Effects of pore volume-transmissivity correlation on transport phenomena

The relevant velocity that describes transport phenomena in a porous medium is the pore velocity. For this reason, one needs not only to describe the variability of transmissivity, which fully determines the Darcy velocity field for given source terms and boundary conditions, but also any variability of the pore volume. We demonstrate that hydraulically equivalent media with exactly the same transmissivity field can produce dramatic differences in the displacement of a solute if they have different pore volume distributions. In particular, we demonstrate that correlation between pore volume and transmissivity leads to a much smoother and more homogeneous solute distribution. This was observed in a laboratory experiment performed in artificial fractures made of two plexiglass plates into which a space-dependent aperture distribution was milled. Using visualization by a light transmission technique, we observe that the solute behaviour is much smoother and more regular after the fractures are filled with glass powder, which plays the role of a homogeneous fault gouge material. This is due to a perfect correlation between pore volume and transmissivity that causes pore velocity to be not directly dependent on the transmissivity, but only indirectly through the hydraulic gradient, which is a much smoother function due to the diffusive behaviour of the flow equation acting as a filter. This smoothing property of the pore volume-transmissivity correlation is also supported by numerical simulations of tracer tests in a dipole flow field. Three different conceptual models are used: an empty fracture, a rough-walled fracture filled with a homogeneous material and a parallel-plate fracture with a heterogeneous fault gouge. All three models are hydraulically equivalent, yet they have a different pore volume distribution. Even if piezometric heads and specific flow rates are exactly the same at any point of the domain, the transport process differs dramatically. These differences make it important to discriminate in situ among different conceptual models in order to simulate correctly the transport phenomena. For this reason, we study the solute breakthrough and recovery curves at the extraction wells. Our numerical case studies show that discrimination on the basis of such data might be impossible except under very favourable conditions, i.e. the integral scale of the transmissivity field has to be known and small compared to the dipole size. If the latter conditions are satisfied, discrimination between the rough-walled fracture filled with a homogeneous material and the other two models becomes possible, whereas the parallel-plate fracture with a heterogeneous fault gouge and the empty fracture still show identifiability problems. The latter may be solved by inspection of aperture and pressure testing.     

The erect ‘penis’ is a flag of submission in a female-dominated society: greetings in Serengeti spotted hyenas

In East Africa, spotted hyenas live in large clans in a highly structured society dominated by females. A clan is a fission-fusion society where members are often solitary or in small groups. Spotted hyenas have a ritualized greeting during which two individuals stand parallel and face in opposite directions. Both individuals usually lift their hind leg and sniff or lick the anogenital region of the other. The unique aspect of greetings between individuals is the prominent role of the erect penis in animals of both sex. Female spotted hyenas have fused outer labiae and a pseudo-penis formed by the clitoris which closely resembles the male penis and can be erected. During greetings subordinates signalled submission with gestures which were not necessarily reciprocated by the dominant participant. Asymmetries were most pronounced in greetings between adult females where the probability of asymmetries increased with the divergence in rank between partners. Greetings between adult females and males were uncommon and restricted to males above median rank, principally the alpha male. Models of primate affiliative behavior assume that benefits derived from social relationships with different individuals are not equal and that individuals are selected to maximize the benefits they receive from social relationships with others. The observed distribution of greetings between partners of different rank matched the predictions of these models. An examination of non-adaptive hypotheses on the evolution of the pseudo-penis demonstrated that the conventional scenario linking (initial) virilization of female genitalia with selection for female dominance does not explain either the initial virilization, nor the evolution of the pseudo-penis to its current form and use. We sketch a new scenario that links (1) initial virilization to the occurrence of neonatal siblicide amongst members of a twin litter, and (2) costs of maintenance, pseudo-penile control over copulation and male submission. Our analysis confirms previous adaptive hypotheses on the function of the pseudo-penis in greetings and suggests new hypotheses to account for hitherto unexplained features. Correspondence to: M.L. East     

Photometrische Bestimmung der Zytotoxizität von Chemikalien

Two test methods are presented to assess the cytotoxicity of chemicals. On one hand the protozoonTetrahymena pyriformis and on the other the bacteriumPseudomonas aeruginosa is cultured in defined media containing the test chemicals. Test parameter is the quantity of living cells surviving exposure. The conversion of the tetrazolium salt MTT into formazan is equivalent to cell viability. A mixture of detergent and isopropanol is used to dissolve the blue formazan which is not soluble in water, prior to photometric measurement. For cetyltrimethylammonium bromide, benzyldimethyldodecylammonium chloride, dodecylbenzenesulfonic acid sodium salt, potassium dichromate, 4-toluenesulfonic acid sodium salt, and 4-nitrophenol the EC50-values (mol/l) in theTetrahymena pyriformis- (Pseudomonas aeruginosa) test system were: 10^?5,81 (10^?5,08); 10^?4,68) (10^?3,80; 10^?4,50 (10^?4,14); 10^?3,97 (10^?5,11); 10^?2,71 (10^?2,50) and 10^?4,00 (10^?3,64). — With the assays described here it is possible to measure a large number of samples by quick and simple means.     

