Spermatozeugmen und Paarungsverhalten bei Tripedalia cystophora (Cubomedusae)

New observations on the complete life cycle of Tripedalia cystophora Conant have revealed that—because of the radialsymmetrically constructed body of the polyp and its complete metamorphosis into one medusa—the “Cubozoa” are unique in their development, systematics and evolution. the same is true for the sexual biology of their medusae. It has long been known that the female T. cystophora are larviparous; fertilized eggs develop within the gastral pockets into free-swimming planulae. How do spermatozoa approach the eggs inside the female? In laboratory cultures, young medusae could be raised to maturity. Rearing experiments and observations yielded surprising results, revealing a situation which is new for Cnidaria. In T. cystophora, ripe medusae of both sexes can be identified easily by the different colour and structure of the gonads. In the gonads of the ripe male, numerous spermatozoa are joined to form spermatozeugmata of a simple type. Numerous spermatozeugmata form big globular bodies (spermatophores), which develop in small grooves on the inside surface of the stomach. The spermatophores are transferred directly from the male to the female during successive steps of special mating behaviour. The observations confirm that Cubomedusae have reached the peak of medusan specialization.     

Nachweis der an Hausstaub gebundenen Innenraumbelastungen mit dem Leuchtbakterientest

The determination and assessment of mixtures of different and complex indoor pollutants is difficult. This investigation was performed in order to determine the effects of pollutants closely bound to household-dust. The approach ist not the determination of single compounds but of all pollutants (sum parameter). For this reason a new method was developed with which househould dust samples are introduced in the Microtox®-Text System to quantify the effect of pollutants. Some of the methods tested revealed good results, however, further research and investigations on the basis of the data already obtained are necessary.     

Seasonal ozone response of mature beech trees (Fagus sylvatica) at high altitude in the Bavarian forest (Germany) in comparison with young beech grown in the field and in phytotrons

Mature beech trees (Fagus sylvatica) grown at two different altitudes in the Bavarian forest were compared with young beech trees grown at nearby field sites or in phytotrons for their macroscopic and physiological responses to different ozone (O(3)) exposures. Cumulative O(3) exposure expressed as the sum of hourly mean concentrations above the canopy ranged between 100 and 150 microl l(-1) h, with the vertical O(3) profiles at the higher altitude site being enhanced by 30%. O(3) profiles at all sites were reduced by up to 20% with increasing depth within and beneath the canopy. The leaf discoloration that developed in the absence of premature leaf loss was similar in the sun foliage of mature and young trees (including plant grown in the phytotron). Injury became apparent at low O(3) exposures, expressed as accumulated hourly means over a threshold of 40 nl l(-1) (AOT40 <3.5 microl l(-1) h) at the lower site in both the mature trees and the young beech at the field site, but only occurred when AOT40 values reached 7 microl l(-1) h at the upper site, and 6 microl l(-1) h in the phytotrons. However, the association between injury and O(3) exposure was improved when cumulative ozone uptake to sun leaves was the ozone index, used with values of about 3 mmol m(-2) resulting in visible injury in both mature and young beech growing in phytotrons. Under high ozone exposure levels of inositol were lowered, whilst concentrations of lignin-like materials were enhanced in mature beech. Similar responses were observed in young beech grown in phytotrons. As the sun foliage was affected by only a small and variable extent each year, the seasonal O(3) impact at high altitude did not appear to pose an acute risk to mature beech trees.     

Toxicity testing of highly volatile chemicals with green algae

A gas-tight system for toxicity testing of highly volatile chemicals with the green algaChlamydomonas reinhardtii was developed. The procedure permits maintenance of constant and defined concentrations of the tested compounds in the vessels. To ensure sufficient CO₂-supply, new bipartite test vessels were used. These vessels allowed spatial separation of a HCO₃-/CO ₃ ^2? buffer used for CO₂ supply and the alga culture to avoid growth inhibition due to ionic strength. Several volatile chlorinated hydrocarbons have been tested. Their EC10 values were several orders of magnitude lower than those obtained with open test systems.     

Mesoscale ecohydrological modelling to analyse regional effects of climate change

Hydrological processes and crop growth were simulated for the state of Brandenburg (Germany) using the hydrological/vegetation/water quality model SWIM, which can be applied for mesoscale river basins or regions. Hydrological validation was carried out for three mesoscale river basins in the area. The crop growth module was validated regionally for winter wheat, winter barley and maize. After that the analysis of climate change impacts on hydrology and crop growth was performed, using a transient 1.5 K scenario of climate change for Brandenburg and restricting the crop spectrum to the three above mentioned crops. According to the scenario, precipitation is expected to increase. The impact study was done comparing simulation results for two scenario periods 2022–2030 and 2042–2050 with those for a reference period 1981–1992. The atmospheric CO₂ concentrations for the reference period and two scenario periods were set to 346, 406 and 436 ppm, respectively. Two different methods – an empirical one and a semi-mechanistic one – were used for adjustment of net photosynthesis to altered CO₂. With warming, the model simulates an increase of evapotranspiration (+9.5%, +15.4%) and runoff (+7.0%, +17.2%). The crop yield was only slightly altered under the climate change only scenario (no CO₂ fertilization effect) for barley and maize, and it was reduced for wheat (–6.2%, –10.3%). The impact of higher atmospheric CO₂ compensated for climate-related wheat yield losses, and resulted in an increased yield both for barley and maize compared to the reference scenario. The simulated combined effect of climate change and elevated CO₂ on crop yield was about 7% higher for the C₃ crops when the CO₂ and temperature interaction was ignored. The assumption that stomatal control of transpiration is taking place at the regional scale led to further increase in crop yield, which was larger for maize than for wheat and barley. The regional water balance was practically not affected by the partial stimulation of net photosynthesis due to higher CO₂, while the introduction of stomatal control of regional transpiration reduced evapotranspiration and enlarged notably runoff and ground water recharge.     

