Underlying causes of habitat-associated differences in size of age-0 walleye pollock (Theragra chalcogramma) in the Gulf of Alaska

Age-0 walleye pollock (Theragra chalcogramma) caught in September in the Gulf of Alaska display habitat-associated differences in standard length (SL). Age-0 fish collected in the region around Sutwik Island and 375?km farther downstream near the Shumagin Islands most likely originate from the Shelikof Strait spawning aggregation. However, age-0 fish resulting from the same spawning aggregation differ in mean size up to 20?mm between areas by September. We examined the otoliths of the larval and age-0 stages of walleye pollock from these two areas in 2000 and 2001 to determine whether growth rate, hatch date, and/or temperature influenced fish size. Circulation models were used to determine whether transport of larvae from an upstream spawning group into the study areas could have occurred. Mean in situ temperature during sampling periods was not defined as a significant factor in altering growth rates. Overlapping hatch date distributions of the larval and age-0 fish in the Shumagin Island area confirmed that the fish were from the Shelikof Strait spawning group. Comparison of hatch date distributions in the upstream Sutwik Island area revealed larger/older larvae from an upstream spawning group mixed with larvae from the Shelikof Strait spawning group. Our results suggest that the offset of 20?mm SL between the groups of age-0 pollock was the result of a combination of enhanced survivorship of early-hatched larvae in the Sutwik area and the introduction and retention of the progeny of another spawning group originating upstream of Shelikof Strait.     

Mapping civil society: the ecology of actors in the Toronto region greenbelt

ABSTRACT

Civil society’s potential as a force for solving complex societal problems – particularly those that require a challenge to the status quo – has provoked practical and theoretical interest, with its potential largely reliant on the perception that it is a ready if variable source of social capital resources. However, there are no guarantees that civil society will use its social capital for the greater good. Civil society encompasses a range of groups, some more inward-looking and oriented to private interests, and others more outward-looking and oriented to public interests. This divergent character of civil society was evident in the three campaigns for greenspace protection that eventually led to the creation of the Toronto region greenbelt, where civil society organisations (CSOs) from both growth and conservation camps contended for influence, each succeeding at different times. But over time (a time when state actors were increasingly in need of non-state partners to help solve complex governance problems), coalitions of environmental CSOs in the three campaigns – to protect the Niagara Escarpment, Oak Ridges Moraine and surrounding countryside – became more effective at influencing government to protect greenspace. A comparison of the coalitions using a framework based on key attributes of CSOs – missions and memberships – suggests that the environmental coalitions were more effective when they recruited more members with a diverse set of resources arising from both bonding and bridging social capital. In general, the more inclusive and public-interested the CSOs, the more effective the challenge to the status quo.     

Applying 3DCE to environmentally responsible manufacturing practices

A review of recent literature in the fields of operations, supply chain, and management indicates there is on-going interest in improving new product development (NPD) performance. Three-dimensional concurrent engineering (3DCE), the simultaneous design of product, process and supply chain have been proposed as a way to improve traditional NPD outcomes, such as reduced time to market, lower costs, and improved customer acceptance. There appears to be a lesser concern associated with the environmental impacts of new products. Environmentally responsible manufacturing (ERM) on new product development focuses on reduced emissions, hazardous materials elimination, and lower product weight without sacrificing functionality. This paper explores the following issue: will employing 3DCE to integrate NPD and ERM yield better benefits than the separate and uncoordinated application of environmental goals and NPD initiatives?     

Improving occupancy estimation when two types of observational error occur: non-detection and species misidentification

Efforts to draw inferences about species occurrence frequently account for false negatives, the common situation when individuals of a species are not detected even when a site is occupied. However, recent studies suggest the need to also deal with false positives, which occur when species are misidentified so that a species is recorded as detected when a site is unoccupied. Bias in estimators of occupancy, colonization, and extinction can be severe when false positives occur. Accordingly, we propose models that simultaneously account for both types of error. Our approach can be used to improve estimates of occupancy for study designs where a subset of detections is of a type or method for which false positives can be assumed to not occur. We illustrate properties of the estimators with simulations and data for three species of frogs. We show that models that account for possible misidentification have greater support (lower AIC for two species) and can yield substantially different occupancy estimates than those that do not. When the potential for misidentification exists, researchers should consider analytical techniques that can account for this source of error, such as those presented here.     

Functional flax fiber with UV-induced switchable wettability for multipurpose oil-water separation

● A PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed. ● The property of flax fiber could be switched from hydrophobicity to hydrophilicity. ● The mechanism of the acquired UV-induced switchable wettability was discussed. ● The developed flax fiber was successfully used for multipurpose oil-water separation. The large number of oily wastewater discharges and oil spills are bringing about severe threats to environment and human health. Corresponding to this challenge, a functional PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed for efficient oil-water separation in this study. The developed flax fiber was obtained through PAA grafted polymerization and then ZnO-HDTMS nanocomposite immobilization. The as-prepared PAA-ZnO-HDTMS flax fiber was hydrophobic initially and could be switched to hydrophilic through UV irradiation. Its hydrophobicity could be easily recovered through being stored in dark environment for several days. To optimize the performance of the PAA-ZnO-HDTMS flax fiber, the effects of ZnO and HDTMS concentrations on its switchable wettability were investigated. The optimized PAA-ZnO-HDTMS flax fiber had a large water contact angle (~130°) in air and an extremely small oil contact angle (~0°) underwater initially. After UV treatment, the water contact angle was decreased to 30°, while the underwater oil contact angle was increased to more than 150°. Based on this UV-induced switchable wettability, the developed PAA-ZnO-HDTMS flax fiber was applied to remove oil from immiscible oil-water mixtures and oil-in-water emulsion with great reusability for multiple cycles. Thus, the developed flax fiber could be further fabricated into oil barrier or oil sorbent for oil-water separation, which could be an environmentally-friendly alternative in oil spill response and oily wastewater treatment.     

