上海霾气候数据序列重建及其时空特征

利用上海11个气象站点1960～2008年日均相对湿度、能见度以及天气现象资料,重建了上海近50a霾气候数据序列,并从时间和空间两个方面分析了上海霾日数的气候特征和变化规律。结果表明,上海霾气候数据序列重建值与报表记录值之间变化形态存在着较好的一致性,重建值较记录值偏高。1960～2008年,上海霾日数以9.7d/10a的线性趋势显著增加,2002年以后霾日数总体上呈减少趋势。上海多年平均霾日数以冬季最多而夏季最少。近50a,上海霾日数呈现出西南部最多-市区较多-东北和东南部最少的空间分布,霾日数的空间变化趋势则表现为西南部增加较多而东部增加较少。1981～2008年,上海霾日数在西部和南部都增加,东部则减少。     

北京市城镇生活方式的环境与能源调查分析

我国现在正处在城市建设的高峰期,建筑能耗已经占到我国总的商品能耗的20%-30%,其中住宅能耗甚至约占到总建筑能耗的60%。尽管如此,但是北京市在住宅建筑能耗这方面的数据还比较缺乏。为了全面了解北京市住宅建筑的室内环境和能耗现状,于2009年1月至2009年5月分别对北京市7个区中的23个住宅小区和2个农贸市场进行了问卷调查,共发放问卷3000份,其中有效问卷为1692份。问卷内容主要包括:建筑情况、围护结构、空调情况、生活习性等。在本次调查对象中非节能建筑占14%,铁窗使用率占到9%,住宅建筑围护结构节能有待提高;64%的用户多余1台空调,99%的住户空调器的制冷温度低于北京市提倡的29℃空调温度;调查结果表明,北京市住宅建筑单位面积能耗为64kW.h/(m2.年),高于中国城镇水平,为美国的2/3,此外,一些有效的节能行为并没有引起大家足够的重视,应加强对节能行为的宣传。     

神经网络方法在地表高程预测中的应用研究

从地表高程预测的研究现状出发,基于Matlab神经网络工具箱构建了广义回归神经网络(GRNN),建立了能够预测地表高程的神经网络预测模型,并与反距离加权法(IDW)的预测结果进行了比较分析。结果表明,GRNN方法计算简单,在相同的样本数据条件下,GRNN的预测精度较高,表明神经网络方法在地表高程预测中的应用是可行的。     

城市生活垃圾收集与运输路线的优化

城市生活垃圾收运系统是生活垃圾管理的重要组成部分,收运费用占垃圾处理处置费用的40%～50%,为降低收运系统成本,减少环境污染与社会影响,需对垃圾车的收运路线进行合理优化。本文在参考国内外大量文献的基础上,评述了国内外城市生活垃圾收集与运输路线的优化模型与方法及其研究进展,通过各种模型与方法的对比,指出它们的优点与存在的问题。借鉴已有的研究思路与方法,引出作者对优化城市生活垃圾收运路线的思路并给出深入研究的建议。     

工业园区低碳发展模式评估与规划分析

通过对工业园区低碳发展模式的评估,分析其低碳发展的能源特征、经济特征与人力特征,并确定工业园区二氧化碳减排的潜力能源。基于能源-碳减排(EC)、经济-能源-碳减排(EEC)和人力-经济-能源-碳减排(HEEC)三种不同情景,在未来发展的一定规划期内,对工业园区具有二氧化碳减排潜力的能源进行规划分析,确定其年递减率,从而实现工业园区不同情景下的二氧化碳减排。通过实际案例研究,证明了评估与规划分析模型的可行性。     

油田作业废水处理技术研究进展

文章讨论了作业废水的组成与特点,并对近年来钻井废水处理工艺,酸化废水处理工艺,压裂废水处理工艺进行了总结与评述。根据作业废水的处理现状,对未来作业废水的处理技术进行了展望。油田废水处理主要向以下三个方面发展:开发新型处理药剂;建立高效处理工艺流程;从污水源头开始控制。     

Characterization of plutonium in deep-sea sediments of the Sulu and South China Seas

Anthropogenic Pu isotopes are important geochemical tracers for sediment studies. Their distributions and sources in the water columns as well as the sediments of the North Pacific have been intensively studied; however, information about Pu in the Southeast Asian seas is limited. To study the isotopic composition of Pu, and thus to identify its sources, we collected sediment core samples in the South China Sea and the Sulu Sea during the KH-96-5 Cruise of the R/V Hakuho Maru. We analysed the activities of ^239+240Pu and the atom ratios of ²⁴⁰Pu/²³⁹Pu using isotope dilution sector-field inductively coupled plasma mass spectrometry (SF-ICP-MS). The ²⁴⁰Pu/²³⁹Pu atom ratios in the sediments of both areas (inventory weighted mean: 0.251 for the South China Sea and 0.280 for the Sulu Sea) were higher than the global fallout value (0.178 ± 0.019), suggesting the existence of Pu from the Pacific Proving Grounds in the North Pacific. Low inventories of ^239+240Pu in sediments were observed in the South China Sea (3.75 Bq/m²) and the Sulu Sea (1.38 Bq/m²). Most of the Pu input is still present in the water column. Scavenging and benthic mixing processes were considered to be the main processes controlling the distribution of Pu in the deep-sea sediments of both study areas.     

