Photoelectrochemical degradation of Methylene Blue with -PbO2 electrodes driven by visible light irradiation

-PbO2 electrodes were prepared by electro-deposition and characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and linear sweep voltammetry. We confirmed pure -PbO2 crystals were on the electrode and it had a high oxygen evolution potential. The photoactivity and photoelectrochemical (PEC) properties of the -PbO2 electrode were investigated under visible light irradiation ( > 420 nm) for the decolorization of Methylene Blue. Pseudo first-order kinetics parameter (Kapp) for dye decolorization using the -PbO2 electrode achieved 6.71×10?4 min?1 under visible light irradiation, which indicated its excellent visible light-induced photoactivity. The Kapp of the PEC process was as much as 1.41×10?3 min?1 and was 1.71 times that of visible light irradiation or electrolysis even in the presence of the -PbO2 electrode. A significant synergetic effect was observed in the PEC system. We also employed TiO2 modified -PbO2 electrodes in this test, which revealed that the TiO2 immobilized on the -PbO2 electrode inhibited the visible light-induced PEC efficiency despite the amount of TiO2 used for electrode preparation. The -PbO2 electrode was also superior to the dimensionally stable anode (Ti/Ru0:3Ti0:7O2) in visible light-induced photoactivity and PEC efficiency.     

Investigation of drinking water bacterial community through high-throughput sequencing

<正>Delivery of safe and pathogen-free drinking water is crucial to public health.However,there exist challenges to the maintenance of the sterility of drinking water throughout the drinking water distribution systems(DWDS).Microbial growth in DWDS,such as growth of opportunistic pathogenic microorganisms,can lead to severe health problems in consumers(Berry et al.,2006;Brettar and Hofle,2006;Lu et al.,2014;Zhang et al.,2015).     

An analysis for the causes of accidents of repair,maintenance, alteration and addition works in Hong Kong

This study unveils causes of accidents in repair, maintenance, alteration and addition (RMAA) work. RMAA work is playing an increasingly important role in developed societies, including Hong Kong. Safety problems associated with RMAA work in Hong Kong has reached an alarming level. In view of rapid expansion of the RMAA sector and rising proportion of accidents in the construction industry, there is a pressing need to investigate causes of RMAA accidents. Structured interviews were conducted with RMAA contractors to explore causes of accidents in the RMAA sector. A two-round Delphi method with 13 safety experts was subsequently employed to verify the interview findings and rank the relative degree of importance for various causes of accidents. Accidents happen in RMAA work due to intersection of reasons. One of the root causes of accidents in RMAA works is low safety awareness of RMAA workers; however, wider organizational and industrial factors are not negligible. This study sheds light on why accidents happen in the RMAA sector. Only when the factors leading to accidents are identified can effective measures be made.     

The forest frontier in the Global South: Climate change policies and the promise of development and equity

Halting forest loss and achieving sustainable development in an equitable manner require state, non-state actors, and entire societies in the Global North and South to tackle deeply established patterns of inequality and power relations embedded in forest frontiers. Forest and climate governance in the Global South can provide an avenue for the transformational change needed—yet, does it? We analyse the politics and power in four cases of mitigation, adaptation, and development arenas. We use a political economy lens to explore the transformations taking place when climate policy meets specific forest frontiers in the Global South, where international, national and local institutions, interests, ideas, and information are at play. We argue that lasting and equitable outcomes will require a strong discursive shift within dominant institutions and among policy actors to redress policies that place responsibilities and burdens on local people in the Global South, while benefits from deforestation and maladaptation are taken elsewhere. What is missing is a shared transformational objective and priority to keep forests standing among all those involved from afar in the major forest frontiers in the tropics.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01602-1.     

Analysis of the number of flux chamber samples and study area size on the accuracy of emission rate measurements

Monte Carlo simulations were conducted on a set of flux chamber measurements at a landfill to estimate the relationship between the number of flux chamber samples and study area size on the emission rate measurement accuracy. The spatial variability of flux was addressed in the study by utilizing an existing flux chamber measurement data set that is one of the most dense flux chamber sampling arrays published to date for a landfill. At a probability of 95%, the Monte Carlo simulations indicated that achieving an accuracy within 10% with the flux chamber method is highly unlikely. An accuracy within 20% was achieved for small areas of less than about 0.2 hectares using 220 flux chamber measurements, but achieving this level of accuracy for area emission sources, of similar or greater variability, that are larger than this is highly unlikely. An accuracy within 30% was achieved up to the Full Area of about 0.4 hectares if more than approximately 120 samples were obtained. Even for an accuracy within 50%, at least 40 flux chamber measurements were needed for the Full Area of about 0.4 hectares. Available methods of estimating the number of samples required were compared to the Monte Carlo simulation results. The Monte Carlo simulations indicate that, in general, more samples are required than determined from an existing statistical method, which is a function of the mean and standard deviation of the population. Specifying the number of samples based on a regulatory method results in very poor accuracy. A modification to the statistical method for estimating the number of samples, or for estimating an accuracy for a given probability and number of samples, is proposed.

Implications: The flux chamber method is the most widely used method of measuring fugitive emission rates from area sources. However, extrapolation of a set of individual flux chamber samples to a larger area results in area flux measurement values of unknown accuracy. Quantification of the accuracy of the extrapolation of a set of flux chamber measurements would be beneficial for understanding the confidence that can be placed on the measurement results. Guidance as to the appropriate number of flux chamber measurements to achieve a desired level of accuracy would benefit flux chamber method practitioners.     

