Differences in the Spatial Distribution and Chemical Composition of PM10 Between the UK and Poland

The Fine Resolution Atmospheric Multi-pollutant Exchange Model was used to calculate the spatial distribution and chemical composition of PM₁₀ concentrations for two geographically remote countries in Europe—the UK and Poland—for the year 2007. These countries are diverse in terms of pollutant emissions as well as climate conditions. Information on the contribution of natural and anthropogenic as well as national and imported particles in total PM₁₀ concentrations in both countries is presented. The paper shows that the modelled national annual average PM₁₀ concentrations, calculated for the entire country area, are similar for the UK and Poland and close to 12 μg m^?3. Secondary inorganic aerosols dominate the total PM₁₀ concentrations in Poland. Primary particulate matter has the greatest contribution to total PM₁₀ in the UK, with large contribution of base cations. Anthropogenic sources predominate (81 %) in total PM₁₀ concentrations in Poland, whereas natural prevail in the UK—hence, the future reduction of PM₁₀ air concentrations by emissions reduction could be more difficult in the UK than in Poland.     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

Application of preparative capillary gas chromatography (pcGC), automated structure generation and mutagenicity prediction to improve effect-directed analysis of genotoxicants in a contaminated groundwater

Background, aim and scope  

The importance of groundwater for human life cannot be overemphasised. Besides fulfilling essential ecological functions, it is a major source of drinking water. However, in the industrial area of Bitterfeld, it is contaminated with a multitude of harmful chemicals, including genotoxicants. Therefore, recently developed methodologies including preparative capillary gas chromatography (pcGC), MOLGEN-MS structure generation and mutagenicity prediction were applied within effect-directed analysis (EDA) to reduce sample complexity and to identify candidate mutagens in the samples. A major focus was put on the added value of these tools compared to conventional EDA combining reversed-phase liquid chromatography (RP-LC) followed by GC/MS analysis and MS library search.     

REAL-TIME SNOW SIMULATION MODEL FOR THE MONONGAHELA RIVER BASIN1

ABSTRACT: The Pittsburgh District, U.S. Army Corps of Engineers, is responsible for operating two multipurpose reservoirs in the 7384 square mile (19198 square kilometer) Monongahela Basin. A third reservoir, presently under construction, will soon be operating. The real-time forecasting of runoff for operational purposes requires simulation of snow accumulation and snowmelt throughout the Basin during the winter season. This article describes capabilities of SNOSIM, a model being developed for performing such simulation. The application of this model as part of a comprehensive system of water control software, and some initial simulation results are presented.     

EFFECTS OF INITIAL ABSTRACTION AND URBANIZATION ON ESTIMATED RUNOFF USING CN TECHNOLOGY1

ABSTRACT: Few studies have been conducted to explore the effects of initial abstraction on estimated direct runoff despite the widespread use of the curve number (CN) method in many hydrologic models to estimate direct runoff. In this study, use of a 5 percent ratio of initial abstraction (I_a) to storage (S) to estimate daily direct runoff with modified CN values for a 5 percent I_a/S value was investigated using the Long‐Term Hydrologic Impact Assessment (L‐THIA) geographic information system (GIS). In addition, the effects on estimated runoff of altering the hydrologic soil group due to urbanization were investigated. The L‐THIA model was applied to the Indiana Little Eagle Creek watershed with 5 percent and 20 percent I_a/S values, considering hydrologic soil group alteration due to urbanization. The results indicate that uses of a 5 percent l_a/S and modified CN values and Hydrologic Soil Group D for urbanized areas in model runs can improve long term direct runoff prediction.     

A MATHEMATICAL MODEL FOR OPTIMUM DESIGN AND CONTROL OF METROPOLITAN WASTEWATER MANAGEMENT SYSTEMS1

ABSTRACT: A comprehensive mathematical model (Urban Wastewater Management Model) has been developed to continuously simulate time-varying wastewater flows and qualities in complex metropolitan combined sewerage systems. The model serves three functions: (1) assessment of existing or planned system performance in relation to other wastewater discharges in either a metropolitan or river basin area; (2) determination of the optium operation or automatic control of existing or planned systems during rainstorms; and (3) determination of the most economically feasible combination of design alternatives for improving or expanding existing systems to meet specified performance criteria. The model provides an efficient engineering tool for evaluating and controlling pollutant discharges from combined sewerage systems (including treatment plants) to receiving waters, while considering the time and spacial variations of rainfall and dry-weather flows and qualities as well as economic constraints.     

Photochemistry and photoinduced toxicity of acifluorfen, a diphenyl-ether herbicide

Photochemistry studies can be helpful in assessing the environmental fate of chemicals. Photochemical reactions lead to the formation of by-products that can exhibit different toxicological properties from the original compound. For this reason the photochemical behavior of the herbicide acifluorfen (5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoic acid) in the presence of different solvents was studied. Photochemical reactions were carried out using a high-pressure mercury arc and a solar simulator. Kinetic parameters and quantum yields were determined. The identification of photoproducts was performed by mass spectrometry and [1H] nuclear magnetic resonance (NMR). Nitrofluorfen, hydroxy-nitrofluorfen, 2-chloro-4-(trifluoromethyl)phenol, 5-trifluoromethyl-5'-nitrodibenzofuran, and other derivatives were identified. The photochemical reactions were also carried out in the presence of either a singlet or a triplet quencher, and in the presence of either a radical initiator or a radical inhibitor. Substances used as inhibitors of the excited levels T1 and S1 showed that photodegradation of acifluorfen begins from a singlet state S1 through a pi,pi* transition. The role of free radicals in the photodegradation of acifluorfen was determined and a radical mechanism was proposed. Toxicity tests against Daphnia magna Strauss showed that acifluorfen was not toxic at a concentration of 0.1 mM; however, photoproducts formed after 36 h of UV exposure of the herbicide induced a remarkable toxicity to the test organism.     

Effects of 17alpha-ethinylestradiol on the reproduction of the cladoceran species Ceriodaphnia reticulata and Sida crystallina

Single-species tests allow the assessment of chronical effects of endocrine disruptors on organisms under laboratory conditions. In the current study, three-generation tests with Ceriodaphnia reticulata and Sida crystallina were carried out to examine the influence of the synthetic hormone 17alpha-ethinylestradiol (EE) on the reproduction of these cladoceran species. For each species, six different concentrations (10-500 microg/l EE) and two controls were tested with eight replicates for a duration of 4 weeks. The test was initiated by transferring one neonate individual into a test vessel which was incubated under standardized conditions. Every 2 days, the medium was renewed and life history parameters such as survivorship of the adults and juveniles, clutch size, first appearance and number of produced offspring were investigated. Acute toxicity tests showed that C. reticulata (EC50 (24 h) 1814 microg/l) was more sensitive towards the substance compared to S. crystallina (EC50 (24 h) >4100 microg/l). The juvenile phase of S. crystallina was significantly shorter at concentrations above 100 microg/l EE. For C. reticulata, 17alpha-ethinylestradiol caused a higher mortality of the newly hatched juveniles at EE concentrations above 200 microg/l. No effects were found for mortality of adult animals, birth rate, number of juveniles per female and net reproduction rate of S. crystallina and C. reticulata. Thus, sublethal effects on parental generation exposed to EE lead to disturbances in reproduction and to affection of their offspring. Negative consequences for the population dynamic cannot be excluded, e.g. the decrease of a population.