UASB法处理城市生活垃圾焚烧场渗滤液

垃圾焚烧场的渗滤液具有pH低、污染成分复杂、COD_(Cr)浓度高、可生化性好等特点。本研究探索了UASB法处理焚烧场渗滤液时的快速启动方法,考察了水力停留时间、容积负荷对COD_(Cr)去除率的影响及产气量与COD_(Cr)去除率的关系,结果表明,在水力停留时间6d、容积负荷5kg/(m3.d)的情况下,COD_(Cr)去除率可达到93%,每升原水产气量可达22.5L,折合热值492.7kJ。     

Modeling methyl isothiocyanate soil flux and emission ratio from a field following a chemigation of metam-sodium

Metam-sodium had become the most heavily used soil fumigant in recent years as the deadline approached for methyl bromide to phase out in January 2005. After application, metam-sodium decomposes rapidly to methyl isothiocyanate (MITC), a highly toxic compound capable of killing a wide spectrum of soil-borne pests. Inhalation risk of MITC ranked high among airborne agricultural pesticides in California. Information about off-gassing intensity and percentage of emission is essential for exposure risk assessment and mitigation measures, but is limited, especially for new application methods such as drip chemigation. Air concentrations of MITC were monitored around a field treated with metam-sodium through surface drip irrigation system. The field was tarped with plastic films before the chemigation. The air concentrations at receptor locations were simulated for the period of air monitoring with the Industrial Source Complex (ISC3) Dispersion Model, and soil flux density of MITC at various periods after chemigation was estimated through a back-calculation procedure. The estimated soil flux density of MITC showed a diurnal pattern, with the daytime flux stronger than nighttime. However, the average air concentration at nighttime was higher than that at daytime. Soil flux density peaked at 4.30 microg m-2 s-1 in the first 12-h period after chemigation, then declined with time. The MITC emission percentage in the first 60-h was 2.65% of applied mass, of which 57% occurred in the first 24-h after chemigation. The study indicated that the tarped bed drip application method of metam-sodium had a relatively good control of MITC emission from soil.     

应用T-RFLP技术研究五氯酚对好氧颗粒污泥中细菌组成的影响

研究了五氯酚(PCP)对好氧颗粒污泥处理生活污水的影响,借助末端限制性酶切片段长度多态性(T-RFLP)技术考察了PCP存在时好氧颗粒污泥细菌组成的变化.结果表明,PCP对氨氮去除率的影响大于对COD去除率的影响,好氧颗粒污泥中微生物的种群数量随着PCP浓度的增加而逐渐减少,氨氮和COD去除率的变化与微生物种群数量变化相吻合.根据对PCP的敏感程度,好氧颗粒污泥中的微生物可分以下几类:①对PCP高度敏感的微生物,可能是Microbacterium或Streptococcus等以及2种未被报道的菌种;②对PCP中度敏感的微生物,可能是Corynebacterium或Nevskia等以及1种未被报道的菌种;③对PCP低度敏感的微生物,可能是Mycoplasma或Exiguobacterium等以及1种未被报道的菌种;④对PCP耐受性强的微生物,这类微生物主要是13个末端限制性片段(69、71、82、175、198、241、229、232、233、240、245、269、449bp)所代表的微生物,PCP浓度为30mg/L时,长度为82bp和175bp的片段的相对面积分别22.7%和13%,所代表的微生物已经演替为优势菌群.     

流动注射催化光度法测定环境水样中的痕量亚硝酸根

基于在pH为2.7的一氯乙酸缓冲溶液中亚硝酸根对溴酸钾氧化亮绿具有催化作用,建立了测定环境水样中痕量亚硝酸根的流动注射催化光度法。在室温下,当溴酸钾浓度为0.15mol/L、亮绿溶液浓度为1.12×10-3mol/L时,该方法的线性范围为0.04～0.36mg/L,检出限为7.44×10-4mg/L,测定频率为60次/h,相对标准偏差为1.1%(n=11)。     

流化催化裂化烟气脱硫助剂的制备及其脱硫活性

采用溶胶-凝胶法制备锌铝助剂,该助剂于700℃焙烧后与流化催化裂化（FCC）催化剂进行机械混合,制得混合催化剂;在FCC烟气工业模拟装置上考察混合催化剂的脱硫活性,用混合催化剂的脱硫活性来反映锌铝助剂的脱硫性能。实验结果表明,氧化锌质量分数为10％的锌铝助剂的脱硫活性最佳,脱硫率达62．5％。采用红外光谱和X射线衍射（XRD）对锌铝助剂的脱硫机理进行了研究,红外分析结果表明,弱的L酸中心有利于锌铝助剂脱硫,XRD分析结果表明,锌铝助剂在锌铝尖晶石结构尚未完全形成时,存在较多的晶格缺陷,能够有效地吸附烟气中的SOx,将其转化为H2S。     

富拉尔基区城市垃圾产业化、无害化处理途径的思考

城市垃圾污染问题不容忽视,危害巨大,加强城市垃圾分类,如何进行资源化、产业化、无害化处理是一项利国利民的大事。     

城市污水处理中活性污泥法污泥膨胀原因及控制

介绍传统活性污泥中常见的污泥膨胀现象及起因,确定丝状菌活性在污泥膨胀中所起的作用,并给出了相应的预防和控制措施。     

基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

遥感技术在水生态环境管理的应用与前景

随着遥感数据源的不断丰富,遥感技术不断提高,可以解决越来越多的水环境问题。指出了当前水生态环境管理方面的主要需求,结合目前遥感技术的发展,对国内外的水环境遥感研究进展进行综述。以湖泊富营养化监测与评估、核电站温排水遥感监测及城市黑臭水体遥感监测为案例,具体阐述遥感在水环境管理中的应用方法及成效。未来水生态环境管理发展趋势将以水污染防治为主向水污染防治和水生态修复与保护并重发展。基于此趋势,提出遥感在水生态修复的应用潜力,利于更多地方部门积极有效应用遥感技术,解决水生态环境问题。     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.