Microbial spheres: a novel cyanobacterial–diatom symbiosis

Cyanobacteria, algae and bacteria are widespread inhabitants of North Sea microbial mats. Our studies of these populations showed uncommon modes of living and extraordinary structures, which have not been described before. The structures are spherical objects covering a community of cyanobacteria, diatoms and bacteria. The cultivation of these communities in the laboratory and intensive observations of their exceptional movement has led to some spectacular findings. The sphere formations go through different phases with variation in the dominance of different microorganisms. The role of the bacteria is the most important in the first phase, and can be increased by the addition of signal substances. Spheres surrounded by envelopes of unknown composition and permeability appear, with numerous bacteria and sporadic diatoms inside. Then the cyanobacteria penetrate the spheres and arrange themselves at the surface. The communities proliferate over some weeks and are finally released. Laboratory expositions of the microbial communities to different parameters pinpoint the limits of sphere formation. The metabolic products of the sphere communities are concentrated in the spheres and lead to a different kind of compound compared with the surrounding environment. In this way, the microbial communities strongly influence the structure of the sediments. Uncommon circular structures, which develop into spheres between 0.08 and 3 mm in size were found in subcultures of non-axenic filamentous cyanobacteria enrichments from North Sea microbial mats. These filamentous cyanobacteria (Phormidium sp.) together with associated benthic diatoms of the genus Navicula and associated heterotrophic bacteria were held as reproducible synergistic cultures. Phormidium sp. filaments tightly intertwined with each other, formed the surface of the spheres, trapping diatoms inside. The formation of "spheres" was the result of radial and synchronous movements of the cyanobacteria. In old cultures, the direction of the cyanobacterial movement has turned in the opposite direction, away from the sphere. The integrity of large "spheres" was influenced by chemotactic phenomena and maintained by some type of trichome-trichome interaction. This suggests the presence of metabolic secondary products, which attract cyanobacteria and influence their movement in a form of chemotactic response.     

Rapid karyotyping for prenatal diagnosis in the second and third trimesters of pregnancy

Direct chromosome preparations were performed on placental villi obtained by ultrasoundguided needle aspiration between 18 and 37 weeks of pregnancy in 53 patients. The sampling yielded a sufficient amount of tissue with a maximum of two, and in most cases one, insertions. Placental biopsy is easily performed in cases of severe oligohydrammnios, where fetal blood sampling is usually more difficult. Direct karyotyping of placental villi is faster than chromosome analysis from fetal blood or application of the pipette method on amniotic fluid cells, and currently represents the most rapid approach to prenatal diagnosis of chromosomal abnormalities from the first to the third trimester of pregnancy.     

Butterfly community shifts over two centuries

Environmental changes strongly impact the distribution of species and subsequently the composition of species assemblages. Although most community ecology studies represent temporal snap shots, long‐term observations are rather rare. However, only such time series allow the identification of species composition shifts over several decades or even centuries. We analyzed changes in the species composition of a southeastern German butterfly and burnet moth community over nearly 2 centuries (1840–2013). We classified all species observed over this period according to their ecological tolerance, thereby assessing their degree of habitat specialisation. This classification was based on traits of the butterfly and burnet moth species and on their larval host plants. We collected data on temperature and precipitation for our study area over the same period. The number of species declined substantially from 1840 (117 species) to 2013 (71 species). The proportion of habitat specialists decreased, and most of these are currently endangered. In contrast, the proportion of habitat generalists increased. Species with restricted dispersal behavior and species in need of areas poor in soil nutrients had severe losses. Furthermore, our data indicated a decrease in species composition similarity between different decades over time. These data on species composition changes and the general trends of modifications may reflect effects from climate change and atmospheric nitrogen loads, as indicated by the ecological characteristics of host plant species and local changes in habitat configuration with increasing fragmentation. Our observation of major declines over time of currently threatened and protected species shows the importance of efficient conservation strategies.     