Comparative degradation between heavy and light crude oil mediated by nitrogen‐induced cell‐surface hydrophobicity

A bacterial strain UKMP‐10M2 isolated from a Malaysian petroleum refinery was able to degrade 84% of heavy Khafji sour crude and 68% of light Tapis sweet crude within seven days. Analysis of gas chromatography‐flame ionization detector chromatograms show the strain UKMP‐10M2 degraded up to 90% pristane and 50% phytane in heavy crude, but significantly lower pristane (50%) and phytane (30%) were degraded from the light crude. A mixture of aliphatic hexadecane and three‐ring phenanthrene better supported the growth of isolate UKMP‐10M2 compared to using phenanthrene alone, suggesting cometabolism influenced how crude oil with different individual hydrocarbon contents affected the degradation. Peptone as the source of nitrogen increases the emulsifying index in UKMP‐10M2 exposed to heavy Khafji sour crude 20% higher than in light Tapis sweet crude. However, BATH assay showed the same nitrogen source increases bacterial cell surface hydrophobicity of UKMP‐10M2 up to 14% higher in light Tapis crude oil compared to heavy Khafji. This study suggest the nitrogen source plays a decisive role in elevating UKMP‐10M2 bacterial cells hydrophobicity, and in correlation with types of crude oil. Phylogenetic tree analysis based on 16S rDNA sequence results identified the strain to be Rhodococcus ruber.     

Biosorption study of potential fungi for copper remediation from Peninsular Malaysia

The ability to grow in heavy metal contaminated areas and absorb heavy metals from the environment make fungi a potentially viable biological‐based technology for remediating hazardous heavy metals in soil. In this study, 10 fungi from a copper (Cu)‐polluted area in Malaysia were isolated, with the four highest growth fungi identified as Simplicillium subtropicum, Fusarium solani, Aspergillus tamari, and Aspergillus niger. Results from toxicity and biosorption testing showed that A. niger and F. solani grew the fastest in the presence of Cu, but exhibited lower Cu uptake per unit of biomoass. In contrast, A. tamarii and S. subtropicum had lower growth rates, but showed better uptake of Cu per unit of biomass. S. subtropicum was identified as the best species for bioremediation because it had the highest Cu uptake and positive growth measured in the presence of Cu at concentrations below 100 mg/L. A niger proved to be most suitable for bioremediation if the concentration of Cu exceeds 100 mg/L.     

Preliminary occurrence studies of antibiotic residues in Hong Kong and Pearl River Delta

An improved liquid chromatography–tandem mass spectrometry (LC-MS/MS) method was developed and validated to investigate the occurrence of selected antibiotic residues in Hong Kong and Pearl River Delta. LC and MS parameters were optimized to produce the maximum analytical responses for each compound. The established method targeted five groups of antibiotics, namely, macrolides, sulfonamides, tetracyclines, quinolones, and amphenicols. The method was validated for three types of environmental water matrices, namely, reservoir, river, and estuarine waters. Low detection limits of 0.17–0.18 ng/L for macrolides, 0.22–0.34 ng/L for quinolones, 0.67–1.65 ng/L for tetracyclines, and 0.27–0.56 ng/L for sulfonamides were obtained. No apparent interferences were observed in the chromatograms of all antibiotics groups. The developed method was preliminarily used to analyze water samples collected from Yuen Long River in New Territories, Hong Kong and four sites along the Pearl River Delta. Results showed that high level of tetracycline was found among the groups tested in the local river samples. In Pearl River Delta, we identified significant levels of erythromycin, roxithromycin, and sulfadiazine in Shenzhen Reservoir.     

Separation and measurement of thorium, plutonium, americium, uranium and strontium in environmental matrices

A technique for the isolation of thorium (Th), plutonium (Pu), americium (Am), uranium (U) and strontium (Sr) isotopes from various environmental matrices has been adapted from a previously published method specific to water samples (Maxwell, 2006). Separation and isolation of the various elemental fractions from a single sub-sample is possible, thereby eliminating the need for multiple analyses.The technique involves sample dissolution, concentration via calcium phosphate co-precipitation, rapid column extraction using TEVA™, TRU™ and Sr-Spec™ resin cartridges, alpha spectrometry for Th, Pu, U and Am and Cerenkov counting for Sr.Various standard reference materials were analysed and chemical yields are in the range of 70-80% for Th, Am, U and Sr and 50-60% for Pu. Sample sizes of up to 10 L for water, 5 g for dry soil and sediment and 10 g for dry vegetation and seaweed can be processed using this technique.     

Assessment of risk to humans of bisphenol A in marine and freshwater fish from Pearl River Delta, China

Bisphenol A (BPA) is a high production-volume chemical used in the manufacture of a wide variety of consumer products. However it is also a ubiquitous contaminant that can interfere with endocrine systems of wildlife and humans. China is the “world factory” and the Pearl River Delta is the major manufacturing center and is consequently polluted. Concentrations of BPA in meats of marketable fish had not been previously reported for this region. In the study upon which we report here concentrations of BPA were determined in 20 common species of freshwater and marine fish, collected from markets in Hong Kong, SAR, China. A comprehensive analytical method based on SPE extraction and liquid chromatography electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) was developed, validated and applied. The method limit of detection (LOD) and limit of quantification (LOQ) were 0.5 and 1.25 ng g⁻¹ dw, respectively. BPA was detected in 19 species of fish at concentrations, ranging from 0.5 to 2.0 ng g⁻¹ ww. Average daily BPA intake per person ranged from 1.1 × 10² ng d⁻¹ for marine fish and 2.2 × 10² ng d⁻¹ for freshwater fish. Concentrations of BPA in fish from Hong Kong markets unlikely would be causing adverse population-level effects in humans.