The European Water Framework Directive: Water Quality Classification and Implications to Engineering Planning

The European Water framework directive (WFD) is probably the most important environmental management directive that has been enacted over the last decade in the European Union. The directive aims at achieving an overall good ecological status in all European water bodies. In this article, we discuss the implementation steps of the WFD and their implications for environmental engineering practice while focusing on rivers as the main receiving waters. Arising challenges for engineers and scientists are seen in the quantitative assessment of water quality, where standardized systems are needed to estimate the biological status. This is equally of concern in engineering planning, where the prediction of ecological impacts is required. Studies dealing with both classification and prediction of the ecological water quality are reviewed. Further, the combined emission–water quality approach is discussed. Common understanding of this combined approach is to apply the most stringent of either water quality or emission standard to a certain case. In contrast, for example, the Austrian water act enables the application of only the water quality based approach - at least on a temporary basis.     

Leaching Induced Changes in Substrate and Solution Chemistry of Mine Soil Microcosms

Leaching of soluble salts formed as the result of pyrite oxidation and primary mineral weathering is a major process in mine soil development. A microcosm experiment was designed to study leaching rates from mine soil columns under controlled laboratory conditions. Objectives of this experiment were to investigate the effect of leaching and the effect of fly ash amelioration on mid- to long-term chemical soil properties, and to test whether the results are qualitatively comparable to long-term field studies along a site chronosequence. The leaching experiment was conducted over a period of 850 days representing a kind of time-lapse picture due to high water fluxes. Leaching resulted in more favourable mid- to long-term properties of mine site topsoils, especially a reduced risk for acidity and salt stress. Ash amelioration decreases leaching rates by increasing pH and Al and Fe precipitation. It could be shown that the results of the column leaching studies are qualitatively in good agreement with field observations at least for long-term considerations. By enhancing the leaching process mid- to long-term chemical soil properties can be estimated.     

解关于河流的一维污染物质迁移方程的有限差分法

一、引言 在非稳态的情况下,我们可以写出在河流中进行一级衰变反应的污染物质迁移方程(1): 一般情况下必须求助于数值方法来解方程(1)。我们推荐两个差分体系,在强烈不稳定的边界条件下,这两个体系都被证明是可靠的。我们选择一个均一的河段与一个可以得到解析解的边界条件作为例证。这样的例子可以用来估算示踪研究的参数和确定事故排     

Altitude profiles of total chlorinated paraffins in humus and spruce needles from the Alps (MONARPOP)

Chlorinated paraffins (CPs) are toxic, bioaccumulative, persistent, and ubiquitously present in the environment. CPs were analyzed in humus and needle samples, which were taken within the Monitoring Network in the Alpine Region for Persistent and other Organic Pollutants (MONARPOP) at sampling sites of 7 different altitude profiles in the Alps. Gas chromatography combined with electron ionization tandem mass spectrometry (EI-MS/MS) was used for the determination of total CPs (sum of short, medium and long chain CPs). CPs were found in all samples; the concentrations varied between 7 and 199 ng g⁻¹ dry weight (dw) and within 26 and 460 ng g⁻¹ dw in humus and needle samples, respectively. A clear vertical tendency within the individual altitude profiles could not be ascertained. Within all altitude profiles, elevated concentrations were observed in humus samples taken between 700 and 900 m and between 1300 and 1500 m. In the needle samples no similar correlation could be observed due to higher variation of the data.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia Usneoides (L.) in an industrialized area in Rio de Janeiro state, south east Brazil--Part I: PCDD and PCDF

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic Bromeliad species as biomonitor and measuring total deposition rates on funnels covered with polyurethane foams. Samples were collected during 78 days in V.R. and 95 days in PNI in winter (dry season, June-August 2003) and during 114 days in both areas in summer (rainy season, December 2003-February 2004). The PCDD/PCDF deposition rates ranged from 0.10 to 1.9 pg WHO-TEQ/(m2 day) in winter and from 0.11 to 2.2 pg WHO-TEQ/(m2 day) in summer. Deposition rates found in V.R. in summer were four- to ninefold higher than those measured in PNI, while in winter deposition rates in both regions were in the same range. Deposition rates in V.R. in summer were about five fold lower than those measured in 1996. PCDD/PCDF levels in biomonitor samples were between 0.95 and 14.6 ng WHO-TEQ/kg d.m. in winter and between 2.2 and 5.2 ng WHO-TEQ/kg d.m. in summer. In winter, concentrations found in V.R. were up to 11 times higher than those found in PNI, while in summer the levels measured in both areas were comparable. The homologue and isomer profiles found in the deposition as well as in the biomonitor samples from V.R. indicate that steel production is the main source of contamination in the region, whereas in PNI, the long range transport of these pollutants is the predominant contamination pathway.