A new approach to estimation of methane emission rates from landfills

Methane emission monitoring has become increasingly essential for diffusive area sources, especially for landfills, which contribute to a significant fraction of the total anthropogenic methane emission globally. Statutorily, methane emission rate from landfills in Germany shall be examined on a semiannual basis; however, an appropriate approach has yet to be developed and adopted for general use. In this study, a new method is proposed based on experimental results, which utilizes a TDLAS (Tunable Diode Laser Absorption Spectroscopy) instrument – GasFinder2.0® system and a dispersion model LASAT (Lagrangian Simulation of Aerosol Transport) as the measurement device and calculation model, respectively. Between April 2010 and December 2011, a research project was conducted at a pilot scale landfill in the south of Germany. Drawing on the extensive research into this pilot project, an effective strategy of measurement setup was determined. Methane concentration was measured with GasFinder2.0® system in the upstream and downstream sections of the project site, while wind and turbulence data were measured simultaneously by an ultrasonic anemometer. The average methane emission rate from the source can be calculated by using the results as input data in the dispersion model. With this method, site-specific measurement approaches can be designed for not only landfills, but also different diffusive area sources with less workload and lower cost compared to conventional FID (Flame Ionization Detector) method.     

Effect of contact time on the release of contaminants from granular waste materials during column leaching experiments

When reusing or disposing of contaminated granular waste materials there is a need to evaluate how the contaminants will interact on the pathway soil–groundwater and the effect this interaction will have on the surrounding environment. While column testing can provide a closer approximation to field percolation conditions than batch testing, there is still a need to develop column testing procedures that consider the requirements of practical testing time frames. This study evaluates the effect of different column contact times (2.5, 5, and 16 h) on the release of inorganic constituents from bottom ash and demolition waste, two commonly reused granular materials. Leaching data for representative constituents of concern, such as copper, chromium, sulfate and chloride, as well as pH and electrical conductivity was compared for all different contact times studied.Results for the materials investigated in this study showed that variations in contact time have no significant effect on the release of the selected constituents and leaching parameters at low liquid to solid ratios. However, after a liquid to solid ratio of 1 L/kg, the effect is more noticeable, and higher contact times show lower pH values as well as a reduction in the release of constituents of concern from bottom ash. In the case of demolition waste, the variation of contact time did not have a strong effect on the leaching behavior.     

Spatial variability of arsenic and chromium in the soil water at a former wood preserving site

Contamination of industrial sites by wood preservatives such as chromated copper arsenate (CCA) may pose a serious threat to groundwater quality. The objective of this study was to characterise the spatial variability of As and Cr concentrations in the solid phase and in the soil water at a former wood impregnation plant and to reveal the fundamental transport processes. The soil was sampled down to a depth of 2m. The soil water was extracted in situ from the vadose zone over a period of 10 months at depths of 1 and 1.5m, using large horizontally installed suction tubes. Groundwater was sampled from a depth of 4.5m. Results showed that arsenic and chromium had accumulated in the upper region of the profile and exhibited a high spatial variability (As: 21-621 mg kg(-1); Cr: 74-2872 mg kg(-1)). Concentrations in the soil water were high (mean As 167 microg L(-1); Cr: 62 microg L(-1)) and also showed a distinct spatial variability, covering concentration ranges up to three orders of magnitude. The variability was caused by the severe water-repellency of the surface soil, induced by the concurrent application of creosote wood preservatives, which leads to strong preferential flow as evident from a dye experiment. In contrast to soil water concentrations, only low As concentrations (<12 microg L(-1)) were detected in the groundwater. High Cr concentrations in the groundwater (approx. 300 microg L(-1)), however, illustrated the pronounced mobility of chromium. Our study shows that at sites with a heterogeneous flow system in the vadose zone a disparity between flux-averaged and volume-averaged concentrations may occur, and sampling of soil water might not be adequate for assessing groundwater concentrations. In these cases long-term monitoring of the groundwater appears to be the best strategy for a groundwater risk assessment.