Reduction and avoidance of lubricant mist demands an integrated assessment approach

A case study to identify major factors for lubricant mist exposure covered 15 metal machining sites. The investigation included milling, turning, drilling and grinding applications. Systematic analysis considered all relevant data concerning the machine tool, the lubricant and the suction plant. The efficiency of the implemented maintenance program at the installed filter systems was checked by concentration measurements immediately before and after service. All performed measurements of lubricant aerosol and vapor loads upstream and downstream of the installed filter systems were carried out according to VDI 2066 and BIA 3110, respectively. The selection criteria for the sites to be investigated, the systematic nature of the data acquisition and the procedure of the analysis are demonstrated in detail by performing comparisons between selected applications using emulsions and those employing straight oil for lubrication. The results of the study identify recirculation of ventilated air as the major source of workplace exposure to airborne lubricant emissions. More than 60% of the demisters investigated emit air at total lubricant loads (aerosols and vapor) above the limit of 20 mg m-3 at any time of operation; which also means immediately after service. A common reason for exceeded aerosol loads in recirculated air is e.g. the fact that the type of filter system applied is often not suitable for the separation problem. Loads of lubricant vapor are usually higher at the processes which use water emulsions as lubricant. In a quarter of the cases the limits were exceeded solely due to high vapor loads even immediately after service. The exposure can be reduced by replacing the lubricant, installation of a vapor separation plant or avoiding air recirculation. Maintenance time of the demisting system and aerosol separation efficiency of state-of-the-art demisting systems can be expanded by implementation of enhanced preliminary filter stages. This study confirms that appropriate service measures lower both aerosol emissions and lubricant vapor concentrations due to the reduction of exposed oil-wetted surfaces. The performed measurements show no significant relationship between loads of airborne lubricants and the type of machining process. Therefore, investigations at a much more detailed level have to be performed. However, the individual assessment of any workplace due to the complex situation remains essential.     

First trimester prenatal diagnosis of haemophilia A: Two years' experience

We evaluated the feasibility, reliability, and acceptability of prenatal diagnosis of haemophilia A by DNA analysis of chorionic villi. Twenty-two women at risk to transmit the abnormal gene were referred for prenatal diagnosis, two of them twice. Two of the 22 women appeared to be non-carriers by DNA analysis. In one of these women, the results were known only after chorionic villus sampling had been carried out. Thirteen of the twenty carriers were heterozygous for an intragenic (Bell or Xbal) marker; six women were only heterozygous for the extragenic DXS52 (Stl4) locus. One of the women was homozygous for all the presently known DNA markers within or closely linked with the factor VIII locus. Twelve of the 22 fetuses at risk were male, ten were female. Seven of the 12 male fetuses were shown to be affected and were subsequently aborted. Four male fetuses appeared to be not affected. In one case, the diagnosis was made by use of an extragenic marker. The woman rejected fetal blood sampling to confirm the diagnosis. After birth, a normal factor VIII level was found in three of the four cases. The fourth pregnancy is still continuing. In one of the 12 male fetuses, no diagnosis at the gene level was possible. DNA analysis is expected to provide maximum certainty as to the phenotype of the fetus for approximately 60 per cent of the women; for another 37 per cent a rate of misdiagnosis of 4–5 per cent applies. In only 3 per cent of the cases will no diagnosis at the gene level be possible as yet. The new possibility of a prenatal diagnosis in the first trimester of pregnancy enabled some of these women to have a family of their own and was appreciated in particular by the women who underwent fetoscopy in an earlier pregnancy.     

Solution by dilution?—A review on the pollution status of the Yangtze River

The Yangtze River has been a source of life and prosperity for the Chinese people for centuries and is a habitat for a remarkable variety of aquatic species. But the river suffers from huge amounts of urban sewage, agricultural effluents, and industrial wastewater as well as ship navigation wastes along its course. With respect to the vast amounts of water and sediments discharged by the Yangtze River, it is reasonable to ask whether the pollution problem may be solved by simple dilution. This article reviews the past two decades of published research on organic pollutants in the Yangtze River and several adjacent water bodies connected to the main stream, according to a holistic approach. Organic pollutant levels and potential effects of water and sediments on wildlife and humans, measured in vitro, in vivo, and in situ, were critically reviewed. The contamination with organic pollutants, including polycyclic aromatic hydrocarbons, polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans, polybrominated diphenyl ethers (PBDEs), perfluorinated compounds (PFCs), and others, of water and sediment along the river was described. Especially Wuhan section and the Yangtze Estuary exhibited stronger pollution than other sections. Bioassays, displaying predominantly the endpoints mutagenicity and endocrine disruption, applied at sediments, drinking water, and surface water indicated a potential health risk in several areas. Aquatic organisms exhibited detectable concentrations of toxic compounds like PCBs, OCPs, PBDEs, and PFCs. Genotoxic effects could also be assessed in situ in fish. To summarize, it can be stated that dilution reduces the ecotoxicological risk in the Yangtze River, but does not eliminate it. Keeping in mind an approximately 14 times greater water discharge compared to the major European river Rhine, the absolute pollution mass transfer of the Yangtze River is of severe concern for the environmental quality of its estuary and the East China Sea. Based on the review, further research needs have been identified.     

