Study on the denitrification performance of FexLayOz/activated coke for NH3-SCR and the effect of CO escaped from activated coke at mid-high temperature on catalytic activity

Currently, activated coke is widely used in the removal of multiple pollutants from industrial flue gas. In this paper, a series of novel Fe_xLa_yO_z/AC catalysts was prepared by the incipient wetness impregnation for NH₃-SCR denitrification reaction. The introduction of Fe-La bimetal oxides significantly improved the denitrification performance of activated coke at mid-high temperature, and 4% Fe_0.3La_0.7O_1.5/AC exhibited a superior NO_x conversion efficiency of 90.1% at 400 °C. The catalysts were further characterized by BET, SEM, XRD, Raman, EPR, XPS, FTIR, NH₃-TPD, H₂-TPR, et al., whose results showed that the perovskite-type oxide of LaFeO₃ and oxygen vacancies were produced on the catalysts’ surfaces during roasting. Fe-La doping enhanced the amount of acid sites (mainly Lewis and other stronger acid sites) and the content of multifarious oxygen species, which were beneficial for NO_x removal at mid-high temperature. Moreover, it was investigated that the effect of released CO from activated coke at mid-high temperature on the NO_x removal through the lifetime test, in which it was found that a large amount of CO produced by pyrolysis of activated coke could promote the NO_x removal, and long-term escaping of CO on the activated coke carrier did not have a significant negative impact on catalytic performance. The results of the TG-IR test showed that volatile matter is released from the activated coke while TG results showed that the weight loss rate of 4% Fe_0.3La_0.7O_1.5/AC only was 0.0015~0.007%/min at 300–400 °C. Hence, 4% Fe_0.3La_0.7O_1.5/AC had excellent thermal stability and denitrification performance to be continuously used at mid-high temperature. Finally, the mechanisms were proposed on the basis of experiments and characterization results.

     

Distribution,source, and environmental risk assessment of phthalate esters (PAEs) in water,suspended particulate matter,and sediment of a typical Yangtze River Delta City,China

Phthalates (PAEs) in drinking water sources such as the Yangtze River in developing countries had aroused widespread concern. Here, the water, suspended particulate matter (SPM), and sediment samples were collected from 15 sites in wet and dry seasons in Zhenjiang, for the determination of six PAEs (DMP, DEP, DIBP, DBP, DEHP, and DOP) using the solid-phase extraction (SPE) or ultrasonic extraction coupled with gas chromatography-mass spectrometry (GC-MS). The total concentrations of six PAEs (Σ₆PAEs) spanned a range of 2.65–39.31 μg L^?1 in water, 1.97–34.10 μg g^?1 in SPM, and 0.93–34.70 μg g^?1 in sediment. The partition coefficients (K_d1) of PAEs in water and SPM phase ranged from 0.004 to 3.36 L g^?1 in the wet season and from 0.12 to 2.84 L g^?1 in the dry season. K_d2 of PAEs in water and sediment phase was 0.001–9.75 L g^?1 in the wet season and 0.006–8.05 L g^?1 in the dry season. The dominant PAEs were DIBP, DBP, and DEHP in water and SPM, DIBP, DEHP, and DOP in sediment. The concentration of DBP in water exceeded the China Surface Water Standard. The discharge of domestic sewage and industrial wastewater might be the main potential sources of PAEs. The risk quotient (RQ) method used for the risk assessment revealed that DBP (0.01 < RQ < 1) posed a medium risk, while DIBP and DEHP (RQ > 1) posed a high environmental risk in water, DIBP (RQ > 1) also showed a high risk in sediment.

     

Bidens pilosa L. hyperaccumulating Cd with different species in soil and the role of EDTA on the hyperaccumulation

Environmental Science and Pollution Research - Investigating whether the same hyperaccumulator shows a high accumulation potential for different species of the same heavy metal in the soil has...     

单宁为模板制备纳米二氧化钛 及其对钍的吸附性能

以杨梅单宁(BT)为模板,水热法合成纳米二氧化钛(BT-NTO)。采用XRD、FTIR、SEM和TEM技术对BT-NTO的结构及形貌进行了表征。将BT-NTO用于吸附溶液中的Th~(4+),在溶液pH为3.5、温度为25℃、Th~(4+)初始浓度为0.5 mmol/L的条件下,BT-NTO对Th~(4+)的吸附量为0.905 8 mmol/g;吸附过程符合准二级动力学方程和Langmuir等温吸附方程;溶液中共存的Zn~(2+)、Ni~(2+)、Co~(2+)、Sr~(2+)、Yb~(3+)、Nd~(3+)、Sm~(3+)、Gd~(3+)、La~(3+)、Cl-、ClO4-离子对Th~(4+)吸附量影响较小;BT-NTO的重复使用性能较好。     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。     

