Monitoring of iodinated X-ray contrast media in surface water

A monitoring programme was carried out in order to determine iodinated X-ray contrast media (ICM) in the River Danube and to investigate the raw water quality for drinking water production at Langenau waterworks. The study revealed that the maximum concentrations of ICM (over 500 ng l(-1) for diatrizoic acid and iopamidol) were found in 2h-composite samples taken from the downstream of the Ulm/Neu-Ulm metropolitan area. By means of a concentration profile over one month the highest ICM concentrations were observed on weekdays. The extended data evaluation with principal component analysis shows that the upstream and downstream samples had different pattern of variations in ICM concentration and also demonstrates a clear change in ICM composition by the discharge of municipal wastewater. In addition to load profiles of ICM, time-dependent plots of principal component 1 exhibited peaks, indicating a short-term discharge of ICM between the two sampling sites. In conclusion, a point source for ICM contamination between the sampling sites in Ulm upstream and Leipheim downstream seems to be the reasonable explanation for peak ICM concentrations. Due to the observed high variations of ICM concentrations in river, the evaluation of natural waters by means of a single analysis is not representative.     

Energy expenditure for mouthbrooding in a cichlid fish

Summary Energy costs of mouthbrooding were investigated in the East African maternal mouthbrooder Pseudocrenilabrus multicolor by measuring rates of oxygen consumption. Mothers with their brood in the mouth expended 15.7% more energy than mothers without their brood and 13.8% more than starving nonreproductive controls. After subtracting the energy expenditure of the brood, the excess is reduced to 4.7% and 3.2%, respectively, a difference that is not statistically significant. By contrast, feeding nonreproductive females expended more than twice as much energy as the other groups. We conclude that mouthbrooding is a low-cost strategy profiting from investments made during the preceding nonreproductive phase. The implications for the evolution of mouthbrooding are discussed within the context of ecological constraints.     

Die ökologische Bewertung von Seeufern in Deutschland

Goal and Scope

Details about the ecological function of lake shores as ecotones between land and lakes are not well-known. These ecotones are also heavily exploited and, in part, considerably changed. Whereas anthropogenic nutrient loading is decreasing, structural changes are increasing. Unfortunately, there is a deficit in methods of evaluation and decision processes.

Main Focus

Even the EU-water framework directive was no remedy for this deficit, as lake shores were included only implicitly. In this article several evaluation methods and their conceptual groundwork are presented. However, these methods were not developed for lake shore research. Therefore, criteria are proposed which could fulfill the specific demands of lake shore assessments. The management of lakes shores should consider structural and biological parameters, and be agreeable to local residents.

Results and Conclusions

In addition to conventional biodiversity methods, the ecology of lake shores could also be represented by a functional food net, for example in benthic invertebrates. But even quantification of biodiversity alone creates many problems. A simple biodiversity index cannot meet all the demands placed on a method of evaluation in complex situations, especially when coupled with additional information on structure, practicability, costs, etc. For these reasons, assessments for future management cannot be based on such an index.

Outlook

A possible approach to include this complexity in assessments is to apply mathematical models and theoretical order concepts.     

Polycyclic aromatic hydrocarbon storage in a typical Cerrado of the Brazilian savanna

There may be important biological sources of polycyclic aromatic hydrocarbons (PAHs) to the global environment, particularly of naphthalene, phenanthrene, and perylene, that originate in the tropics. We (i) studied the distribution of PAHs among different compartments of a typical Cerrado to locate their sources and (ii) quantified the PAH storage of this ecosystem. The sum of 20 PAH (sigma20PAHs) concentrations ranged from 25 to 666 microg kg(-1) in plant tissue, 7.4 to 32 microg kg(-1) in litterfall, 206 to 287 microg kg(-1) in organic soil, and 10 to 79 microg kg(-1) in mineral soil. Among the living biomass compartments, the bark had the highest mean PAH concentrations and coarse roots the lowest, indicating that PAHs in the plants originated mainly from aboveground sources. Naphthalene and phenanthrene were the most abundant individual PAHs, together contributing 33 to 96% to the sigma20PAHs concentrations. The total storage of the X20PAHs in Cerrado was 7.5 mg m(-2) to a 0.15-m soil depth and 49 mg m(-2) to a 2-m soil depth. If extrapolated to the entire Brazilian Cerrado region, roughly estimated storages of naphthalene and phenanthrene correspond to 7300 and 400 yr of the published annual emissions in the United Kingdom, respectively. The storage of benzo[a]pyrene, a typical marker for fossil fuel combustion, in the Cerrado only corresponds to 0.19 yr of UK emissions. These results indicate that the Brazilian savanna comprises a huge reservoir of naphthalene and phenanthrene originating most likely from the aboveground parts of the vegetation or associated organisms. Thus, the Cerrado might be a globally important source of these PAHs.     

CCall--healthy and successful work in call centres.

Call centre workplaces are in many ways a challenge to occupational health and safety. The occupation itself can be described as an IT information technology-supported, communication-intensive form of work with often unusual working hours and a high rate of part-time employment. Data on the employee turnover as well as absenteeism related to occupational disability is quite contradictory. Occupational safety and its proponents still have to find new ways into the corporate structures and cultures of this relatively new and rapidly growing branch of industry. In a 2-year research and development project, using a holistic approach and under consideration of all the relevant disciplines, call centre workplaces were studied, and organisational measures were developed and field tested by putting them into practice. Practical help was developed for a sustainable strategy for successful and healthy work in call centres.     

Is this trail too crowded? A choice experiment to evaluate tradeoffs and preferences of park visitors in Garibaldi Park,British Columbia

Large crowds in parks can be a problem for park managers and visitors. However, perceptions of crowding are difficult to measure due to coping mechanisms deployed by park visitors. Furthermore, perceptions of crowding should not be measured in isolation, but rather as part of a suite of conditions that comprise the visitors’ outdoor experience. We used a dichotomous choice experiment with visual images and eight attributes to estimate park users’ utilities associated with their visitor experience in Garibaldi Provincial Park in British Columbia, Canada. Our visual method allowed us to control for background view and compare user preferences on hiking trails with preferences at final destinations. We find that utilities are more sensitive to crowding at viewpoints than to other aspects of the outdoor experience. Thus, visitor satisfaction and crowding perceptions are more likely to be defined by where visitors have these encounters rather than the total number of encounters.     

Phenomenological compensation of thermally caused position and orientation errors of rotary axes

Thermal errors of machine tools are one of the major sources of inaccuracy. Therefore, the reduction of temperature induced deviations or the compensation of the resulting tool center point (TCP) errors have been of strong interest to the manufacturing industry for a couple of years. Up to now, the observation of the environment, the main spindle, the linear axes and the machine bed were in the focus of research, but with the rising demand for 5-axis machine tools and the increasing requirements regarding their accuracy, the analysis of the thermal behavior of rotary axes becomes more and more important. This paper gives an overview of corresponding thermal measurements of machine tools. The thermal behavior of rotary and swiveling axes is analyzed in detail. A simulation model and an approach for a phenomenological compensation of the TCP error are introduced and verified by measurements.