Fluctuations of exposure rate at regional radiation monitoring stations in Korea

Based on hourly means of exposure rate between August 2000 and July 2001 at nine Regional Radiation Monitoring Stations (RRMS) in Korea, we analyzed spatio-temporal characteristics of exposure rate. The mean and fluctuations of exposure rates were 99 and 3.8 nGy h(-1), respectively. The hourly exposure rate over 9 RRMS indicated a diurnal pattern with the exposure rates reaching a maximum between 5:00 and 8:00 a.m. in the early morning and a broad minimum between 4:00 and 10:00 p.m. in the afternoon. The fluctuations of exposure rate in the inland areas were less than 3.2 nGy h(-1), and those of exposure rate in coastal areas were larger than 3.9 nGy h(-1). The frequency distribution of exposure rates had one peak around the mean and was to be skewed to the right or positively skewed and its tails were fatter than those of a normal distribution. The interrelations of exposure rates at each station generally decreased with the distance between the stations. Empirical orthogonal function (EOF) analysis showed that almost all (99.9%) of exposure rate fluctuations were described by simultaneous variations. The spatial distribution of the first EOF modes of actual, low-pass (periods longer than one month) and high-pass (periods shorter than one month) exposure rate series were similar to each other.     

Experimental determination of sorption in fractured flow systems

Fracture "skins" are alteration zones on fracture surfaces created by a variety of biological, chemical, and physical processes. Skins increase surface area, where sorption occurs, compared to the unaltered rock matrix. This study examines the sorption of organic solutes on altered fracture surfaces in an experimental fracture-flow apparatus. Fracture skins containing abundant metal oxides, clays, and organic material from the Breathitt Formation (Kentucky, USA) were collected in a manner such that skin surface integrity was maintained. The samples were reassembled in the lab in a flow-through apparatus that simulated approximately 2.7 m of a linear fracture "conduit." A dual-tracer injection scheme was utilized with the sorbing or reactive tracer compared to a non-reactive tracer (chloride) injected simultaneously. Sorption was assessed from the ratio of the first temporal moments of the breakthrough curves and from the loss of reactive tracer mass and evaluated as a function of flow velocity and solute type. The breakthrough curves suggest dual-flow regimes in the fracture with both sorbing and non-sorbing flow fields. Significant sorption occurs for the reactive components, and sorption increased with decreasing flow rate and decreasing compound solubility. Based on moment analysis, however, there was little retardation of the center of solute mass. These data suggest that non-equilibrium sorption processes dominate and that slow desorption and boundary layer diffusion cause extensive tailing in the breakthrough curves.     

Removal of ammonia by biofilters: a study with flow-modified system and kinetics

The characteristics of ammonia removal by two types of biofilter (a standard biofilter with vertical gas flow and a modified biofilter with horizontal gas flow) were investigated. A mixture of organic materials such as compost, bark, and peat was used as the biofilter media based on the small-scale column test for media selection. Complete removal capacity, defined as the maximum inlet load of ammonia that was completely removed, was obtained. The modified biofilter showed complete removal up to 1.0 g N/kg dry material/day. However, the removal capacity of the standard biofilter started to deviate from complete removal around 0.4 g N/kg dry material/day, indicating that the modified biofilter system has higher removal efficiency than the standard upflow one. In kinetic analysis of the biological removal of ammonia in each biofilter system, the maximum removal rate, Vm, was 0.93 g N/kg dry material/day and the saturation constant, Ks, was 32.55 ppm in the standard biofilter. On the other hand, the values of Vm and Ks were 1.66 g N/kg dry material/day and 74.25 ppm, respectively, in the modified biofilter system.     

Effect of soil texture on surfactant-based remediation of hydrophobic organic-contaminated soil

Surfactants may be used in remediation of subsoil and aquifer contaminated with hydrophobic compounds. The objectives of this study were to examine the effect of soil texture on hydrophobic organic contaminant (HOC; toluene, or 1,2,4-trichlorobenzene [TCB]) removal from six soils and to evaluate the optimal composition of soil texture for maximum HOC removal using aqueous surfactant solution. Selected surfactants were 4% (vol/vol) sodium diphenyl oxide disulfonate (DOSL) and 4% (wt/vol) sodium lauryl sulfate (LS). Toluene and TCB were selected as the lighter-than-water nonaqueous phase liquid (LNAPL) and denser-than-water nonaqueous phase liquid (DNAPL) model substances, respectively. Soil types used for this study were Ottawa sand and five Iowa soils (Fruitfield, Keomah, Crippin, Webster, and Galvar). The greatest recovery of toluene and TCB in batch tests was 73% and 84%, respectively, which was obtained with DOSL surfactant in Ottawa sand. The toluene removal of 95% in column tests has been achieved in the Ottawa sand and three Iowa soils (Fruitfield, Keomah, Crippin) with DOSL after effluent volume of 3750 ml (about 32 pore volume) passed. TCB removal of 98% in column tests has been achieved in Ottawa sand and three Iowa soils (Fruitfield, Keomah, Crippin) with DOSL after effluent volume of 2500 ml (about 21 pore volume) passed. These results were related with soil texture (clay content 30%), clay mineralogy (kaolinite and smectite), as a function of transported pore volume.     

