居室放射性

本文介绍了放射性的来源,讨论了室内γ射线和氡及其子体,计算了相关的年剂量当量     

广元飞播造林成效与流域生态环境效益研究

运用川北广元历年飞播成效调查以及固定标准地观测的结果,结合笔者从事飞播造林技术与管理工作的经验,得出：飞播造林是速度快、省劳力、投资少、成本低、效益高的造林方式,推广飞机播种造林是绿化川北山地,迅速治理流域生态环境和实现山区经济可持续发展的有效措施     

由震洪相关回顾性预测1870年长江特大洪水

１８７０ 年长江特大洪水是多因叠加和强化的结果, 因之要预测它也要从各方面去研究。如特大洪水前的先行降雨和洪水所反映的大气环流状况及太阳活动情况等。本文把１９３１ 年、１９５４年、１９９１ 年长江大洪水前一年内缅甸北部有７ 级以上大震及１９９８ 年长江大洪前一年内缅北有６级左右震群集中活动的相关指标移用于１８７０ 年长江特大洪水前, 发现其前一年, 即１８６９ 年缅北亦有７ 级以上大震发生。震洪相关的物理机制是与地震活动有关的地下放气使孟加拉湾向长江流域输送的水气更多,如遇北方冷气团南下则降大雨致洪。另外,１８７０ 年长江洪水之所以比１９３１ 年、１９５４ 年、１９９１ 年和１９９８ 年长江洪水还大, 我们认为１８７０ 年４ 月１１ 日在长江上游山区有７ 级以上大震发生, 且震前有大雪发生, 是叠加在前述致洪因素上的另一因素。     

通才式安全工程专业课程设置的探讨

根据安全工程专业所处的学科结构体系 ,讨论了通才式安全工程专业高等教育课程设置所考虑的因素。提出了通才式安全工程专业高等教育课程的设置思想、专业基础课和主干课的学时比以及实践与理论相结合的实习方法。     

Characteristics of bricks made from waste steel slag

The characteristics of bricks made from steel slag were investigated in this research. Slag addition was shown to reduce the required firing temperature. When the firing temperature was greater than 1050 degrees C and the slag addition less than 10%, the bricks met ROC national standard CNS 3319 third-class brick for builders. The percentage of slag increased as the quartz and kaolin decreased in the sintered samples while the magnesium aluminum silicate and calcium silicate increased. There were no new crystal phases observed in these samples.     

Interactions of chlorpyrifos with colloidal materials in aqueous systems

An understanding of sorptive processes is key to describing the fate of chlorpyrifos [O,O-diethyl-O-(3, 5, 6-trichloro-2-pyridyl) phosphorothioate] in aquatic environments. The objectives of this study were to evaluate isotherms for adsorption and desorption of chlorpyrifos on colloidal materials and to advance understanding of interaction mechanisms between chlorpyrifos and colloidal materials. Six Ca-saturated reference smectites, one Ca-saturated humic acid (Ca-humate), and one suspended sediment sample, collected from the Upper Cedar River, Iowa, were studied. A batch equilibration technique was employed to quantify adsorption and desorption isotherms for chlorpyrifos over the 0 to 100 microg L(-1) concentration range in a 0.01 M CaCl(2) background. Large differences in sorption affinity and variation in desorption hysteresis were found among the smectites. Neither chlorpyrifos adsorption nor its desorption were correlated with cation exchange capacity, surface area, or surface charge density of the smectites. The evidence suggests that physical interaction between chlorpyrifos and smectites is the dominant mechanism for adsorption of chlorpyrifos in aqueous systems. Chlorpyrifos was very strongly sorbed on Ca-humate and was not desorbed from the Ca-humate back into the aqueous solution. Chlorpyrifos was moderately sorbed on river sediment, and a large adsorption-desorption hysteresis was also found. The study implies that the nature of both organic and inorganic materials in suspended sediment can influence the adsorption-desorption behavior of chlorpyrifos in aqueous systems.     