Field intercomparison of diffusive samplers for measuring ammonia

Agricultural production systems are recognised as a major source of atmospheric ammonia. Deposition of ammonia and ammonium may contribute to undesired changes in oligotrophic ecosystems. The continuous measurement of atmospheric ammonia requires expensive and sophisticated techniques and is performed only in a very restrict number of ambient air stations in Europe. Therefore, the application of passive samplers, which have the advantage of being easy to handle and cost-efficient, is useful. In the past the comparability of different passive samplers must be considered as rather scarce. In a joint European project under the leadership of the GSF-Forschungszentrum für Umwelt und Gesundheit, Neuherberg, in 1997 a comparison of different passive ammonia monitoring methods was carried out in a prealpine rural site near Garmisch-Partenkirchen. It was considered valuable to include not only well established systems but also methods still being developed. For the comparative test ten working groups with different methods took part. A wet annular denuder system, which has been developed by the Netherlands Energy Research Foundation for on-line measurement of atmospheric ammonia, served as reference of passive methods. The experiment, which started in June and finished in December, showed that most of the passive samplers fulfil the requirements and can be recommended for further measurements. Additional measurements of meteorological parameters were performed to check the influences of different weather conditions on passive sampling.     

Ozone air pollution and foliar injury development on native plants of Switzerland

The objectives of this study were to examine the foliar sensitivity to ozone exposure of 12 tree, shrub, and herbaceous species native to southern Switzerland and determine the seasonal cumulative ozone exposures required to induce visible foliar injury. The study was conducted from the beginning of May through the end of August during 2000 and 2001 using an open-top chamber research facility located within the Lattecaldo Cantonal Forest Nursery in Canton Ticino, southern Switzerland (600 m asl). Plants were examined daily and dates of initial foliar injury were recorded in order to determine the cumulative AOT40 ppb h ozone exposure required to cause visible foliar injury. Plant responses to ozone varied significantly among species; 11 species exhibited visible symptoms typical of exposures to ambient ozone. The symptomatic species (from most to least sensitive) were Populus nigra, Viburnum lantana, Salix alba, Crataegus monogyna, Viburnum opulus, Tilia platyphyllos, Cornus alba, Prunus avium, Fraxinus excelsior, Ribes alpinum, and Tilia cordata; Clematis spp. did not show foliar symptoms. Of the 11 symptomatic species, five showed initial injury below the critical level AOT40 10 ppmh O3 in the 2001 season.     

MODELKEY. Models for assessing and forecasting the impact of environmental key pollutants on freshwater and marine ecosystems and biodiversity (5 pp)

BACKGROUND: Triggered by the requirement of Water Framework Directive for a good ecological status for European river systems till 2015 and by still existing lacks in tools for cause identification of insufficient ecological status MODELKEY (http:// www.modelkey.org), an Integrated Project with 26 partners from 14 European countries, was started in 2005. MODELKEY is the acronym for 'Models for assessing and forecasting the impact of environmental key pollutants on freshwater and marine ecosystems and biodiversity'. The project is funded by the European Commission within the Sixth Framework Programme. OBJECTIVES: MODELKEY comprises a multidisciplinary approach aiming at developing interlinked tools for an enhanced understanding of cause-effect-relationships between insufficient ecological status and environmental pollution as causative factor and for the assessment and forecasting of the risks of key pollutants on fresh water and marine ecosystems at a river basin and adjacent marine environment scale. New modelling tools for risk assessment including generic exposure assessment models, mechanistic models of toxic effects in simplified food chains, integrated diagnostic effect models based on community patterns, predictive component effect models applying artificial neural networks and GIS-based analysis of integrated risk indexes will be developed and linked to a user-friendly decision support system for the prioritisation of risks, contamination sources and contaminated sites. APPROACH: Modelling will be closely interlinked with extensive laboratory and field investigations. Early warning strategies on the basis of sub-lethal effects in vitro and in vivo are provided and combined with fractionation and analytical tools for effect-directed analysis of key toxicants. Integrated assessment of exposure and effects on biofilms, invertebrate and fish communities linking chemical analysis in water, sediment and biota with in vitro, in vivo and community level effect analysis is designed to provide data and conceptual understanding for risk arising from key toxicants in aquatic ecosystems and will be used for verification of various modelling approaches. CONCLUSION AND PERSPECTIVE: The developed tools will be verified in case studies representing European key areas including Mediterranean, Western and Central European river basins. An end-user-directed decision support system will be provided for cost-effective tool selection and appropriate risk and site prioritisation.