张家港市区光环境现状调查与分析

为了解张家港市区的光环境现状,对市区的光环境进行了调查测量,包括夜间的光环境照度、广告标识数量的统计、昼间外墙立面的情况和反射率,还对居民的光环境意识进行了问卷调查。对调查结果进行总结分析,市区存在一些光环境问题:部分支路照度偏高、树木遮挡光线现象严重、部分道路灯具选择不合理、霓虹灯较多、居住区照度偏低等,并提出解决问题的建议:尽快编制照明和广告管控规划、路灯管理部门应加大与其他部门之间的沟通合作、引进专业人才、推广绿色照明等。     

潜流人工湿地填料筛选及其对小城镇微污染水的修复性能评价

为了选择适合小城镇潜流人工湿地的填料,选取小城镇较为常见的材料(废砖、卵石、碎石),结合物化性质,研究25℃下填料对磷的吸附效果,并分析了填料种类对野外潜流人工湿地运行的影响。结果表明:(1)25℃时,3种填料对磷的吸附量随着溶液中初始磷浓度的增加而增加,吸附能力依次为废砖>碎石>卵石;(2)野外潜流人工湿地运行过程中,随HRT的延长,组合填料湿地WL1和废砖填料WL2湿地对总磷的净化效果有所提高,且WL2湿地对总磷的去除效果略优于WL1。因此,可以选择废砖作为小城镇潜流人工湿地系统的填料。     

Detection of Viruses in Coastal Seawater Using <Emphasis Type="Italic">Mytilus Galloprovincialis</Emphasis> as an Accumulation Matrix

The purpose of this study was to demonstrate that shellfish can be used to detect enteric viruses in marine waters where they are present at very low concentrations. Aqua-cultured mussels were placed in the sea just off the mouth of a drainage channel affected by human and animal faecal contamination. Samples were taken from the channel, the sea and the mussels at intervals over two 4-week periods. The samples were tested to verify the presence of both rotaviruses and E. coli. Rotaviruses were detected by Real Time-PCR, typed by multiplex PCR and subsequently sequenced. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. The presence of E. coli in the examined matrices demonstrates contamination of faecal origin throughout the studied environments. Rotaviruses were recorded in channel waters, but not in sea water. In both experiments, rotaviruses were detected in mussels 21 and 28 days after being placed in the sea water off the channel mouth. The use of mussels thus enabled the detection of rotaviruses in waters where the high dilution rendered direct investigation impossible. This study indicates that mussels can be used in marine virological surveillance programs.     

中国火山地区预警政策研究

本文主要介绍了我国的活火山、火山灾害情况及国内外的火山预警政策。在此基础上讨论了我国火山地区预警政策的组成结构,认为完整的火山地区预警政策应该包括活火山识别、火山风险评价与灾害区划图、制定火山应急预案、火山防灾减灾知识宣传、火山监测和灾害预报、火山灾害预警等级划分、火山减灾工程措施以及预警响应措施等方面,并对火山预警政...     

基于析因设计的多种重金属对发光菌联合毒性研究

文章采用析因设计的方法,研究沉积物水浸提液掺杂的多种重金属Cu、Cd、Zn、Pb和Ni对发光菌的联合毒性。通过对试验结果进行方差分析和多元线性回归,建立了重金属浓度和发光菌发光抑制率的关系模型:T=97.983Cu+41.111Cd-27.297Zn+129.869Pb+16.715Ni-5 803.639Cu*Cd+2 270.182Cd*Zn-6 411.870Cd*Pb-675.052Cd*Ni-3 108.544Pb*Ni+15 9552.434Cd*Pb*Ni+274 718.434Zn*Pb*Ni。模型分析结果表明:Zn对联合毒性产生负的影响,Cu、Cd、Pb、Ni对联合毒性具有正的贡献;Cd*Zn二元交互作用和Cd*Pb*Ni、Zn*Pb*Ni三元交互作用表现为协同作用,Cu*Cd、Cd*Pb、Cd*Ni、Pb*Ni二元交互作用表现为拮抗作用,而重金属四元和五元交互作用对联合毒性的贡献不显著。上述重金属联合毒性的作用可为沉积物中重金属复合污染控制提供参考。     

漓江沉积柱重金属垂向分布特征及污染评价

对桂林漓江3个采样点沉积柱状沉积物中主要重金属元素(Cd、Cr、Cu、Zn、Pb、As和Ni)的垂向分布进行了测定。结果表明:7种重金属元素具有相似的垂向变化特征;横向上表现为靠近市区的含量高远离,市区的含量低。地积累指数评价结果显示,远离市区的沉积柱7种金属污染程度较轻,仅有Cd和Ni属于无～中污染程度。临近市区的沉积柱形成污染的元素为Cd、Cu、Zn、Pb和As,主要集中在底层和次表层。     

工业用煤气燃烧装置二氧化硫减排方式的讨论

工业用煤气是工业生产中普遍采用的气体燃料,煤气燃烧过程会产生二氧化硫,减少煤气燃烧过程的二氧化硫排放可采用煤气脱硫和烟气脱硫两种方式。本文通过对煤气脱硫工艺及烟气脱硫工艺原理及参数进行对比的方式,讨论工业用燃气燃烧装置的两种二氧化硫减排方式的优缺点,为该类装置脱硫设计提供参考。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

Greenhouse gas mitigation and offset options for suckler cow farms: an economic comparison for the Swiss case

We assessed the economic suitability of 4 greenhouse gas (GHG) mitigation options and one GHG offset option for an improvement of the GHG balance of a representative Swiss suckler cow farm housing 35 Livestock units and cultivating 25 ha grassland. GHG emissions per kilogram meat in the economic optimum differ between the production systems and range from 18 to 21.9 kg CO₂-eq./kg meat. Only GHG offset by agroforestry systems showed the potential to significantly reduce these emissions. Depending on the production system agroforestry systems could reduce net GHG emissions by 66% to 7.3 kg CO₂-eq./kg meat in the most intensive system and by 100% in the most extensive system. In this calculation a carbon sequestration rate of 8 t CO₂/ha/year was assumed. The potential of a combination of the addition of lipids to the diet, a cover of the slurry tank and the application of nitrification inhibitors only had the potential to reduce GHG emissions by 12% thereby marginal abatement costs are increasing much faster than for agroforestry systems. A reduction of the GHG emissions to 7.5 kg CO₂-eq./kg meat—possible with agroforestry only—raised costs between 0.03 CHF/kg meat and 0.38 CHF/kg meat depending on the production system and the state of the system before the reduction. If GHG emissions were reduced maximally average costs ranged between 0.37 CHF/kg meat, if agroforestry had the potential to reduce net GHG emissions to 0 kg CO₂-eq., to 1.17 CHF/kg meat if also other options had to be applied.