采用两段SBR工艺处理石化废水

采用两段序批式活性污泥反应器（SBR）工艺处理高浓度石化废水,考察了DO、MLSS、反应温度对废水处理效果的影响。实验结果表明,两段SBR系统中有机物降解存在着不同的作用机理,第一段主要以去除易降解有机物为主,第二段主要以去除难降解有机物为主。在进水COD为4000mg／L、SBR1中DO为4～5mg／L、MLSS为5000mg／L,SBR2中DO为2～4mg／L、MLSS为3000mg／L、反应温度约为20℃的条件下,废水COD去除率达90％以上。     

以膨润土为辅助添加剂固化/稳定化污泥的试验研究

针对传统以水泥固化污泥,带来的水泥用量大与固化体的浸出液pH过高等问题,提出了以膨润土为添加剂辅助水泥固化/稳定化污泥的思路.通过开展无侧限抗压强度试验、毒性浸出试验,测量掺入膨润土后污泥固化体的强度、重金属浸出率、浸出液COD及pH值,研究该固化/稳定化方法的效果.结果表明,膨润土的掺入极大地提高了固化体的抗压强度,将掺入量为0.4(相对污泥的质量比)的水泥一半用膨润土替代时,固化体的强度提高了6左右.体积安定性也能够满足要求.随膨润土掺入量增加,固化体中锌、铅的浸出率与浸出液的pH值呈现不断减小的趋势,锌与铅的浸出率分别由6.9%下降至0.25%,9.6%下降至5%,pH值由12.3下降至12.1.在强碱条件下及烘干或风干条件下,铜会随着有机物的分解而析出,从而增加铜的浸出率,而膨润土的加入能弥补水泥造成的强碱环境及风干或烘干过程对固化污泥中铜的稳定产生的不利影响.     

温度对底泥中硝基苯的自然衰减及强化降解的影响

利用人工配制的2种不同浓度(1000和100μg·kg-1)的硝基苯污染底泥,研究了4℃和20℃ 2种温度条件下硝基苯的自然衰减和生物强化降解情况.结果表明,2种浓度的硝基苯在4℃时有氧、缺氧条件下均无降解,20℃时有氧和缺氧条件下均有明显的降解;添加筛选出的混合降解菌可快速降解处于泥浆状的硝基苯.因而,对于受到硝基苯污染的底泥修复可充分考虑其自然衰减能力,降低修复成本.     

基于WARMF模型的杭埠-丰乐河流域水文模拟研究

研究了WARMF模型在杭埠-丰乐河流域(巢湖流域最大支流)的水文模拟适应性能并进行了流域水文系统分析.利用AVSWAT2000模型将流域划分为37个子流域,利用流域地貌-土壤分布对应关系、土壤剖面结构、地下水位埋深等条件,确定了子流域的平面分组与剖面土层结构,较大程度上降低了流域模型参数校准的难度与不确定性.利用2000～2003年的水文观测数据,在参数灵敏度分析基础上,对模型水文参数进行了校准与检验.结果表明,WARMF在研究区具有较好的适应性能.WARMF模型与AVSWAT2000模型的水文模拟结果对比表明,WARMF模型具有更好的日拟合性能.基于模型的模拟结果,在空间尺度上定量分析了流域从降水开始到入湖的水循环过程,在时间尺度上分析了年内降雨、径流的分布及其对应关系.流域概化、模型的校准与检验以及流域水文时空变化的系统分析方法等对流域水文、环境的模拟研究与系统分析具有探索意义.     

含溴水源水臭氧处理时溴酸盐的产生与控制

针对南方某含溴水库水(溴离子浓度15～38μg·L-1),利用连续运行实验装置研究了臭氧氧化时溴酸盐的产生条件,同时初步考察了后续生物活性炭(BAC)对溴酸盐的去除效果.研究结果表明,单独采用预臭氧方式时,在臭氧消耗量控制为2.0mg·L-1以内的条件下,溴酸离子浓度低于6 μg·L-1;而采用预臭氧与后臭氧联合处理时,在总臭氧消耗量为2.0mg·L-1的条件下,出现了溴酸离子超标(10μg·L-1)情况.长期运行结果表明,尽管新炭对溴酸离子没有去除效果,但系统连续运行3个月后,BAC上的微生物对溴酸盐具有一定的去除能力.