Removal of selected natural and synthetic estrogenic compounds in a Canadian full-scale municipal wastewater treatment plant.

The effect of a full-scale municipal wastewater treatment plant (WWTP) and each of the treatment units within the stream on the removal of endocrine-disrupting compounds was evaluated by tracking 17-beta-estradiol (E2), estrone (E1), and 17-alpha-ethinylestradiol (EE2). The overall performance of the WWTP compared well with other plants, as 90.5% removal of E1+E2 and 74.9% removal of EE2 were observed. A larger fraction of EE2 entered the plant in particulate form than E1 and E2, while a lower fraction of EE2 left the plant in particulate form than soluble form. The activated sludge units reduced the concentration of E1+E2 and EE2 in the liquid phase by 88.2% and 44.6%, respectively. The UV treatment process did not reduce the amount of estrogens. The aqueous phase of the tertiary lagoon solids contained higher levels of estrogens compared with the lagoon influent.     

Bioleaching of heavy metals from anaerobically digested sewage sludge using FeS2 as an energy source

The effect of using FeS2 as an energy source, on the bioleaching of heavy metals (Zn, Cr, Cu, Pb and Ni) and nutrients (nitrogen and phosphorus) from anaerobically digested sludge using isolated indigenous iron-oxidizing bacteria was investigated in this paper. Addition of FeS2 in the range of 0.5-4.0 g l(-1) accelerated the acidification of sludge and raised the oxidation-reduction potential of sludge medium with an inoculation of 15% (v/v) of active bacteria, thus resulting in an overall increase in metal dissolution efficiency. After 16 days of bioleaching at 28 degrees C and an initial pH of 3.0, up to 99% of Zn, 65% of Cr, 74% of Cu, 58% of Pb and 84% of Ni can be removed from the sludge. In contrast, only 94% of Zn, 12% of Cr, 21% of Cu, 32% of Pb and 38% of Ni were leached out in the control without inoculation of iron-oxidizing bacteria and the addition of FeS2. Less than 15% of nitrogen and 6% of phosphorous were lost after 16 days of bioleaching when using FeS2 as the energy source. Comparing to 39% and 45% loss respectively for these two nutrients when using FeSO4.7H2O as the energy source, FeS2 appears to be a more suitable energy source for preserving nutrients in sludge while removing heavy metals from sludge.     

Using experimental and forest soils to investigate the uptake of polycyclic aromatic hydrocarbons (PAHs) along an urban-rural gradient

Spatial and temporal variation in the atmospheric deposition of PAHs to soil was examined by deploying experimental soils for approximately 165 days and conducting a survey of forest soils at several sites along an urban-rural transect extending from downtown Toronto to approximately 80 km north of the city. PAH concentrations decreased with distance from the urban centre-by a factor of 2 and 60 for the experimental and forest soils respectively. The large gradient for the forest soils is generally consistent with air concentrations of PAHs measured using high volume and passive air samplers. The smaller gradient for the experimental soils was due to kinetic limitations of PAH accumulation and the relatively short deployment period of approximately 165 days. Mean effective deposition velocities (gas+particle) for the full range of PAHs for the experimental soils at the urban, suburban, and the rural sites were 2, 31 and 26 cm s(-1), respectively. These were incorporated into a dynamic model that was used to assess the long-term uptake of PAHs in forest soils. Model results indicate that lower molecular weight PAHs may achieve equilibrium and become involved in soil-air exchange whereas higher molecular weight PAHs are accumulated for much longer time periods.     

The role of citric acid on the phytoremediation of heavy metal contaminated soil

Adsorption and hydroponics experiments were conducted to study the role of citric acid on the phytoremediation of heavy metal contaminated soil. The results show that addition of citric acid decreased the adsorption of both lead and cadmium, such an effect was bigger for cadmium than for lead. The decrease in the adsorption of Pb and Cd was mainly due to a decrease of pH in the presence of citric acid. The presence of citric acid could alleviate the toxicity of Pb and Cd to radish, and stimulate their transportation from root to shoot. The studies of heavy metal forms using sequential extraction demonstrated that lead was mainly existed as FHAC (a lower bioavailable form) in the root, while F(HCl) was the dominant form in the leaf. The addition of citric acid to the soil changed the concentration and relative abundance of all the forms. The detoxifying effect of citric acid to Pb in shoots might result from the transformation of higher toxic forms into lower toxic forms. Cadmium was mainly present as F(NaCl), therefore, it had higher toxicity than lead. The addition of citric acid increased the abundance of F(H2O) + F(NaCl), indicating that citric acid treatment could transform cadmium into more transportable forms.     

