厌氧折流板反应器处理硝基苯废水的研究

采用厌氧折流板反应器(ABR)中温处理含硝基苯废水,研究了工艺条件和硝基苯的降解特点.试验结果表明:在进水COD浓度为2088 mg/L,硝基苯浓度为16.8 mg/L,反应温度为35℃,停留时间为24 h条件下,ABR能有效处理硝基苯废水,COD去除率为86.4%,硝基苯去除率为91.1%;在厌氧条件下,硝基苯降解为苯胺,但苯胺很难再进一步分解;硝基苯的去除历程推断为先吸附后分解.     

青霉菌HHE-P7利用酱油废水产生微生物絮凝剂的研究

研究了微生物絮凝剂产生菌HHE-P7在酱油废水中产生微生物絮凝剂的絮凝特性。实验表明，酱油废水由于碳源丰富，是一种良好的培养基。HHE-P7菌最佳培养条件为：COD20000mg／L，K2HP041．0g／L，培养3d。最佳絮凝条件为在1L高岭土水中投加10～15mL微生物絮凝剂（MBF7），pH调至9，则絮凝率为90％以上；微生物絮凝荆在水系中主要起吸附架桥的作用。     

锶—89在珍珠岩中吸附的研究

研究了不同粒径的珍珠岩对＾８９Ｓｒ的吸附。结果表明，珍珠岩对＾８９Ｓｒ具有较强的吸附能力，饱和吸附率大于９５％；通过振荡能加速珍珠岩对＾８９Ｓｒ的吸附；珍珠岩对＾８９Ｓｒ的吸附率与时间关系由多项指数描述；不同粒径的珍珠岩对＾８９Ｓｒ的吸附率没有明显差异。     

水解酸化-缺氧法处理采油废水的污染物迁移降解试验研究

水解酸化．缺氧法对采油废水有较好的处理效果，采用GC／MS技术对水解酸化-缺氧法处理采油废水过程中污染物的迁移降解进行的研究表明：水解酸化段和缺氧段对采油废水中碳原子为C6-C9、分子量为100—140的有机物均有较好的降解能力。其中，在水解酸化段中酮类、芳烃得到较好的降解，缺氧段中酚类和醚类化合物降解明显。水解酸化-缺氧工艺对于采油废水中的甲苯和二甲苯具有较好的降解能力。     

粉末活性炭对膜过滤性能的影响

向一体式膜生物反应器中投加粉末活性炭(PAC),可以显著提高膜的过滤性能,有效缓解膜的污染.研究结果表明:投加PAC的吸附作用减少了由于胞外聚合物(EPS)而引起的膜污染;膜表面PAC颗粒的存在减小了浓差极化层的厚度和水力边界层的厚度,提高了过滤物质的传递速率;膜表面形成的PAC层还可过滤微生物和胶体颗粒,减少了它们到达膜表面的数量.     

氰化尾渣制备微电解填料及降解甲基橙研究

以氰化尾渣为原料,采用煤基直接还原工艺制备铁碳微电解填料,并将填料用于处理甲基橙等模拟废水.研究了焙烧温度、焙烧时间、煤用量等制备条件对填料降解甲基橙的影响.结果表明,在焙烧温度为1250℃,焙烧时间为60min,煤用量为30%的条件下制备的微电解填料对甲基橙废水的脱色效果最好.提高填料用量和降低溶液初始pH值有利于去除甲基橙.用于处理400mL浓度为100mg/L的甲基橙溶液,在填料用量为2g,溶液初始pH值在3~6的范围内,当降解时间为30min时,甲基橙脱色率均接近100%.XRD分析表明,最佳条件下制备的填料中主要结晶物相为零价铁.SEM显示填料中的零价铁颗粒粒度均在50μm以下,零价铁与残碳构成微电解填料.     

浅水湖泊水生植物适宜生物量评估方法的探讨

总结了水生植物对湖泊生态系统的影响、水生植物生物量控制与收割管理的研究,分析了目前浅水富营养化湖泊恢复过程中水生植物生物量确定方法的不足;立足于水生植物生长特点,提出了基于湖泊生态模型的浅水湖泊大型水生植物在生长期和衰亡期的适宜生物量评估方法的研究框架,本文可为指导湖泊生态修复工程及其后续维护,为完善健康湖泊的综合评价标准和湖泊生态修复理论提供科学支撑.     

碧流河水库细菌群落结构特征及其关键驱动因子

为了解碧流河水库细菌群落结构及其多样性变化,探讨环境因子对其的影响,于2016~2017年应用16S r DNA高通量测序技术,分析比较了碧流河水库一年周期内4个季节的细菌群落结构及其多样性差异,使用冗余分析(redundancy analysis,RDA)探讨水体环境因子与细菌群落结构及其多样性的关系.结果表明,全年碧流河水库细菌群落多样性指数(ShannonWiener指数)平均达6.9,冬季夏季春季秋季.序列比对结果显示,除了分类地位不明确的菌群和稀有菌群外,共发现了细菌44门115纲184目368科865属,优势菌门为变形菌门Proteobacteria 34.16%,蓝菌门Cyanobacteria 24.35%,放线菌门Actinobacteria 13.35%,拟杆菌门Bacteroidetes 12.42%.优势菌门变形菌门中优势菌纲为β-变形菌纲β-Proteobacteria18.34%,优势菌属为unidentified_Chloroplast 17.73%;RDA结果表明不同菌群受环境因子影响不同,悬浮物(TSS)、透明度(SD)、酸碱度(p H)、活性磷(ADP)、溶氧(DO)、总磷(TP)、亚硝酸氮(NO-2-N)为影响群落分布主要的环境因子,其中夏季菌群与NO-2-N、ADP、TP和TSS显著正相关.     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.     

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Aluminum formate (AF), a degradable and non-corrosive coagulant, was synthesized from aluminum hydroxide and formic acid. Polyamidine (PA), as a coagulation aid, was combined with AF for dye wastewater treatment. AF was characterized by XPS, FT-IR, viscosity, zeta potential, mass spectrum and XRD, and the flocculation properties of the dual-coagulation system were characterized by FT-IR and SEM. The results showed that COOH, Al₂O₃-Al and O₂-Al bonds were formed in the AF synthesis process, and AF had a higher molecular weight and higher charge neutralization ability than PAC. The hydrolysates of AF were determined to contain Al₁₃ Al₁₁ and Al₂, and the components of AF were confirmed to comprise a mixture including aluminum formate (C₃H₃AlO₆) and its hydrate. When the color removal efficiency reached 100% in jar tests, the optimized dosage of AF/PA was 18.91/0.71 mg/L, while the optimized dosage of PAC/PA was 21.19/0.91 mg/L. According to the variance analysis, the interaction between AF/PA and PAC/PA were insignificant in macroscopic view. FT-IR spectrum indicated AF captured pollutant by means of CCO bond, PAC captured pollutant by δ CH, CC and δ CH. Overall, although the coagulation mechanism of AF was different from that of PAC, AF/PA showed better coagulation efficiency than PAC/PA in dye wastewater treatment.