A Wind Tunnel Study to Design Large,Open-top Chambers for Whole-tree Pollutant Exposure Experiments

A wind tunnel study was conducted to determine the optimal design features of a large, open-top chamber, as needed for pollution exposure studies on mature trees. An optimally-designed, open-top chamber must minimize the incursion of ambient air through its opening and maintain a uniform treatment concentration throughout the chamber. The design features of interest are the diameter and height of the chamber and the deflection angle and opening size of any frustum that may be mounted on top of a model chamber.

Design specifications depend on the turbulence regime about the chamber, which is influenced by the nature of the surrounding vegetation. Consequently, our investigation was performed on scale-model, open-top chambers in a wind tunnel populated with a model coniferous forest. Turbulence measurements demonstrated the similarity between the turbulence regime of the model and a natural forest. A hydrocarbon tracer was injected into the wind tunnel flow to characterize chamber performance.

The main design features of open-top chambers are the velocity of air exiting through the top and the relationship between the length scale of the turbulence and the diameter of the chamber opening. As exit velocities increase, the proportion of eddies with sufficient force to penetrate into the chamber decrease. Therefore, for equal volumetric air flows, smaller opening sizes increase the exit velocities and reduce the number and extent of ambient air incursions. Almost total exclusion of ambient air is achieved as the exit velocity of the air exceeds the magnitude of one standard deviation of the vertical wind velocity measured at the chamber top. The incursion of ambient air is also reduced when the diameter of the chamber opening is smaller than the characteristic length scale of the turbulence, a measure of mean eddy size.

Frusta deflect air flow over the chamber. Three prototypes, with 30?, 45? and 60-degree angles were tested. A 30-degree frustum slightly improves the performance of the chamber and is more effective in preventing ambient air from entraining into the chamber opening than frusta with either a 45? or 60-degree angle. A flatter frustum allows for a smoother transition in the wind velocity streamline and is less apt to cause wake turbulence, as is the case with steeper frusta.

Knowledge of the turbulence characteristics of plant canopies are readily available in the literature and can aid scientists and engineers in designing the optimal chamber and frusta dimensions for their particular application. Therefore, the empirical approach to chamber design can be avoided, and substantial savings can be realized.     

Experiences in Controlling Atmospheric Pollution Encountered in Pharmaceutical Manufacturing Processes

Smog aerosol can be related to sources, atmospheric transport, and particle growth through a Lagrangian model. Sample calculations indicate that the midday Pasadena aerosol is dominated by material produced in the atmosphere, and that the afternoon drop in aerosol mass is due to the advection of cleaner air. Numerical experiments suggest that control of primary particulate emissions without corresponding control of reactive gases would not substantially improve visibility.     

Glass Fibers and Their Use as Filter Media

Typical air quality effect levels of photochemical oxidants on specific plant substrates are illustrated. These include ambient oxidant exposure data measured as “total oxidant” as well as laboratory exposures to individual pure oxidants, ozone, or PAN compounds, since these oxidants are identified in photochemical smog. New terms, “PaNs” and “PAN-type” oxidant, have been proffered for purposes of clarification of the terminology. PAN-type oxidant more precisely defines the phytotoxicant complex causing silvering or bronzing of the lower leaf surfaces in lieu of the older term “oxidant.” Due to the recognition of several oxidizing phytotoxicants in recent years, it is recommended that the term oxidant be reserved for use as a generic term. A tabular classification of the oxidizing phytotoxicants found in community photochemical smog and the specific syndromes produced is provided.     

Part I: lead peroxide candles and dustfall collectors

A diffusion flame burner was operated to determine the effect of several parameters on the quantity of NO_x and unburned hydrocarbons produced. The statistical analysis indicated the unburned hydrocarbon emissions to be dependent upon the rate of heat release in the system, the amount of excess combustion air, the fuel molecular structure, and the interaction between the fuel structure and the amount of excess air. Analysis of the NO_x emissions, after an adjustment to a common temperature to eliminate the temperature effect, showed them to be dependent upon the fuel molecular structure and the amount of excess air. The NO_x emissions reached a maximum at the conditions which yielded minimum unburned hydrocarbon emissions. Multiple regressions were made which yielded predicting equations for both the unburned hydrocarbon and the NO_x for the apparatus used.     

Comparative sorption,desorption and leaching potential of aminocyclopyrachlor and picloram

Sorption and desorption of aminocyclopyrachlor (6-amino-5-chloro-2-cyclopropylpyrimidine-4-carboxylic acid) were compared to that of the structurally similar herbicide picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid) in three soils of differing origin and composition to determine if picloram data is representative of aminocyclopyrachlor behavior in soil. Aminocyclopyrachlor and picloram batch sorption data fit the Freundlich equation and was independent of concentration for aminocyclopyrachlor (1/n = 1), but not for picloram (1/n = 0.80–0.90). Freundlich sorption coefficients (K _f) for aminocyclopyrachlor were lowest in the eroded and depositional Minnesota soils (0.04 and 0.12 μmol ^(1–1/n) L^1/n kg^?1) and the highest in Molokai soil (0.31 μmol ^(1–1/n) L^1/n kg^?1). For picloram, K _f was lower in the eroded (0.28 μmol ^(1–1/n) L^1/n kg^?1) as compared to the depositional Minnesota soil (0.75 μmol ^(1–1/n) L^1/n kg^?1). Comparing soil to soil, K _f for picloram was consistently higher than those found for aminocyclopyrachlor. Desorption of aminocyclopyrachlor and picloram was hysteretic on all three soils. With regard to the theoretical leaching potential based on groundwater ubiquity score (GUS), leaching potential of both herbicides was considered to be similar. Aminocyclopyrachlor would be ranked as leacher in all three soils if t_1/2 was > 12.7 days. To be ranked as non-leacher in all three soils, aminocyclopyrachlor t_1/2 would have to be <3.3 days. Calculated half-life that would rank picloram as leacher was calculated to be ～15.6 d. Using the current information for aminocycloprachlor, or using picloram data as representative of aminocycloprachlor behavior, scientists can now more accurately predict the potential for offsite transport of aminocycloprachlor.     

