Charge reduction on polypropylene granules and suppression of incendiary electrostatic discharges by using a novel AC electrostatic ionizer

As a method to prevent or mitigate electrostatic charge and/or discharges, we have developed a novel AC electrostatic ionizer. In this study, we evaluated experimentally the practical version of the novel AC electrostatic ionizer with a modeling test system and a pneumatic powder transport facility. In addition, electrostatic discharges generated inside a silo while loading polypropylene (PP, 3 mm) granules were observed visually with/without the novel AC ionizer. The specific charge was clearly decreased with the novel AC electrostatic ionizer. The specific charge obtained with the four arranged AC electrostatic ionizers used was approximately one eighth of that without the AC ionizer. The incendiary bulk surface discharges completely died out inside the silo by using the four arranged ionizers.     

A New Flood Index for Use in Evaluation of Local Flood Severity: A Case Study of Small Ungauged Catchments in Korea1

Ahn, Jae Hyun and Hyun Il Choi, 2013. A New Flood Index for Use in Evaluation of Local Flood Severity: A Case Study of Small Ungauged Catchments in Korea. Journal of the American Water Resources Association (JAWRA) 49(1): 1‐14. DOI: 10.1111/jawr.12025 Abstract: The aim of this article is to develop a new index measuring the severity of floods in small ungauged catchments for initial local flood information by the regression analysis between the new flooding index and rainfall patterns. Although a rapid local flood caused by heavy storm in a short period of time is now one of common natural disasters worldwide, such a sudden and violent hydrologic event is difficult to forecast. As local flooding rises rapidly with little or no advance warning, the key to local flood forecasting is to quickly identify when and where local flooding above a threshold is likely to occur. The new flooding index to characterize local floods is measured by the three normalized relative severity factors for the flood magnitude ratio, the rising curve gradient, and the flooding duration time, quantifying characteristics of flood runoff hydrographs. The new flooding index implemented for the two selected small ungauged catchments in the Korean Peninsula shows a very high correlation with logarithm of the 2‐h maximum rainfall depth. This study proposes 30 mm of rainfall in a 2‐h period as a basin‐specific guidance of precaution for the incipient local flooding in the two study catchments. It is expected that the best‐fit regression equation between the new flooding index and a certain rainfall rate can provide preliminary observations, the flood threshold, and severity information, for use in a local flood alert system in small ungauged catchments. Editor's note: This paper is part of a featured series on Korean Hydrology. The series addresses the need for a new paradigm of river and watershed management for Korea due to climate and land use changes.     

Sudden high concentration of TSP affected by atmospheric boundary layer in Seoul metropolitan area during duststorm period

Hourly concentrations of TSP, PM(10), PM(2.5) near the surface at Seoul city were examined from March 20 to March 25, 2001 (duststorm event) in order to investigate the effect of a duststorm generated in China on the local aerosol concentration in Korea, The ratios of fine to coarse particles such as TSP to PM(10), TSP to PM(2.5) and PM(10)-PM(2.5) to PM(2.5) showed that a great amount of dust transported from the origin of the duststorm was remarkable with a maximum ratio of 9.77 between TSP and PM(2.5). Back trajectories every 6 h showed the movement of dust particles in the lower atmosphere near 500 m to 1500 m (atmospheric boundary layer), which implied transport from Baotou in inner Mongolia of northern China to the direction of Seoul city in Korea and then the back trajectories passed near the southern border of Mongolia and Baotou through Zengzhou in the midlevels (3000 m) and low levels (500 m) of China, finally reaching Seoul city. So, the TSP concentration at Seoul city was partially influenced by the duststorm, under the prevailing westerly wind and the transported aerosols could influence high concentrations of pollutants of TSP, PM(10) and PM(2.5) in Seoul. The sudden high concentrations of TSP and PM(10) were found for a few hours, especially at 1500 to 1800 LST, March 22. At 1200 LST, before the passage of a cold front through the Korean peninsula, the convective boundary layer (CBL) near Seoul was not shallow, but at 1500 LST, under the frontal passage, the CBL was remarkably thinner (less than 300 m), due to the compression of the boundary layer by the intrusion of cold air. This resulted in the increase of the TSP concentration, even though the mixed layer above maintained almost the same depth. At 1800 LST shortly after the frontal passage, that is, near sunset, the nocturnal cooling of the ground caused air parcels to cool, thereby enhancing the shallower nocturnal surface inversion layer and producing the maximum concentration of TSP of 1388 microg/m(3) near Seoul city.     

