Environmental assessment of organic soybean (Glycine max.) imported from China to Denmark: a case study

Growing global trade with organic products has increased the demand for environmental impact assessments during both production and transport. Environmental hotspots of organic soybeans produced in China and imported to Denmark were identified in a case study using a life cycle assessment approach. Furthermore, environmental impacts of organic and conventional soybeans at farm gate were compared in the case study. The total global warming potential (GWP) per ton organic soybeans imported to Denmark revealed that 51% came from transportation and 35% from the farm level. Comparing organic and conventional soybean at farm gate showed that GWP, non-renewable energy use, acidification and eutrophication was lower per ton organic soybeans, whereas land use was slightly higher.     

环境与发展

本文论述了环境与发展的关系,并简要介绍了可持续发展的基本理论,在此基础上阐述了在中国如何实施可持续发展战略。     

涡轴发动机燃气涡轮叶片热腐蚀机理分析与改进

目的 提高航空发动机燃气涡轮工作叶片的结构完整性、安全性和可靠性。方法 以某型涡轴发动机燃气涡轮转子叶片热腐蚀案例为研究对象,详细阐述热腐蚀下燃气涡轮转子叶片的结构破坏形式,分析发生热腐蚀部位的分布规律。通过冶金分析方法,研究燃气涡轮转子叶片的热腐蚀-疲劳失效形式。结果 燃气涡轮叶片高摩擦系数的区域在高温燃气的冲刷效应以及热盐腐蚀的作用下,发生表面涂层腐蚀剥落。涂层腐蚀剥落部分的叶片合金基体受到高温燃气的氧化与侵蚀后,形成了热腐蚀坑。腐蚀坑表面的凹凸处出现应力集中,并萌生裂纹,最终引起叶片疲劳断裂。结论 探究了典型腐蚀性物质对燃气涡轮转子叶片的耐高温涂层与镍基合金基体侵蚀与氧化的化学本质,最后针对燃气涡轮转子叶片热腐蚀问题提出了改进建议,可对防范航空涡轴发动机热腐蚀问题提供有益参考。     

沈阳市环保产业现状及发展对策探讨

主要通过对沈阳市环保产业的现状和存在的问题进行了阐述,对沈阳市环保产业如何走向快速、稳定、健康的发展轨道,提出了沈阳市环保产业发展对策。     

染料结晶紫降解菌分离及其特性研究

从印染废水中筛选分离得到结晶紫(CV)降解菌株H,并对其脱色条件和机理进行了研究.结果表明,在外加生长基质条件下,菌株H不仅对CV降解脱色而且能降解中间产物.在pH 7.0、35℃、摇床转速180 r/min条件下,菌株H有最佳的脱色效果.对于20 mg/L CV溶液,生长细胞降解0.5 h,脱色率可达95%.休眠细胞对CV的降解规律也进行了对比探讨.菌株H对CV脱色过程遵循一级动力学方程,脱色速率常数k随CV浓度升高而降低,生长细胞的k值约为休眠细胞的6～7倍.     

连续流间歇曝气氧化沟处理生活污水脱氮除磷研究

为了提高低C/N(3.0～3.5)生活污水的脱氮除磷效率,对设置选择池和厌氧池的氧化沟工艺采用了微孔曝气加搅拌的实验方式和连续流间歇曝气的运行方式,通过对总循环周期(tc)、曝气率(fa)以及出水稳定性的分析讨论,得出TN负荷在0.02 kg N/kg MLSS·d下,控制氧化沟曝气时间与总停留时间比在40%左右时,能实现80%以上的除氮率和35%以上的除磷率.与连续曝气氧化沟相比,不仅出水水质更好,而且节省能量.     

Use of flue gas desulphurisation (FGD) waste and rejected fly ash in waste stabilization/solidification systems

Stabilization/solidification (S/S) processes have been used as the final treatment step for hazardous wastes prior to land disposal. Fly ash is a by-product of coal-fired power generation; a significant proportion of this material is low-grade, reject material (rFA) that is unsuitable as a cement replacement due to its high carbon content and large particle size (>45 microm). Flue gas desulphurization (FGD) sludge is a by-product from the air pollution control systems used in coal-fired power plants. The objective of this work was to investigate the performance of S/S waste binder systems containing these two waste materials (rFA and FGD). Strength tests show that cement-based waste forms with rFA and FGD replacement were suitable for disposal in landfills. The addition of an appropriate quantity of Ca(OH)2 and FGD reduces the deleterious effect of heavy metals on strength development. Results of TCLP testing and the progressive TCLP test show that cement-rFA-Ca(OH)2 systems with a range of FGD additions can form an effective S/S binder. The Leachability Index indicates that cement-based waste forms with rFA replacement were effective in reducing the mobility of heavy metals.     

二维多箱模型预测大气环境方法的研究

采用二维多箱模型对石家庄市区大气污染物ＳＯ２进行了计算,分别计算了４个风向的各子箱污染物浓度,然后按其风向频率加权取和得到平均浓度。把计算结果与地面监测值和１９９４－０１中国环境科学研究院的高空航测值进行了比较分析后发现。多箱模型预测大气环境比单箱模型和其它预测方法产生的误差要小。     

生活污泥干化与生活垃圾协同焚烧研究分析

我国城市化的快速发展导致城市人口的迅速膨胀,城市生活污水产生量也迅速增加,在污水处理过程中自然而然的产生了大量的污泥。据不完全统计,每年一座中等城市产生的污泥量大约在25~30万t。本文通过对生活污泥干化的研究与生活垃圾协同焚烧的研究,有助于形成积极的公众舆论和认同,为垃圾协同污泥焚烧技术在全国的推广实施提供便利。     

应用模式生物检测饮用水源颗粒物的毒性效应

悬浮颗粒物在自然水体中广泛存在,大量小颗粒物(粒径<1μm)可吸附、聚集水中多种污染物,从而形成新的复合污染,影响水生生态系统。已有研究表明,颗粒物粒径越小,传统饮用水处理工艺越难以去除,因此,其表面吸附的污染物也会随之残留在水体中,对饮用水安全产生影响。本研究对南京某自来水厂进水和出水中的颗粒物进行了测定和对比,并选用3种不同种类的模式生物包括发光菌(Photobacterium phosphoreum)、纤细裸藻(Euglena gracilis)和蚕豆(Vicia faba L.),对饮用水源水中不同粒径颗粒物的毒性效应进行了测试。结果表明,传统水处理工艺对小颗粒物(粒径<1μm)的去除效果并不理想;经传统水处理工艺处理后,出水仍显著抑制发光菌发光强度以及纤细裸藻生长,对蚕豆的污染指数较高,可能存在一定健康隐患;进水中颗粒物粒径<1μm组对发光菌发光强度和纤细裸藻生长的抑制效应显著大于粒径≥1μm颗粒物组,蚕豆根尖的污染指数也更高,毒性更强。本研究结果可为饮用水的生物毒性检测和水处理工艺改良提供参考。