Size–frequency dynamics of NE Pacific abyssal ophiuroids (Echinodermata: Ophiuroidea)

The 17-year time-series study at Station M in the NE Pacific has provided one of the longest datasets on deep-sea ophiuroids to date. Station M is an abyssal site characterized by low topographical relief and seasonal and interannual variation in surface-derived food inputs. From 1989 to 2005, over 31,000 ophiuroid specimens were collected. Size–frequency distributions of the four dominant species, Ophiura bathybia, Amphilepis patens, Amphiura carchara and Ophiacantha cosmica, were examined for recruitment and the role of surface-derived food supplies on body size distributions. Juveniles were collected in sediment traps and used to investigate settlement patterns and seasonality. Trawl samples showed no indication of seasonal changes in recruitment to larger size classes; however, there was evidence of seasonal settling of juveniles. Interannual differences in median disk diameters and size distributions of trawl-collected adults are greater than those at the seasonal scale. Three of the four species, O. bathybia, A. patens and O. cosmica, had co-varying monthly median disk diameters, suggesting they may have a similar factor(s) controlling their growth and abundance. Interannual differences in monthly size distributions were generally greater than those between seasons. Cross-correlations between the particulate organic carbon (POC) flux (food supply) and size distribution indices for O. bathybia, A. patens and O. cosmica all were significant indicating that increases in food supply were followed by increases in the proportion of smaller size classes after approximately 17–22 months. These findings suggest that food inputs are indeed an important factor influencing deep-sea ophiuroid populations on interannual time scales, more generally supporting the long-hypothesized connection between food availability and population size structure in the deep sea. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The global re-cycling of persistent organic pollutants is strongly retarded by soils

'Persistent organic pollutants' (POPs) are semi-volatile, mobile in the environment and bioaccumulate. Their toxicity and propensity for long-range atmospheric transport (LRAT) has led to international bans/restrictions on their use/release. LRAT of POPs may occur by a 'single hop' or repeated temperature-driven air-surface exchange. It has been hypothesised that this will result in global fractionation and distillation-with condensation and accumulation in polar regions. Polychlorinated biphenyls (PCBs)--industrial chemicals banned/restricted in the 1970s--provide a classic illustration of POP behaviour. A latitudinally-segmented global PCB inventory has been produced, which shows that approximately 86% of the 1.3 x 10(6) tonnes produced was used in the temperate industrial zone of the northern hemisphere. A global survey of background surface soils gives evidence for 'fractionation' of PCBs. More significantly, however, very little of the total inventory has 'made the journey' via primary emission and/or air-surface exchange and LRAT out of the heavily populated source regions, in the 70 years since PCBs were first produced. Soils generally occlude PCBs, especially soils with dynamic turnover of C/bioturbation/burial mechanisms. This limits the fraction of PCBs available for repeated air-soil exchange. The forested soils of the northern hemisphere, and other C-rich soils, appear to be playing an important role in 'protecting' the Arctic from the advective supply of POPs. Whilst investigations on POPs in remote environments are important, it is imperative that researchers also seek to better understand their release from sources, persistence in source regions, and the significant loss mechanisms/global sinks of these compounds, if they wish to predict future trends.     

Vegetation associated with different walking track types in the Kosciuszko alpine area, Australia

Tourism infrastructure such as walking tracks can have negative effects on vegetation including in mountain regions. In the alpine area around continental Australia's highest mountain, Mt Kosciuszko (2228 m), there is a range of walking tracks (paved, gravel and raised steel mesh surfaces) in addition to an extensive network of informal/non-hardened tracks. Vegetation characteristics were compared between track types on/under tracks, on the track verge, and in the adjacent native vegetation. For a raised steel mesh walkway there was no difference in vegetation under the walkway, on the verge, and 3m away. In contrast, for a non-hardened track there was 35% bare ground on the track surface but no other detectable impacts. Gravel and paved tracks had distinct verges largely comprising bare ground and exotic species. For non-hardened tracks there was an estimated 270 m2 of disturbance per km of track. For wide gravel tracks the combined area of bare ground, exotic plants and gravel was estimated as 4290 m2 per km, while for narrow gravel tracks it was estimated as 2940 m2 per km. For paved tracks there was around 2680 m2 per km of damage. In contrast, there was no detectable effect of raised steel mesh walkway on vegetation highlighting some of the benefits of this surface over other track types.     

An Automated Technique for Delineating and Characterizing Valley-Bottom Settings

Accurate delineation and characterization of valley-bottom settings is crucial to the assessment of the biological and geomorphological components of riverine systems; yet, to date, most valley-bottom mapping endeavors have been done manually. To improve this situation, we developed automated techniques in a Geographic Information System (GIS) for delineating and characterizing valley-bottom settings in river basins ranging in size from approximately 1,000–10,000 km². All procedures were developed with ARC/INFO GIS software and fully automated in Arc Macro Language (AML). The GRID module is required for valley-bottom delineation and slope calculations; whereas characterization (i.e., measuring the width of the valley-bottom zone) requires Coordinate Geometry (COGO) in the ARCEDIT module. The process requires three inputs: a polygon coverage of the analysis area; an arc coverage of its hydrography, and a grid representing its digital elevation. The AML is designed to operate within a wide range of computer memory/disk space options, and it allows users to customize several procedures to match the scale and complexity of a given analysis area with available computer hardware.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.