Effects of the simultaneous application of potassium and calcium on the soil-to-Chinese cabbage transfer of radiocesium and radiostrontium

Pot experiments were carried out in a greenhouse to investigate how effectively the transfer of radiocesium and radiostrontium from soil to Chinese cabbage could be reduced by applying K and Ca simultaneously to the soil. The sources of these elements were KCl and Ca(OH)(2) at agrochemical grades. Varying dosages of K and Ca were tested for an acid loamy soil treated with a mixed solution of (137)Cs and (85)Sr at two different times - 3 d before sowing and 32 d after sowing. For the pre-sowing deposition, the soil-to-plant transfer of (137)Cs decreased sharply with increasing dosages of K and Ca (K/Ca, g m(-2)) from 4.8/46 up to 22.4/215 but the (85)Sr transfer had the greatest reduction at a dosage of 12.8/123. At this dosage, an about 60% reduction occurred for each radionuclide. Plant growth was inhibited from the dosage of 22.4/215, above which all the plants died young. Both dosages of 4.8/46 and 12.8/123 tested following the growing-time deposition produced around 95% reductions for (137)Cs and 50% reductions for (85)Sr. In the second year after the 12.8/123 applications, the effects for (85)Sr were almost the same as in the first year, whereas those for (137)Cs were diminished slightly for the pre-sowing deposition and markedly for the growing-time deposition. Considerably (K) or slightly (Ca) higher doses than 12.8/123 would be allowable for the maximum TF reductions achievable without a growth inhibition.     

Effect of arsenic species on the growth and arsenic accumulation in <Emphasis Type="Italic">Cucumis sativus</Emphasis>

The effects of arsenic (As) species, such as As(III), As(V) and dimethylarsinic acid (DMA), on the accumulation of As in cucumber (Cucumis sativus), as well as on its growth in a soil mesocosm were evaluated. When Cucumis sativus was cultivated in soils contaminated with 20 and 50 mg/kg of As(III), As(V) or DMA for 40 days, the growth was markedly inhibited by the inorganic As (As(III) and As(V)) rather than the organic As (DMA). Irrespective of the As species, the As concentrations accumulated in Cucumis sativus increased with increasing As concentration in the soil. The As bioaccumulation factors from soil into the tissue of Cucumis sativus were 17.5–35.4, 29.3–42.7 and 17.6–25.7 for As(III), As(V) and DMA, respectively. In addition, the As translocation factors from the roots to shoots were 0.025–0.031, 0.018–0.032 and 0.014–0.026 for As(III), As(V) and DMA, respectively. In conclusion, Cucumis sativus mainly accumulated As in its roots rather than its shoots and easily accumulated inorganic rather than organic As from the soil into its tissue.     

Distributions of heavy metals in the sediments of South Korean harbors

Mechanisms of natural attenuation of arsenic (As) by wetland plants may be classified by plant uptake and adsorption and/or co-precipitation by iron (oxy)hydroxide formed on the root surface of plants or in rhizosediment. A natural Cattail (Typha spp.) wetland impacted by tailings containing high levels of As from the Myungbong abandoned Au Mine, South Korea was selected, and the practical capability of this wetland to attenuate As was evaluated. The As concentrations in the plant tissues from the study wetland were several-fold higher than those from control wetland. SEM-EDX analyses demonstrated that iron plaques exist on the rhizome surface. Moreover, relatively high As contents bonded with hydrous iron oxides were found in the rhizosediments rather than in the bulk sediments. It was revealed through the leaching and sequential extraction analyses that As existed as more stable forms in the wetland sediment compared with adjacent paddy soil, which is also contaminated with As due to input of mine tailings. The As concentration ratios of extracted solution to sediment/soil represented that the wetland sediment showed significant lower values (10-fold) rather than the paddy soil with indicating high As stability. Also, As in the wetland sediment was predominantly bonded with residual phases on the basis of results from sequential extraction analysis. From these results, it is concluded that transformation of As contaminated agricultural field to wetland environment may be helpful for natural attenuation until active remediation action.     