Charge reduction on polypropylene granules and suppression of incendiary electrostatic discharges by using a novel AC electrostatic ionizer

As a method to prevent or mitigate electrostatic charge and/or discharges, we have developed a novel AC electrostatic ionizer. In this study, we evaluated experimentally the practical version of the novel AC electrostatic ionizer with a modeling test system and a pneumatic powder transport facility. In addition, electrostatic discharges generated inside a silo while loading polypropylene (PP, 3 mm) granules were observed visually with/without the novel AC ionizer. The specific charge was clearly decreased with the novel AC electrostatic ionizer. The specific charge obtained with the four arranged AC electrostatic ionizers used was approximately one eighth of that without the AC ionizer. The incendiary bulk surface discharges completely died out inside the silo by using the four arranged ionizers.     

Treatment of Dichloromethane Using Gliding Arc Plasma

Decomposition of dichloromethane (CH₂Cl₂) using a gliding plasma was examined and reported in this paper. The effects of initial concentrations of CH₂Cl₂, total gas flow rates, and input frequency have been studied to evaluate the performance of gliding arc on CH₂Cl₂ decomposition. Using atmospheric pressure air as the carrier gas, experimental results indicate that the maximum conversion of CH₂Cl₂ was 95.1% at a total gas flow rate of 180 L/hr containing 1% by volume of CH₂Cl₂. The reaction occurred at an exothermic condition and gaseous products are dominated by CO, CHCl₃, and Cl₂. CO₂ and CCl₄ are also detected in the product stream in small amounts. The conversion of CH₂Cl₂ increases with the increasing applied voltage and decreasing total gas flow rate.     

A New Flood Index for Use in Evaluation of Local Flood Severity: A Case Study of Small Ungauged Catchments in Korea1

Ahn, Jae Hyun and Hyun Il Choi, 2013. A New Flood Index for Use in Evaluation of Local Flood Severity: A Case Study of Small Ungauged Catchments in Korea. Journal of the American Water Resources Association (JAWRA) 49(1): 1‐14. DOI: 10.1111/jawr.12025 Abstract: The aim of this article is to develop a new index measuring the severity of floods in small ungauged catchments for initial local flood information by the regression analysis between the new flooding index and rainfall patterns. Although a rapid local flood caused by heavy storm in a short period of time is now one of common natural disasters worldwide, such a sudden and violent hydrologic event is difficult to forecast. As local flooding rises rapidly with little or no advance warning, the key to local flood forecasting is to quickly identify when and where local flooding above a threshold is likely to occur. The new flooding index to characterize local floods is measured by the three normalized relative severity factors for the flood magnitude ratio, the rising curve gradient, and the flooding duration time, quantifying characteristics of flood runoff hydrographs. The new flooding index implemented for the two selected small ungauged catchments in the Korean Peninsula shows a very high correlation with logarithm of the 2‐h maximum rainfall depth. This study proposes 30 mm of rainfall in a 2‐h period as a basin‐specific guidance of precaution for the incipient local flooding in the two study catchments. It is expected that the best‐fit regression equation between the new flooding index and a certain rainfall rate can provide preliminary observations, the flood threshold, and severity information, for use in a local flood alert system in small ungauged catchments. Editor's note: This paper is part of a featured series on Korean Hydrology. The series addresses the need for a new paradigm of river and watershed management for Korea due to climate and land use changes.     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.     

Monitoring of soil biochemical quality parameters under greenhouse spinach cultivation through animal waste recycling

Under the intensive agricultural system, direct application of animal slurries to soils can provide a sustainable disposal of these wastes by inducing positive changes in soil quality and fertility. However, how animal wastes quantitatively affect the key nutrients (C, N, P and S) transforming soil enzymes is not clearly known. A greenhouse spinach cultivation study demonstrated that pig slurry, either in raw (RS) or processed (aerobically aged) (PS) form, significantly (p?β-glucosidase (23–39%), urease (59–103%), nitrate reductase (73–103%) and dehydrogenase (27–72%)) and microbial growth in soil as compared to the unamended control. However, it did not significantly (p?>?.05) alter the aryl sulphatase enzyme activity. Slurry applications also significantly improved the macro (N, P and K) and micronutrients (Cu, Mn, Zn and Fe) uptake by spinach plant and hence the yield (2.9–3.38 times higher than control). Similarly, compared to chemical fertilisers the application of pig slurries improved soil biological and biochemical parameters as well as plant nutrients uptake. This study demonstrated the closing of global energy and nutrient cycles through land application of animal wastes without compromising the crop yield.     

Inhibition of pyrite oxidation by surface coating: a long-term field study

Pyrite and other iron sulfides are readily oxidized by dissolved oxygen in aqueous phase, producing acidity and Fe²⁺, which causes significant environmental problems. Applications of surface coating agents (Na₂SiO₃ and KH₂PO₄) were conducted at Boeun (Chungbuk, South Korea) outcrop site, and their efficiencies to inhibit the oxidation of sulfide minerals were monitored for a long-term period (449 days). The rock sample showed positive Net Acid Production Potential (NAPP = 20.23) and low Net Acid Generation pH (NAGpH = 2.42) values, suggesting that the rock sample was categorized in the potential acid-forming group. For the monitored time period (449 days), field study results showed that the application of Na₂SiO₃ effectively inhibited the pyrite oxidation as compared to KH₂PO₄. Na₂SiO₃ as a surface coating agent maintained pH 5–6 and reduced oxidation of pyrite surface up to 99.95 and 97.70 % indicated by Fe²⁺ and SO₄ ^2? release, respectively. The scanning electron microscope and energy-dispersive X-ray spectrometer analysis indicated that the morphology of rock surface was completely changed attributable to formation of iron silicate coating. The experimental results suggested that the treatment with Na₂SiO₃ was highly effective and it might be applicable on field for inhibition of iron sulfide oxidation.