A Preliminary Look at Source-Receptor Relationships in the Texas-Mexico Border Area

ABSTRACT

Several factors have recently caused visibility impairment at Big Bend National Park, TX, to be of interest. Analyses of historical data collected there have shown that visibility is poorer and fine particle concentrations are higher at Big Bend than at other monitored Class I areas in the western United States. In addition, air masses frequently arrive there after crossing Mexico, where emissions are not well known. During September and October 1996, a field study was undertaken to begin examining the aerosol, visibility, and meteorology on both sides of the border. Results indicate that, during the study, the largest fractions of fine mass and light extinction at Big Bend were due to sulfates and the trace elements most closely associated with sulfate particles were Na and Se. Based on back trajectory modeling and the spatial, temporal, and inter-species relationships in the fine particle concentrations measured during the study, sulfates arrived at the park from both Mexico and the United States. Se was higher in Texas than in Northern Mexico, while V, Pb, Zn, Ni, and Mn were on average much higher in Mexico.     

Light Scattering Characteristics of Aerosols at Ambient and as a Function of Relative Humidity: Part II—A Comparison of Measured Scattering and Aerosol Concentrations Using Statistical Models

ABSTRACT

The eastern United States national parks experience some of the worst visibility conditions in the nation. To study these conditions, the Southeastern Aerosol and Visibility Study (SEAVS) was undertaken to characterize the size-dependent composition, thermodynamic properties, and optical characteristics of the ambient atmospheric particles. It is a cooperative three-year study that is sponsored by the National Park Service and the Electric Power Research Institute and its member utilities. The field portion of the study was carried out from July 15 to August 25, 1995.

The study design, instrumental configuration, and estimation of aerosol types from particle measurements is presented in a companion paper. In the companion paper, we compare measurements of scattering at ambient conditions and as functions of relative humidity to theoretical predictions of scattering. In this paper, we make similar comparisons, but using statistical techniques. Statistically derived specific scattering associated with sulfates suggest that a reasonable estimate of sulfate scattering can be arrived at by assuming nominal dry specific scattering and treating the aerosols as an external mixture with ammoniation of sulfate accounted for and by the use of Tang's growth curves to predict water absorption. However, the regressions suggest that the sulfate scattering may be underestimated by about 10%. Regression coefficients on organics, to within the statistical uncertainty of the model, suggest that a reasonable estimate of organic scattering is about 4.0 m²/g.

A new analysis technique is presented, which does not rely on comparing measured to model estimates of scattering to evoke an understanding of ambient aerosol growth properties, but rather relies on measurements of scattering as a function of relative humidity to develop actual estimates of f(RH) curves. The estimates of the study average f(RH) curve for sulfates compares favorably with the theoretical f(RH) curve for ammonium bisulfate, which is in turn consistent with the study average sulfate am-moniation corresponding to a molar ratio of NH₄/SO₄ of approximately one. The f(RH) curve for organics is not significantly different from one, suggesting that organics are weakly to nonhygroscopic.     

Light Scattering Characteristics of Aerosols as a Function of Relative Humidity: Part I—A Comparison of Measured Scattering and Aerosol Concentrations Using the Theoretical Models

ABSTRACT

The Southeastern Aerosol and Visibility Study (SEAVS) was undertaken to characterize the size-dependent composition, thermodynamic properties, and optical characteristics of the ambient atmospheric particles in the southeastern United States. The field portion of the study was carried out from July 15 to August 25, 1995.

As part of the study a relative humidity controlled inlet was built to raise or lower the relative humidity to predetermined levels before the aerosol was passed into an integrating nephelometer or particle-sizing device. Five other integrating nephelometers were operated in various configurations, two of which were fitted with a 2.5 μm inlet. Fine particle (<2.5 μm) samplers were operated to measure concentrations of sulfate, nitrate, and ammonium ions, organic and elemental carbon, and fine soil. Mass size distributions were measured with an eight-stage, single orifice cascade impactor.     

Interpretation of Trends of PM25 and Reconstructed Visibility from the IMPROVE Network

ABSTRACT

Under the IMPROVE visibility monitoring network, federal land managers have monitored visibility and fine particle concentrations at 29 Class I area sites (mostly national parks and wilderness areas) and Washington, DC since 1988. This paper evaluates trends in reconstructed visibility and fine particles for the 10th (best visibility days), 50th (average visibility days), and 90th (worst visibility days) percentiles over the nine-year period from 1988-96. Data from these sites provides an indication of regional trends in air quality and visibility resulting from implementation of various emission reduction strategies.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a “plausible link” between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.

Policy-makers have recognized that regulations must be based on good science and that a number of issues still remain. These issues can generally be grouped into four main categories: emissions inventory, control technology, fate of releases, and health effects. This paper will discuss recent, ongoing, and planned studies to address the remaining issues regarding the presence of mercury in the environment, with an emphasis on those studies that are directly related to the DOE/Federal Energy Technology Center’s (FETC) programmatic effort.