Particle Surface Hydrophobicity and the Dechlorination of Chloro-Compounds by Iron Sulfides

Halogenated aliphatic compounds (HACs) can be reduced by iron sulfides in aqueous systems. Generally, the thermodynamics and kinetics of dehalogenation reactions are controlled by the mineralogical and particle surface characteristics of the iron sulfide, the composition of the HAC and reaction conditions such as component concentrations, pH and Eh. In this theoretical and experimental investigation of CCl₄ and C₂Cl₆ reduction by FeS and FeS₂, the roles of hydrophobic and hydrophilic sites on the iron sulfides were analyzed. Experimental data obtained through zeta potential measurements, were used along with the Gouy-Chapman model and the simple two-layer surface complexation model to relate iron sulfide surface hydroxyl densities to the degree of HAC dehalogenation. The surface hydroxyl site densities of FeS and FeS₂ were found to be 0.11 sites/nm² and 0.21 sites/nm², respectively. During the dehalogenation reaction process, CCl₄ was found to decrease to its first intermediate product CHCl₃ within the first 20 hours followed by a slower process of conversion to CH₂Cl₂. The results also show that FeS is less hydrated (more hydrophobic) than FeS₂. For CCl₄ and C₂Cl₆, FeS is a better dehalogenator than FeS₂. These results imply that particle surface hydrophobicity is a critical factor in surface-mediated dehalogenation of chlorinated compounds.     

Glass recycling in cement production--an innovative approach

An innovative approach of using waste glass in cement production was proposed and tested in a laboratory and cement production plant. The laboratory characterization of 32 types of glass show that the chemical composition of glass does not vary significantly with its color or origin but depends on its application. The alkali content of glass, a major concern for cement production varies from 0 to 22%. For the glass bottles mainly found in Hong Kong waste glasses, the alkali content (Na2O) ranges from 10 to 19% with an average around 15%. There is no significant change of the SO2 content in the gas exhaust of the rotary kiln when about 1.8 t/h of glass bottles were loaded along with the 280-290 t/h raw materials. The content of NOx, mainly depends on the temperature of the kiln, does not show significant change either. The SO3 content of the clinker is comparable with that obtained without the loading of glass. The alkaline content shows a slight increase but still within three times the standard deviation obtained from the statistical data of the past year. The detailed analysis of the quality of the cement product shows that there is not any significant impact of glass for the feeding rate tested.     

Groundwater contamination and natural attenuation capacity at a petroleum spilled facility in Korea

As a remedial option, the natural attenuation capacity of a petroleum contaminated groundwater at a military facility was examined. Hydrogeological conditions, such as high water level, permeable uppermost layer and frequent heavy rainfall, were favorable to natural attenuation at this site. The changes in the concentrations of electron acceptors and donors, as well as the relevant hydrochemical conditions, indicated the occurrence of aerobic respiration, denitrification, iron reduction, manganese reduction and sulfate reduction. The calculated BTEX expressed biodegradation capacity ranged between 20.52 and 33.67 mg/L, which appeared effective for the reduction of the contaminants levels. The contribution of each electron accepting process to the total biodegradation was in the order: denitrification > iron reduction > sulfate reduction > aerobic respiration > manganese reduction. The BTEX and benzene point attenuation rates were 0.0058-0.0064 and 0.0005-0.0032 day^-1, respectively, and the remediation time was 0.7-1.2 and 2.5-30 years, respectively. The BTEX and benzene bulk attenuation rates were 8.69 × 10^-4 and 1.05 × 10^-3 day^-1, respectively, and the remediation times for BTEX and benzene were 7.2 and 17.5 years, respectively. However, most of the natural attenuation occurring in this site can be attributed to dilution and dispersion. Consequently, the biodegradation and natural attenuation capacities were good enough to lower the contaminants levels, but their rates appeared to be insufficient to reach the remediation goal within a reasonable time frame. Therefore, some active remedial measures would be required.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.