Tree bark as a passive air sampler to indicate atmospheric polybrominated diphenyl ethers (PBDEs) in southeastern China

The different barks were sampled to discuss the influence of the tree species, trunk circumference, and bark thickness on the accumulation processes of polybrominated diphenyl ethers (PBDEs) from air into the bark. The results of different PBDE concentrations indicated that barks with a thickness of 0–3 mm collected from weeping willow, Camphor tree, and Masson pine, the trunk circumferences of which were 100 to 150 cm, were better PBDEs passive samplers. Furthermore, tree bark and the corresponding air samples were collected at Anji (AJ), Hangzhou (HZ), Shanghai (SH), and Wenling (WL) to investigate the relationship between the PBDE concentrations in bark and those in air. In addition, the significant correlation (r ²?=?0.906; P?<?0.05) indicated that atmospheric PBDEs were the principle source for the accumulation of PBDEs in the barks. In this study, the log K _BA (bark–air partition coefficient) of individual PBDE congeners at the four sites were in the range from 5.69 to 6.79. Finally, the total PBDE concentration in WL was 5 to 20 times higher than in the other three cities. The result indicated that crude household workshops contributed a heavy amount of PBDEs pollution to the environment, which had been verified by the spatial distribution of PBDEs levels in barks collected at Wenling (range, 26.53–1317.68 ng/g dw). The good correlation between the PBDE concentrations in the barks and the air samples and the variations of the PBDE concentrations in tree barks collected from different sites reflected that the bark could be used as a passive sampler to indicate the atmospheric PBDEs.     

Hazardous substances in indoor dust emitted from waste TV recycling facility

Various hazardous substances contained in waste TV sets might be released into environment via dust during recycling activities. Two brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and tetrabromobisphenol A (TBBPA), and five kinds of heavy metals (Cu, Pb, Cd, Cr, and Ni) were detected in indoor dust collected from two workshops (TV dismantling workshop and subsequent recycling workshop). PBDEs concentrations in dust from waste wires recycling line (722,000 ng/g) were the highest among the studied sites, followed by those in manual dismantling–sorting line (117,000 ng/g), whereas TBBPA concentrations were the highest in manual dismantling–sorting line (557 ng/g) and printed circuit board (PCB) recycling line (428 ng/g). For heavy metals, Cu and Pb were the most enriched metals in all dust samples. The highest concentration of Pb (22,900 mg/kg) was found in TV dismantling workshop-floor dust. Meanwhile, Cu was the predominant metal in dust from the PCB recycling line, especially in dust collected from electrostatic separation area (42,700 mg/kg). Occupational exposure assessment results showed that workers were the most exposed to BDE-209 among the four PBDE congeners (BDE-47, BDE-99, BDE-153, and BDE-209) in both workshops. The hazard quotient (HQ) indicated that noncancerous effects were unlikely for both BFRs and heavy metals (HQ?<?1), and carcinogenic risks for Cd, Cr, and Ni (risk?<?10^?6) on workers in two workshops were relatively low.     

镍基催化剂对污泥微波热解制生物气效能的影响

为实现污水污泥减量化、无害化及资源化的目标,在微波热解污水污泥基础上,进行了镍基催化剂对制取生物气效能影响的研究。采用元素分析对污泥元素进行检测,气/质联用分析(GC-MS)和气相色谱(GC)对热解生物气的组成和含量进行测定。实验结果表明,镍基催化剂的添加对微波热解污水污泥制取生物气有较大促进作用。5%添加量与800℃热解终温条件下具有最佳催化效果:生物气中H2、CO产量最大,H2产量由29 g/kg增加到35.8 g/kg,提升23.4%,CO产量由302.7 g/kg增加到383.3 g/kg,提升26.6%;同时催化剂还能提高热能利用效率,降低热解终温,即5%添加量在700℃热解终温时可达到空白800℃时的产气效果;镍基催化剂主要在500~600℃时发挥催化作用,加快了H2和CO的释放。微波热解污泥制取的生物气具有产量大、富含H2与CO等优点,可推动污水污泥的资源化进程。