Selective adsorption of phenanthrene dissolved in surfactant solution using activated carbon

Selective adsorption of a hazardous hydrophobic organic compound (HOC) by activated carbon as a means of recovering surfactants after a soil washing process was investigated. As a model system, phenanthrene was selected as a representative HOC and Triton X-100 as a nonionic surfactant. Three activated carbons that differed in size (Darco 20–40 (D20), 12–20 (D12) and 4–12 (D4) mesh sizes) were used in adsorption experiments. Adsorption of surfactant onto activated carbon showed a constant maximum above the critical micelle concentration, which were 0.30, 0.23, 0.15 g g⁻¹ for D20, D12, and D4, respectively. Selectivity for phenanthrene to Triton X-100 was much higher than 1 over a wide range of activated carbon doses (0–6 g l⁻¹) and initial phenanthrene concentrations (10–110 mg l⁻¹). Selectivity generally increased with decreasing particle size, increasing activated carbon dose, and decreasing initial concentration of phenanthrene. The highest selectivity was 74.9, 57.3, and 38.3 for D20, D12, and D4, respectively, at the initial conditions of 10 mg l⁻¹ phenanthrene, 5 g l⁻¹ Triton X-100 and 1 g l⁻¹ activated carbon. In the case of D20 at the same conditions, 86.5% of the initial phenanthrene was removed by sorption and 93.6% of the initial Triton X-100 remained in the solution following the selective adsorption process. The results suggest that the selective adsorption by activated carbon is a good alternative for surfactant recovery in a soil washing process.     

A sensitive and reliable quantification method for Bisphenol A based on modified competitive ELISA method

Bisphenol A (BPA), generally known as bisphenols, has been identified as a potential estrogenic substance. BPA must be conjugated to carrier protein and BSA was commonly used. 4,4-Bis(4-hydroxyphenyl) valeric acid (BHPVA) has a bisphenolic structure and a long carbon chain with a reactive carboxyl group on the end. In this study, BHPVA-BSA was used to produce polyclonal antibody against bisphenolic structure, and a modified competitive ELISA method for quantification of BPA was developed. This system was based on BHPVA-BSA for polyclonal antibody production against bisphenolic structure, and BHPVA-HRP for determination of BPA substituting detection antibody in competitive reaction. Recovery was assessed at 10 different concentrations (2-1000 ng/ml) of BHPVA, and the recovery range was from 96.3% to 107.2%. The variation was from 6.2% to 9.8% for intra assay and from 10.1% to 12.6% for inter assay. The quadratic was used to establish the curve regression. The range was found to be between 2 and 1000 ng/ml. This modified competitive ELISA method has proven to be a very useful tool for quantification of BPA without the unexpected interaction of BSA and anti-BSA polyclonal antibody.     

Assessment of the small modular reactor (SMR) marketing using modified network dynamics-based system dynamics (SD) method

Following the export success of the South Korean small modular reactor (SMR), it has been investigated for the marketing strategy of nuclear power plants (NPPs). The information feedback oriented method for the social-business matters, system dynamics (SD), is applied to the assessment of the marketing strategy in which the forecasting skills are performed. Each element has the Boolean value as 0 or 1 in which the values are selected by the random number generation. If the generated values are higher than the designed value decided by the operator, it is 1. Otherwise, it is 0. The networking based dynamical modeling is discussed. The modification of the linear networking is changed by the SD algorithm where the feedback and multiple connections are added to the original network dynamics theory. This new method has shown the complexity of the marketing strategy, especially for the NPPs.     

Environmental monitoring of the role of phosphate compounds in enhancing immobilization and reducing bioavailability of lead in contaminated soils

Lead is a highly toxic element and forms stable compounds with phosphate, which is commonly used to immobilize Pb in soils. However, few studies have monitored the long-term stability of immobilized Pb, which is a critical factor in determining the effectiveness of the in situ stabilization technique. Both soluble and insoluble phosphate compounds were tested for Pb immobilization, and its subsequent mobility and bioavailability in a contaminated soil from a shooting range. Adding tricalcium phosphate, hydroxyapatite, rock phosphate and potassium dihydrogen phosphate reduced the concentration of ammonium-nitrate-extractable Pb in the contaminated soil by 78.6%, 48.3%, 40.5% and 80.1%, respectively. Insoluble phosphate amendments significantly reduced leached Pb concentration from the column while soluble potassium dihydrogen phosphate compound increased P and Pb concentrations in the leachate. Rock phosphate reduced Pb accumulation in earthworms by 21.9% compared to earthworms in the control treatment. The long-term stability of immobilized Pb was evaluated after 2 years' incubation of the contaminated soil with rock phosphate or soluble phosphate compounds. Bioavailable Pb concentration as measured by simple bioavailability extraction test (SBET) showed the long-term stability of immobilized Pb by P amendments. Therefore, Pb immobilization using phosphate compounds is an effective remediation technique for Pb-contaminated soils.     