Dealing with disjunct concentration measurements in eddy covariance applications: A comparison of available approaches

Using proton transfer reaction mass spectrometry equipped with a quadrupol mass analyser to quantify the biosphere-atmosphere exchange of volatile organic compounds (VOC), concentrations of different VOC are measured sequentially. Depending on how many VOC species are targeted and their respective integration times, each VOC is measured at repeat rates on the order of a few seconds. This represents an order of magnitude longer sample interval compared to the standard eddy covariance (EC) method (5–20 Hz sampling rates). Here we simulate the effect of disjunct sampling on EC flux estimates by decreasing the time resolution of CO₂ and H₂O concentrations measured at 20 Hz above a temperate mountain grassland in the Austrian Alps. Fluxes for one month are calculated with the standard EC method and compared to fluxes calculated based on the disjunct data (1, 3 and 5 s sampling rates) using the following approaches: i) imputation of missing concentrations based on the nearest neighbouring samples (iDEC_nn), ii) imputation by linear interpolation (iDEC_li), and iii) virtual disjunct EC (vDEC), i.e. flux calculation based solely on the disjunct concentrations. It is shown that the two imputation methods result in additional low-pass filtering, longer lag times (as determined with the maximum cross-correlation method) and a flux loss of 3–30% as compared to the standard EC method. A novel procedure, based on a transfer function approach, which specifically corrects for the effect of data treatment, was developed, resulting in improved correspondence (to within 2%). The vDEC method yields fluxes which approximate the true (20 Hz) fluxes to within 3–7% and it is this approach we recommend because it involves no additional empirical corrections. The only drawback of the vDEC method is the noisy nature of the cross-correlations, which poses problems with lag determination – practical approaches to overcome this limitation are discussed.     

Organophosphorus flame retardants and plasticizers in the atmosphere of the North Sea

Air samples collected in the German part of the North Sea from March to July 2010 were investigated for organophosphorus compounds (OPs) being applied as flame retardants and plasticizers. The ∑₈OPs concentration ranged from 110 to 1400 pg m⁻³ while tris(2-chloroisopropyl) phosphate (TCPP) dominated all samples with individual concentrations up to 1200 pg m⁻³. The highest concentrations were observed in continental air masses showing the high influence of industrialized regions including production sites on atmospheric emissions and concentrations. The occurrence of OPs even in oceanic/Arctic air masses shows that OPs can undergo long-range atmospheric transport. Dry particle-bound deposition fluxes from 9 to 240 ng m⁻² d⁻¹ for ∑₈OPs were estimated leading to a minimum annual flux of 710 ± 580 kg y⁻¹ OPs into the German North Sea. This study presents the first occurrence of OPs in the marine atmosphere together with important information on their long-range transport potential.     

Substance Flow Analyses of Organic Pollutants in Stockholm

This paper summarizes substance flow analyses for four organic substances in the City of Stockholm, Sweden: diethylhexyl phthalate (DEHP), alkylphenolethoxylates (APEO), polybrominated diphenylethers (PBDE) and chlorinated paraffins (CP). The results indicate that the stocks of APEO, PBDE and CP all are approximately 200–250 tonnes, whereas the DEHP stock is two orders of magnitude larger. Emissions can be linked to imported consumer goods such as electronics (PBDE) and textiles (APEO), and to construction materials (DEHP, CP). For several of the substances considerable amounts remain in the technosphere for a long time, even after use of the substance in new products has been eliminated. For example, the use of DEHP as plasticizer for PVC plastics in cables and floorings has more or less been phased-out, but still these applications make up a stock of some 20,000 tonnes (85% of the total DEHP stock in Stockholm) and emit 28 tonnes of DEHP annually (93% of overall emissions). Likewise, the use of chlorinated paraffins in sealants has been radically reduced, but there are 170 tonnes of CP in sealants in Stockholm making up 75% of the stock, and causing half of the emissions to water and air. These emissions are likely to continue for decades, and the stocks therefore have to be considered when analysing and managing the impact of urban substance flows on the environment.     

Kriterien für eine ökologisch nachhaltige Stoff-und Gentechnikpolitik

Based on the precautionary principles and the functional model of the environment, the meaning of the criterion of sustainability is explained and applied on organic chemicals and genetically modified organisms (GMOs). It is shown that the criterion permits the sustainability of an operationalization of the precautionary principle as interpreted strictly and the ecological component records the sustainability for the respective areas of environmental problems. Using examples from the field of chemistry, it has been demonstrated that problems have arisen through the substituted substances which are recognized as being ecologically harmful, since the sustainability was not applied as the central criterion for the environmental evaluation of organic materials. The conventions on ‘Persistent Organic Pollutants’ (POPs) which have been agreed upon provide a chance to revive the research on the sustainability of organic chemicals. Similar findings are seen for the GMOs, whose ecosystemic risks should not merely be defined based upon their human toxicological and already recognized ecological aspects.