Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.     

Focusing biodiversity research on the needs of decision makers

The project on Biodiversity Uncertainties and Research Needs (BURN) ensures the advancement of usable knowledge on biodiversity by obtaining input from decision makers on their priority information needs about biodiversity and then using this input to engage leading scientists in designing policy-relevant research. Decision makers articulated concerns related to four issues: significance of biodiversity; status and trends of biodiversity; management for biodiversity; and the linkage of social, cultural, economic, legal, and biological objectives. Leading natural and social scientists then identified the research required to address the decision makers' needs and determined the probability of success. The diverse group of experts reached consensus on several fundamental issues, helping to clarify the role of biodiversity in land and resource management. The BURN participants identified several features that should be incorporated into policy-relevant research plans and management strategies for biodiversity. Research and assessment efforts should be: multidisciplinary and integrative, participatory with stakeholder involvement, hierarchical (multiple scales), and problem- and region-specific. The activities should be focused regionally within a global perspective. Meta-analysis of existing data is needed on all fronts to assess the state of the science. More specifically, the scientists recommended six priority research areas that should be pursued to address the information needs articulated by decision makers: (1) characterization of biodiversity, (2) environmental valuation, (3) management for sustainability—for humans and the environment (adaptive management), (4) information management strategies, (5) governance and stewardship issues, and (6) communication and outreach. Broad recommendations were developed for each research area to provide direction for research planning and resource management strategies. The results will directly benefit those groups that require biodiversity research to address their needs—whether to develop policy, manage natural resources, or make other decisions affecting biodiversity.     

Angler survey contributes to socially acceptable modification of harvest regulations to preserve cutthroat trout fishery in Snake River,Wyoming, USA

This is a case study that describes a survey of anglers that was used to assist in modifying fishing regulations for indigenous trout in the Snake River, Wyoming. A mail survey of anglers who purchased 1991 Wyoming fishing licenses in the two counties adjacent to the Snake River was conducted during fall 1992. Differences in angler preferences were noted between anglers who purchased licenses in two adjacent counties with different socioeconomic structures, as well as between residents and nonresidents in each county. Anglers who purchased licenses in Teton County, where there is extensive tourism and immigration by relatively wealthy residents, tended to be more specialized and less harvest oriented. Anglers in Lincoln County, which is largely agricultural and has substantially less tourism and immigration of residents, tended to fish in many different ways and indicated more desire to harvest fish. Anglers from the two counties segregated themselves; those from Teton County primarily used the upstream portion of the study reach, and those from Lincoln County primarily used a short downstream portion of the reach. Modification of fishing regulations to reduce harvest of spawning-size cutthroat trout in the Snake River probably was acceptable to most anglers due to spatial segregation and their attitudes toward harvest.The unit is jointly supported by the University of Wyoming, the Wyoming Game and Fish Department, and the National Biological Survey.     

HEAVY RAINFALL DISTRIBUTIONS BY SEASON IN LOUISIANA: SYNOPTIC INTERPRETATIONS AND QUANTILE ESTIMATES1

ABSTRACT: In most studies, quantile estimates of extreme 24-hour rainfall are given in annual probabilities. The probability of experiencing an excessive storm event, however, differs throughout the year. As a result, this paper explored the differences between heavy rainfall distributions by season in Louisiana. It was concluded by using the Kruskal-Wallis and Mann-Whitney tests that the distribution of heavy rainfall events differs significantly between particular seasons at the sites near the Gulf Coast. Furthermore, seasonal frequency curves varied dramatically at the four sites examined. Mixed distributions within these data were not found to be problematic, but the mechanisms that produced the events were found to change seasonally. Extreme heavy rainfall events in winter and spring were primarily generated by frontal weather systems, while summer and fall events had high proportions of events produced by tropical disturbances and airmass (free-convective) conditions.     

MODELING THE BUILDUP AND WASHOFF OF POLLUTANTS ON URBAN WATERSHEDS1

ABSTRACT: A model for urban stormwater quality was developed in this study. The basis for the model is the process by which pollutants build up on the watershed surface. For the wet climate of the study site, it was assumed that there exists an interval of time over which the pollutant buildup equals the pollutant washoff (no accumulation of pollutant). The buildup model was represented by a linear function of the antecedent dry time. The buildup function was then linked with a pollutant washoff model represented by a power function of the storm runoff volume. Various time intervals for no net accumulation were tested to calibrate the model. The model was calibrated to observed data for two small urban basins in Baton Rouge, Louisiana, and model results were used to analyze the behavior of phosphorus concentrations in storm runoff from these basins over a long period of time.     

Accidents and risk control

A framework for transformation of knowledge and experience from risk analysis to emergency education is presented. An accident model was developed built on the concept “uncontrolled flow of energy (UFOE)”, where essential elements are the state, location and movement of the energy. A UFOE can be considered as the driving force of an accident, e.g. an explosion, a release of heavy gases. A domain model has been developed for representing emergencies occurring in society. A domain is a group of activities with allied goals and elements, and the domain model uses three main categories: status, context and objectives. Ten specific domains have been investigated including process plant, energy production and distribution, natural disasters and different sorts of transport. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain.     

Laboratory scale studies on gaseous emissions generated by the incineration of an artificial automotive shredder residue presenting a critical composition

Car manufacturers must eliminate automotive shredder residues (ASR). Two ways of incineration are of interest: at 850°C in municipal waste incinerators or at higher temperatures, above 1100°C in cement plants. These processes reduce the mass and the volume of waste to be disposed of in landfills and energy recovery might be possible. Regulations govern the emission of gaseous effluents to control environmental risk. To determine gaseous effluents from a pilot sacle or an industrial incineration plant, an artificial ASR was made by mixing three representative organic polymers present in the real ASR, namely polyvinylchloride, polyurethane and rubber. This mixture was incinerated at 850 and 1100°C in laboratory experiments and the analyses of the principal gaseous effluents such as carbon oxides, nitrogen oxides, volatile organic compounds, hydrochloric and hydrocyanic acids and sulphur compounds are presented and discussed. Lastly, in order to simulate artificial ASR behaviour, the composition of the combustion gases at equilibrium was calculated using a Gibbs energy minimisation code.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Groundwater Remediation and Aquifer Clean-Up: A Case Study

Groundwater was being remediated with pump and treat technology at a facility where the groundwater was contaminated with commonly used degreaser solvents. Hydraulic conductivity of the heterogeneous residuum was beneficiated by applying pneumatic fracturing technology. The remedial system was controlled and monitored by a sophisticated remote telemetry system. A case history follows.