实用高效的油烟净化技术及设备

随着餐饮业的快速发展 ,油烟的污染日益严重。探讨分析了目前油烟污染的净化处理现状 ,论述了新型高效的油烟净化技术机理 ,从而开发研制出经济实用的油烟净化设备 ,为我国控制油烟污染开辟了新途径     

长江、嘉陵江(重庆段)源水有机提取物的类雌激素活性评价

为了解长江、嘉陵江(重庆段)源水有机提取物的类雌激素活性，分别于夏季和冬季采用GDX—120大孔树脂对位于城区上、中、下游5个断面长江、嘉陵江(重庆段)源水进行有机物的浓缩提取。用体外MCF—7细胞增殖试验检测有机提取物的类雌激素活性。结果显示，源水有机提取物均具有类雌激素活性。其类雌激素活性中、下游均高于上游，丰水期高于枯水期。     

Lead,zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l(-1) Pb, 2.5, 5, 10, 20 and 30 mg (l-1) Zn, or 0.25, 0.50, 1 and 2 mg l(-1) Cu for 14 days, respectively, then tolerance index (TI) and EC50 (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu.     

介质特性对DBD降解苯的影响

为了提高介质阻挡放电(dielectric barrier discharge,DBD)等离子体的处理效率,研究了内外介质组成分别为:(1)石英 石英;(2)陶瓷 石英;(3)陶瓷 陶瓷这3种情况下苯的降解情况.试验结果表明,在处理低浓度含苯废气时,陶瓷 陶瓷效果最好;陶瓷(内管) 石英(外管)在处理高浓度含苯废气时显示出优势.通过对气相产物和固相结焦产物的分析验证了DBD能有效降解苯,降解产物不会带来新的污染.进一步分析了实验条件和介质材料的变化对DBD降解苯的影响机理.     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

基于恢复效度的三峡升船机驱动系统失效危害性TOPSIS评估

三峡升船机驱动系统故障模式的危害性直接关系到升船机的安全运行。为判定故障模式危害度等级,根据运行情况,结合同类型升船机,选取了驱动系统的5类故障模式;引入恢复效度的概念,运用德尔菲法对恢复效度、发生频度、严酷度和可探测度进行等级划分并利用AHP法确定各评估指标的权重;最后通过TOPSIS方法建立了数学模型,对三峡升船机驱动系统故障模式的危害性进行了分析、排序和验证。结果表明:恢复效度与故障危害性关联最为密切,齿轮和齿条故障对升船机的危害性最大,其次分别是减速器、同步轴系统、小齿轮托架以及万向轴等。此方法为有针对性的制定相关弥补措施和对策提供了依据,也为三峡升船机其他关键机构失效危害性分析提供了参考。     

黄海近岸底栖贝类体内典型有机污染物分布

根据第二次全国海洋污染基线凋查数据,确定黄海近岸底栖贝类体内典型有机污染物的含量、分布及其潜在的生态风险.结果表明,在35%以上的站点,物种体内石油烃含量超过国家海洋生物质量第一类标准(15 000 ng/g),大连湾附近海域贝类体内含量甚至高出第二类标准(50 000 ng/g).在威海、大连湾和胶州湾出现多环芳烃和酞酸酯少数相对高值站点(300 ng/g左右),而其它大多数站点贝类体内多环芳烃和酞酸酯的含量都较低.中、高环组分占优指示近岸海区的多环芳烃主要来源于热解过程;二丁基酞酸酯和2-乙基己基酞酸酯是酞酸酯的主要组分.在所有站点,底栖贝类体内PCBs的含量普遍很低(<10 ng/g).贝类体内DDTs含量超过第一类标准(10 ng/g)的站点大部分集中在南黄海沿岸,海州湾内一站点已超出第二类标准(100 ng/g),而组分以代谢产物DDD和DDE为主.在所有站点的贝类体内都有p,p'-DDT检出,尤其在北黄海的大连湾和蓬莱附近海区(比例高于50%),指示周边地区存在潜在的DDT输入源.据此,大连湾、威海、胶州湾沿岸贝类体内石油烃和多环芳烃含量较高,胶州湾、海州湾附近海域贝类体内DDTs含量较高,这些属于较高生态风险区,而大连湾、蓬莱近岸可能的DDT新输入对底栖环境构成一定威胁.     

仓面浇筑立体空间冲突致灾过程建模与伤害评价*

为定量评价大坝浇筑过程空间冲突致灾事故后果,通过对缆机运输典型情景进行危害能量运动分解,确定在水平和竖直方向运动方式,阐述危害能量在流动路径相互转化形式;根据能量守恒定律,分析危害能量在吊罐与承灾体碰撞接触之间转移规律,将吊罐与人头部接触过程抽象为带强阻尼的弹簧振子系统,建立危害能量与碰撞冲量相等的动量方程,量化空间冲突致灾后果。结果表明:吊罐坠落危害能量极大,产生的碰撞冲击力与吊罐的运输速度、高度呈正相关,与阻力系数呈负相关,风速、载重对其影响较大。对比2种不同碰撞情景发现,机械碰撞因顶部承载力缓冲,对人头部产生伤害远小于直接碰撞,并对碰撞结果分级评价,研究结果可为大坝浇筑交叉作业空间冲突致灾风险评价提供参考。     

基于保护的瓷窑型遗址绿化改造研究——以长沙铜官窑遗址为例

瓷窑型遗址由于其埋藏浅、需要恒温恒湿等特点,对绿化的要求与其它遗址不尽相同。基于保护为主的绿化改造是瓷窑型遗址保护的重要内容。文章以长沙铜官窑遗址为例,在分析了长沙铜官窑遗址的植被组成、绿化现状以及现有植被对遗址保护的利弊基础上,提出了基于保护为主的绿化改造总体设想、主要对策措施和技术模式,希望为中国瓷窑型遗址的绿化改造提供借鉴。     

纯氧曝气与空气曝气处理生活污水的效果比较

研究纯氧曝气与空气曝气对好氧装置处理生活污水效果以及对NH3和H2S产生量的影响。试验结果表明,与空气曝气相比,纯氧曝气的COD去除率高2.57%,NH3-N去除率高9.59%;处理7L相同体积的污水,空气曝气吹脱出的NH3是纯氧曝气的3.4倍,吹脱出的H2S平均值为12.99 ug,远大于纯氧曝气装置的0.38 ug。