Enhancing performance and durability of slag made from incinerator bottom ash and fly ash

This work presents a method capable of melting the incinerator bottom ash and fly ash in a plasma furnace. The performance of slag and the strategies for recycling of bottom ash and fly ash are improved by adjusting chemical components of bottom ash and fly ash. Ashes are separated by a magnetic process to improve the performance of slag. Analytical results indicate that the air-cooled slag (ACS) and magnetic-separated slag (MSS) have hardness levels below 590 MPa, indicating fragility. Additionally, the hardness of crystallized slag (RTS) is between 655 and 686 MPa, indicating toughness. The leached concentrations of heavy metals for these three slags are all below the regulatory limits. ACS appears to have better chemical stability than MSS, and is not significantly different from RTS. In the potential alkali-silica reactivity of slag, MSS falls on the border between the harmless zone and the potentially harmful zone. ACS and RTS fall in the harmless zone. Hence, the magnetic separation procedure of ashes does not significantly improve the quality of slag. However, RTS appears to improve its quality.     

The implementation of a human factors engineering checklist for human–system interfaces upgrade in nuclear power plants

The primary purpose of this paper is to provide a human factors engineering (HFE) checklist for human–system interfaces (HSIs) upgrades in nuclear power plants (NPPs). The HFE checklist is used to review the HSIs design submittals prepared by licensees or applicants for a license or design certification of a HSI upgrade. NUREG-series regulation documents are used to develop the main frame of the initial HFE checklist. The contents of the HFE checklist are constructed by the theories and principles governing human factors. Then, verification and validation (V&V) of the HFE checklist is accomplished by validity and reliability evaluation. The results show that the HFE checklist has sufficient validity and reliability for the review of HSI upgrades in NPPs.     

Determination of volatile organic profiles and photochemical potentials from chemical manufacture process vents

The main objective of this study was to monitor the volatile organic compounds (VOCs) in the stack gas released from organic chemical industrial plants to determine emission factors. Samples from 52 stacks, with or without air pollution control devices (APCDs), from seven industrial processes were taken and VOCs measured using U.S. Environmental Protection Agency (EPA) Method 18. These 7 processes, including 26 plants, were the manufacturers of acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polystyrene (PS), acrylic resin (ACR), vinyl chloride (VC), para-terephthalic acid (PTA), and synthetic fiber (SYF). The results clearly indicate significant variations of emission factors among the various industrial processes, particularly emission factors for those without APCDs. As expected, those with APCDs yield much less emission factors. Regardless of those with or without APCDs, the order of manufacturing processes with regard to VOC emission factors is SYF > ABS > PS >ACR > PTA > PVC > VC. The emission factors for some processes also differ from those in EPA-42 data file. The VOC profiles further indicate that some VOCs are not listed in the U.S. VOC/Particulate Matter Speciation Data System (SPECIATE). The potential O3 formation is determined from the total amount of VOC emitted for each of seven processes. The resultant O3 yield varied from 0.22 (ACR) to 2.33 g O3 g(-1) VOC (PTA). The significance of this O3 yield is discussed.     

Model Development and Calibration of a Saltwater Intrusion Model in Southern California1

Abstract: A nine‐layered confined‐unconfined flow and transport model is developed for the Alamitos saltwater intrusion barrier in Southern California. The conceptual model is based on the geological structure of the coastal aquifer system. The key parameters in the flow and transport models are calibrated using a two‐phase procedure which matches the types of data available for calibration. Because of the abundance of point measurements of hydraulic conductivity, the heterogeneous and random hydraulic conductivity field for each of the five aquifers is estimated by the geostatiscal method of natural‐neighbor‐kriging in Phase 1. In Phase 2, the longitudinal and transverse dispersivities in the transport model are estimated by a traditional inverse procedure that minimizes the least‐squares error for concentration (LSE‐CON). The minimum LSE‐CON is achieved near 15.2 and 1.52 m for the longitudinal and transverse dispersivities, respectively. Additional simulations with increasing transport parameter complexity did not yield significant improvements in LSE‐CON. Also, tracking least‐squares error for head while parametrically varying the transport parameters revealed there is a negligible interaction between predicted head and transport parameters.     

Association between fetal nuchal translucency thickness in first trimester and subsequent gestational hypertension and preeclampsia

Increased fetal nuchal translucency (NT) in the first trimester is associated with adverse pregnancy outcomes. Whether the increased NT is also associated with an increased frequency of pregnancy-associated hypertension (PAH) is not known. Seven hundred and seventy-nine pregnant women who received NT-based Down syndrome screening and delivered their babies at our hospital by September 2000 were enrolled into this study. Among these women, there are 46 cases of preeclampsia, 68 cases of gestational hypertension (GH); 665 women without any adverse pregnancy outcomes served as controls. Correlation analysis demonstrated that NT MoM (multiples of median) level had a positive association with maternal diastolic blood pressure at the time of admission for delivery (r = 0.104; p < 0.01). The severity of PAH was concordant with the stepwise increase of mean NT MoM level, which was 0.88 in control, 1.07 in gestational hypertension, and 1.13 in preeclampsia (p < 0.001). Using the 95th (1.52 MoM) and 90th (1.31 MoM) percentiles of NT thickness as cut-offs, the sensitivities and odds ratios of the women at risk for developing GH after 20 weeks of gestation were 8.8%, 19.1% and 1.98, 2.15 respectively, while for preeclampsia were 10.9%, 28.3% and 2.49, 3.58 respectively. It is concluded that the pathological changes in the placenta responsible for the development of PAH may also influence the physiological decrease of NT thickness in late first trimester. However, the sensitivity of fetal NT measurement in first trimester is not sufficient as a single marker for predicting the pregnant women at risk for subsequent PAH. Copyright © 2002 John Wiley & Sons, Ltd.     