Enantiomer fractions of chiral organochlorine pesticides and polychlorinated biphenyls in standard and certified reference materials

Enantiomeric ratios (ERs) and enantiomeric fractions (EFs) of a number of chiral organochlorine pesticides and PCB atropisomers were measured by chiral gas chromatography/mass spectrometry (GC/MS) in five standard (SRM) and certified (CRM) reference materials: SRM 1588a (organics in cod liver oil), SRM 1945 (organics in whale blubber), Marine Mammal Quality Assurance Exercise Control Material IV (NIST IV, organics in whale blubber), CRM trout, and CRM EC-5 (sediment). Target analytes were cis- and trans-chlordane, heptachlor exo-epoxide, oxychlordane, U82, MC5, MC6, MC7, o,p^′-DDT, and PCB congeners 91, 95, 136, 149, 174, 176, and 183. Measured ERs and EFs are in close agreement with the few literature values reported for some of these analytes in SRMs and CRMs. Chiral PCB ERs and EFs measured by one-dimensional chiral GC/MS were similar to values measured using multidimensional chiral GC/MS. Non-racemic chiral compositions are in agreement with known uptake and biotransformation in the respective environmental matrices. These values should aid in the quality assurance/quality control methodologies for chiral environmental chemistry using standardized reference materials.     

Growth and nutrient uptake of arbuscular mycorrhizal maize in different depths of soil overlying coal fly ash

Application of topsoil over phytotoxic mine wastes is often practised to establish perennial plant communities on minespoil areas. In China, population pressure encourages attempts to remediate such areas by growing arable crop plants, but efforts to establish agricultural crops often fail. We report an outdoor pot experiment that compared the effects of two arbuscular mycorrhizal (AM) fungi, Glomus mosseae (Nicol. and Gerd.) Gerdemann and Trappe and G. versiforme (Karsten) Berch, on the growth and nutrient uptake of maize (Zea mays L.) grown in different depths of soil layer overlying coal fly ash. Colonization by both AM fungi increased plant growth compared with non-mycorrhizal controls, with G. mosseae giving higher yields of maize than G. versiforme at the same depths of soil. Increasing soil depth led to increased plant yields. Mycorrhizal plants absorbed more nutrients than non-mycorrhizal controls, and translocated less Na to the shoots, perhaps protecting the plants from excessive Na accumulation. These preliminary results indicate that arbuscular mycorrhizas may make a substantial contribution to successful crop establishment in soils overlying areas of coal fly ash.     

Use of cattails in treating wastewater from a Pb/Zn mine

This article describes the use of a combined treatment system, which includes an aquatic treatment pond withTypha latifolia Linn. (Typhaceae) as the dominant species and a stabilization pond, to treat the wastewater from a Pn/Zn mine at Shaoguan, Guangdong Province, China. In 1983, it was noted thatT. latifolia bloomed in areas affected by the wastewater emitted from the mine, hence a combined purification system was subsequently built. The influent contained high levels of total suspended solids (4635 mg/liter), chemical oxygen demand (14.5 mg/liter) as well as Pb (1.6 mg/liter) and Zn (1.9 mg/liter). The results of the effluent after treatment showed that the total suspended solids, chemical oxygen demand, Pb, and Zn had been reduced by 99%, 55%, 95%, and 80% respectively. The results of plant tissue analysis indicled thatT. latifolia assimilated significant amounts of Pb and Zn, especially in the root portion. During 1986 several species of algae and fish were present in the pond, usually with a higher density in areas containing lower metal concentrations in the water. Paper was presented in part at the conference “The Use of Constructed Wetlands in Water Pollution Control” held 24–28 September 1990, Cambridge, UK.     

东南亚沿海生态旅游的趋势

当地居民的生活需求、保护生物多样性的必要性和娱乐旅游使得东南亚海岸资源压力不断增 加 .在这种情况下 , 沿海生态旅游会扮演越来越重要的角色 .这篇文章考察了泰国、菲律宾、 印度尼西亚、马来西亚和越南的沿海生态旅游的开发 .     

Advances in photocatalytic disinfection of bacteria: Development of photocatalysts and mechanisms

Photocatalysis has attracted worldwide attention due to its potential in solar energy conversion. As a “green” advanced oxidation technology, it has been extensively used for water disinfection and wastewater treatment. This article provides a review of the recent progress in solar energy-induced photocatalytic disinfection of bacteria, focusing on the development of highly efficient photocatalysts and their underlying mechanisms in bacterial inactivation. The photocatalysts are classified into TiO₂-based and non-TiO₂-based systems, as TiO₂ is the most investigated photocatalyst. The synthesis methods, modification strategies, bacterial disinfection activities and mechanisms of different types of photocatalysts are reviewed in detail. Emphasis is given to the modified TiO₂, including noble metal deposition, non-metal doping, dye sensitization and composite TiO₂, along with typical non-TiO₂-based photocatalysts for bacterial disinfection, including metal oxides, sulfides, bismuth metallates, graphene-based photocatalysts, carbon nitride-based photocatalysts and natural photocatalysts. A simple and versatile methodology by using a partition system combined with scavenging study is introduced to study the photocatalytic disinfection mechanisms in different photocatalytic systems. This review summarizes the current state of the work on photocatalytic disinfection of bacteria, and is expected to offer useful insights for the future development in the field.