first order rate equation. All the isothermal data fit well with the Freundlich model, and the values of K(F) of the compounds adsorbing on LS-2 are much higher than those on XAD-4 suggesting the higher adsorbing capacities on LS-2 than those on XAD-4, which may be attributed to the microporous structure and the polar groups on the network of LS-2 resin. Dynamic adsorption and desorption studies for aniline on LS-2 show that the breakthrough adsorption capacity and the total adsorption capacity are 0.96 and 1.24 mmol per milliliter resin, respectively. Nearly 100% regeneration efficiency for the adsorbent was achieved by 5% hydrochloric acid.     

Estrogenicity and acute toxicity of selected anilines using a recombinant yeast assay

Suspected estrogen modulators include industrial organic chemicals (i.e., xenoestrogens), and have been shown to consist of alkylphenols, bisphenols, biphenylols, and some hydroxy-substituted polycyclic aromatic hydrocarbons. The most prominent structural feature identified to be important for estrogenic activity is a polar group capable of donating hydrogen bonds (i.e., hydroxyl) on an aromatic system. The present study was undertaken to explore the estrogenic activity and acute toxicity of chemicals containing a weaker hydrogen bond donor group on aromatic systems, i.e., the amino substituent. There is a great deal of chemical similarity between aromatic amines (anilines) and aromatic alcohols (phenols). The chemicals chosen for the current study contained an amino-substituted benzene ring with hydrophobic constituents varying in size and shape. Thus, 37 substituted aromatic amines were assayed for estrogenic activity EC50 and acute toxicity LC50 using the Saccharomyces cerevisiae recombinant yeast assay. While the EC50 of 17-beta-estradiol occurs at the 10(-10) range, the aniline with the greatest activity had an EC50 of 10(-6) M. Thus, anilines, in general, are capable only of very weak estrogenic activity in this assay. A comparison of estrogenic potency between the present group of anilines and a set of previously tested analogous phenols indicated that anilines are consistently less estrogenic than phenols. A comparison of hazard indices (EC50/LC50) of these chemicals revealed that, for the vast majority of anilines, the EC50 and LC50 were in the same order of magnitude. More specifically, estrogenic activity of para-substituted alkylanilines increases with alkyl group size up to 5 carbons in length, after which the acute toxicity of the larger alkyl-substituents precluded the ability of the compound to induce the estrogenic response.     

Analytical solutions to compartmental indoor air quality models with application to environmental tobacco smoke concentrations measured in a house

This paper derives the analytical solutions to multi-compartment indoor air quality models for predicting indoor air pollutant concentrations in the home and evaluates the solutions using experimental measurements in the rooms of a single-story residence. The model uses Laplace transform methods to solve the mass balance equations for two interconnected compartments, obtaining analytical solutions that can be applied without a computer. Environmental tobacco smoke (ETS) sources such as the cigarette typically emit pollutants for relatively short times (7-11 min) and are represented mathematically by a "rectangular" source emission time function, or approximated by a short-duration source called an "impulse" time function. Other time-varying indoor sources also can be represented by Laplace transforms. The two-compartment model is more complicated than the single-compartment model and has more parameters, including the cigarette or combustion source emission rate as a function of time, room volumes, compartmental air change rates, and interzonal air flow factors expressed as dimensionless ratios. This paper provides analytical solutions for the impulse, step (Heaviside), and rectangular source emission time functions. It evaluates the indoor model in an unoccupied two-bedroom home using cigars and cigarettes as sources with continuous measurements of carbon monoxide (CO), respirable suspended particles (RSP), and particulate polycyclic aromatic hydrocarbons (PPAH). Fine particle mass concentrations (RSP or PM3.5) are measured using real-time monitors. In our experiments, simultaneous measurements of concentrations at three heights in a bedroom confirm an important assumption of the model-spatial uniformity of mixing. The parameter values of the two-compartment model were obtained using a "grid search" optimization method, and the predicted solutions agreed well with the measured concentration time series in the rooms of the home. The door and window positions in each room had considerable effect on the pollutant concentrations observed in the home. Because of the small volumes and low air change rates of most homes, indoor pollutant concentrations from smoking activity in a home can be very high and can persist at measurable levels indoors for many hours.     

脉冲供电在锌沸腾炉电除尘器上的应用

介绍了一种电除尘器脉冲供电的基本原理及其在锌沸腾炉电除尘器上的应用试验情况。结果表明，在基本保持同一工况条件下，脉冲供电比直流供电降低出口烟气含尘浓度50.4%～79.6%；脉冲供电能改善电除尘器运行性能，提高电除尘器改善系数达1.32；脉冲供电运行安全可靠。