Picloram and napropamide sorption as affected by polymer addition and salt concentration

Polymer application to soil is a growing practice to improve soil physical properties and reduce soil erosion. Polymer addition can potentially influence herbicide and pesticide sorption in soil. The one-point distribution coefficient Kd values of two herbicides in the absence and presence of each of 10 polymers (7 polyacrylamides and 3 polysaccharides) were determined by the batch equilibrium method. The results showed that nonionic napropamide [2-(alpha-naphthoxy)-N,N-diethyl propionamide] sorption was essentially unaffected by the presence of any of the polymers. The influence of polymers on anionic picloram (4-amino-3,5,6-trichloropicolinic acid) sorption depends on the charge characteristics of polymers and salt concentrations in the solution. Electrostatic interaction and competition for sorption sites are two primary underlying mechanisms for the polymer influence. At low salt concentration, the increased picloram sorption in the presence of both cationic and anionic polymers was attributed to different electrostatic interactions and polymer partitioning between soil and solution phases. At high salt levels, the presence of polymers had either no influence or a slightly negative influence on the picloram sorption, which was attributed to competition for sorption sites. In field conditions, it is more likely that polymers have no or a slightly negative influence on herbicide sorption due to the presence of salts.     

Hydroxyl radical scavenging role of chloride and bicarbonate ions in the H2O2/UV process

Simultaneous effect of inorganic anions, such as chloride and bicarbonate ions, on the scavenging of hydroxyl radicals (HO*) in the H2O2/UV process is the focus of this paper. The model compound of n-chlorobutane (BuCl) was used as the probe of HO*. By changing the pH conditions (2-9) and the concentrations of NaCl (0.25-2500 mM) and NaHCO3 (25 mM), the variation of HO* concentrations and the rate of H2O2 decomposition were compared. In general, the BuCl and H2O2 follow closely the first-order reaction within the first 10 and 40 min, respectively. In the presence of chloride alone at the pH range of 2-6, the HO* concentration in the reaction mixture increases with the increase of pH, and the HO* concentration at pH = 6 is 100 times of that at pH = 2. Including bicarbonate species in the solution, the peak HO* concentration was found at a certain pH, which shifts from 4, 5, to 5-7, as the molar ratios of chloride/bicarbonate species increase from 1 to 100. In addition, without bicarbonate species HO* concentration decreases significantly with increasing chloride concentration but remained rather unchanged beyond 1250 mM. In contrast, the HO* scavenging in the presence of bicarbonate species became relatively significant only when the chloride concentration reached beyond 250 mM. Throughout all experiments of different water quality conditions, the H2O2 decomposition rate remains rather unchanged.     

Effects of sample storage on biosolids compost stability and maturity evaluation

Compost stability and maturity are important parameters of compost quality. To date, nearly all compost characterization has been performed using samples freshly collected because sample storage can affect compost stability and maturity evaluation. However, sample preservation is sometimes necessary, especially for scientific research purposes. There is little information available on the effects of sample storage on compost stability and maturity. Samples of biosolids compost with different levels of stability and maturity were collected from four compost facilities in Florida (referred to as Register, Winslow, Sunset, and Meadow). Comparisons of CO2 evolution, seed germination rate, and water-soluble organic carbon (WSOC) were made between fresh samples with short storage at 4 degrees C for less than 1 wk and air-dried or frozen compost samples stored for 1 yr. The effects of storage (air-dry or frozen) on the measured parameters depended on compost stability and maturity and on the compost material source. Frozen storage reduced the peak CO2 evolution of Register samples by 12 to 29%, while accumulated CO2 evolution was reduced by 43 to 64% and 110 to 277% with air-dry and frozen storage, respectively. The storage effect on CO2 evolution with more stable compost was inconsistent. Storage did not affect compost phytotoxicity, except for samples from the Sunset facility. Air-drying reduced the WSOC by up to 35%, and freezing increased it by up to 34%, while both storage methods had no significant effect on samples of low WSOC. Despite all these variations, WSOC had a significant and consistent relation to CO2 evolution and seed germination rates with R2 of 0.78 and 0.57, respectively, regardless of storage methods.     

Simulation of cooling-water discharges from power plants

Accurate simulation of the temperature distribution in a cooling lake or reservoir is often required for feasibility studies of engineering options that increase the cooling capacity of the waterbody. A three-dimensional hydrodynamic and temperature model has been developed and applied to several cooling lakes in the south-eastern United States. In this paper, the details of the modeling system are presented, along with the application to the Flint Creek Lake.