Relationship between air pollution and daily mortality in a subtropical city: Taipei, Taiwan

Air pollution has been associated with daily mortality in numerous studies over the past decade. However most of these studies were conducted in the United States and Europe with relatively few done in Asia. In the current study, the association between ambient air pollution and daily mortality in Taipei, Taiwan's largest city which has a subtropical climate was undertaken, for the period 1994-1998 using a case-crossover analysis. This design is an alternative to Poisson time series regression for studying the short-term adverse health effects of air pollution. The air pollutants examined included particulate matter (PM(10)), sulfur dioxide (SO(2)), ozone (O(3)), nitrogen dioxide (NO(2)), and carbon monoxide (CO). The largest observed effect, which was without statistical significance, was seen for NO(2) and CO levels on deaths due to respiratory diseases (ORs=1.013 and 1.014, respectively). The well established link between air pollution levels and daily mortality may not be as strong in cities in subtropical areas, although other factors such as differences in pollutant mix or the underlying health of the population may explain the lack of a strong association in this study. Further studies of this type in cities with varying climates and cultures are needed.     

The research on extracting the information of human errors in the main control room of nuclear power plants by using Performance Evaluation Matrix

Digitalized nuclear instruments and control systems have been the main stream design for the main control room (MCR) of advanced nuclear power plants (NPPs) nowadays. Digitalization of human–system interface (HSI) could improve human performance and, on the other hand, could reduce operators’ situation awareness as well. It might cause that humans make wrong decision during an emergency unintentionally. Besides, digital HSI relies on computers to integrate system information automatically instead of human operation. It has changed the operator’s role from mainly relating operational activity to mainly relating monitoring. However, if the operators omit or misjudge the information on the video display units and wide display panel, the error of omission and error of commission may occur. This study applies Content Category Analysis (CCA) and Performance Evaluation Matrix (PEM) methods to explore the potential problems in the MCR of advanced NPPs which are caused by human errors. The results show that the potential problems that would probably contribute to the human performance of MCR in the advanced NPPs are multiple accidents, pressure level, number of operators, and other factors such as working environmental. The conclusions of this research may be considered to avoid and prevent human errors in the human factor related researches especially in the nuclear safety field.     

Assessing nitrate contamination and its potential health risk to Kinmen residents

Kinmen is located in the southwest of Mainland China. Groundwater supplies 50% of the domestic water use on the island. Residents of Kinmen drink groundwater over the long term because surface water resources are limited. Nitrate–N pollution is found and distributed primarily in the western part of groundwater aquifer whereas saline groundwater is distributed to the northeastern Kinmen. This work applied the DRASTIC model to construct the vulnerability map of Kinmen groundwater. MT3D was then used to evaluate the contamination potential of nitrate–N. The health risk associated with the ingestion of nitrate–N contaminated groundwater is also assessed. The results from DRASTIC model showed that the upland crop and grass land have high contamination potential, whereas the forest, reservoir and housing land have low contamination potential. The calibrated MT3D model inversely determined the high strength sources (0.09–2.74 kg/m²/year) of nitrate contaminant located in the west to the north west area and required 2–5 years travel time to reach the monitoring wells. Simulated results of MT3D also showed that both the continuous and instantaneous contaminant sources of nitrate–N release may cause serious to moderate nitrate contamination in the western Kinmen and jeopardize the domestic use of groundwater. The chronic health hazard quotient (HQ) associated with the potential non-carcinogenic risk of drinking nitrate–N contaminated groundwater showed that the assessed 95th percentile of HQ is 2.74, indicating that exposure to waterborne nitrate poses a potential non-cancer risk to the residents of the island. Corrective measures, including protecting groundwater recharge zones and reducing the number of agricultural and non-agricultural nitrogen sources that enters the aquifer, should be implemented especially in the western part of Kinmen to assure a sustainable use of groundwater resources.     

Adsorption of acid dye onto activated carbons prepared from agricultural waste bagasse by ZnCl2 activation

A series of activated carbons were prepared from agricultural waste sugarcane bagasse by chemical activation with zinc chloride (ZnCl2) as an activating agent at 500 degrees C and 0.5 h soaking time. The Langmuir surface area and total pore volume were used to estimate the average pore diameter of the carbon products. The values of the surface area and pore volume increased linearly with increase in the impregnation ratio (IR) up to 100 wt%. The adsorption capacities of the derived adsorbents for Acid Orange 10 were measured at 20 degrees C and 40 degrees C to gain further insights into the acidic surface oxides of the adsorbent from the results of Fourier transform infrared (FTIR) spectroscopy analysis and pH measurement. Adsorption isotherms of the acid dye on adsorbents prepared were determined and correlated with common isotherm equations. It was found that the Langmuir model appears to fit the isotherm data better than the Freundlich model. The physical properties of these adsorbents were consistent with the parameters obtained from the isotherm equations.     

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.