Protective effect of overlying geosynthetic on geomembrane liner observed from landfill field tests and inclined board laboratory experiments.

Geosynthetic liner systems are generally installed in landfill sites to prevent toxic leachate from escaping into the adjoining environment by utilizing their impervious characteristics. Therefore, it is important to protect the geomembrane from being damaged or destroyed during all phases of landfilling, namely landfill construction, waste tipping and landfill closure. This paper presents firstly the observed performance of a geomembrane liner from a landfill site where the geomembrane liner was installed on the slopes of a Korean landfill; and secondly the results of an inclined board laboratory test. Two types of experiments were conducted to identify the protecting effect of the overlaying geosynthetic on the geomembrane liners. At a testing landfill site, the slope consisted of three different sub-inclines and two 2-m-wide intermediate levels. The sub-inclines were each 8 m in vertical height and their angle of inclination was 1: 1.5 (vertical: horizontal). The reported observations were made for a time period of approximately 1 year, until the landfill was filled with wastes to the top of the uppermost slope. In addition, inclined board laboratory tests were carried out. During the inclined board test, a base table is inclined slowly and steadily until the block located on the base table starts to slide, when the tension and displacements of two geosynthetics, namely the geomembrane liner and protecting geotextile, are measured. In conclusion, test results showed that the down-drag force generated by waste accumulation and sliding of upper material was to a large extent dissipated through the elongation of the protecting geosynthetic overlying the geomembrane and thus was not transferred to the geomembrane. Unless the protecting geosynthetic undergoes structural failure, this stress relaxation phenomenon continues to occur so that the magnitude of tensile force to be applied on the geomembrane remains marginal.     

Safety assessment for accident of cooling loop failure (ACLF) in lunar nuclear power reactor (LNPR)

The safety assessment of an accident in the lunar base power plant is investigated for the stability of the operation. The lunar surface reactor is modeled for this study. The accident of cooling loop failure (ACLF) is one of the important scenarios for the virtual case in the moon nuclear power plant (NPP). The newly designed lunar nuclear power reactor (LNPR) is suggested for the commercial purpose. The system dynamics (SD) is used for the simulation of the safety assessment. The cyclic variation of the lunar surface temperature can affect to the physical situation of the coolant, which is expressed by the time step. The result shows the performance possibility of the long term cooling increases slightly in the short period of the time step. The dynamical simulation of the lunar environment is performed for the conceptual design of the NPP.     

Vertical distribution and characteristics of soil humic substances affecting radionuclide distribution

The humic substances extracted from different soil depths are separated into humic (HA) and fulvic (FA) acids, and characterized for their chemical composition, proton exchange capacity, spectroscopic characteristics and binding properties to the europium ion. The chemical and spectroscopic results show that FA compared to HA has a relatively high O/C ratio, high acidic functional group contents and low aromatic contents. The synchronous fluorescence spectroscopic results show that the stability constant (K) of the soil humic substances with Eu(III) ion tends to increase as the soil depth becomes deeper, and HA has a slightly stronger binding ability than FA. The measured total site concentrations (C(L)) reveal that Eu(III) ion is loaded onto HA by 62-77% of the total acid sites, but FA is only approximately 50% covered by Eu(III) ion. Information could be useful in understanding the migration of radionuclides in soil layer.     

REGIONALIZATION AND PREDICTION OF ANNUAL FLOODS IN THE FRASER RIVER CATCHMENT,BRITISH COLUMBIA1

A method of predicting probability distributions of annual floods is presented and is applied to the Fraser River catchment of British Columbia. The Gumbel distribution is found to adequately describe the observed flood frequency data. Using the estimated Gumbel parameters, discriminant analysis is performed to separate basins into flood regions. Within each region, regression analysis is used to relate physiographic and climatic variables to the means and standard deviations of the annual flood series. The regression equations are applied to four test basins and the results indicate that the method is suitable for an estimation of annual floods.     

Use of waste iron metal for removal of Cr(VI) from water

Cr(VI) removal from water was evaluated using waste iron particles in batch experimental mode. The reaction rates were inversely proportional to the initial Cr(VI) concentrations, and the reaction rates of Cr(VI) removal with the waste iron metal were faster than those with Peerless iron, a commercial zero-valent iron. The loss in iron reactivity due to the oxidation, from Fe(0) to Fe(II), ultimately to Fe(III), could be recovered by adding iron-reducing consortium (IRC) to the oxidized iron. Bacterial reduction of Cr(VI) also helped to decrease the aqueous concentration of Cr(VI), but the reduction of oxidized iron by IRC and the consequent reduction of Cr(VI) to Cr(III) by the reduced iron was more significant. Thus, reusing waste iron metal for Cr(VI) removal can reduce the cost of reactive media. Furthermore, the addition of IRC to the waste iron metal can accelerate the removal rate of Cr(VI), and can recover the reactivity of irons which were oxidized by Cr(VI).