Application of improved seasonal GM(1,1) model based on HP filter for runoff prediction in Xiangjiang River

Environmental Science and Pollution Research - Runoff forecasting is essential for the reasonable use of regional water resources, flood prevention, and mitigation, as well as the development of...     

DSCAM-AS1 promotes cervical carcinoma cell proliferation and invasion via sponging miR-338-3p

Environmental Science and Pollution Research - Deregulated lncRNA DSCAM-AS1 expression was found in several tumors. However, mechanism and functional role of DSCAM-AS1 in cervical carcinoma remain...     

Abatement of sulfur hexafluoride emissions from the semiconductor manufacturing process by atmospheric-pressure plasmas

Sulfur hexafluoride (SF6) is an important gas for plasma etching processes in the semiconductor industry. SF6 intensely absorbs infrared radiation and, consequently, aggravates global warming. This study investigates SF6 abatement by nonthermal plasma technologies under atmospheric pressure. Two kinds of nonthermal plasma processes--dielectric barrier discharge (DBD) and combined plasma catalysis (CPC)--were employed and evaluated. Experimental results indicated that as much as 91% of SF6 was removed with DBDs at 20 kV of applied voltage and 150 Hz of discharge frequency for the gas stream containing 300 ppm SF6, 12% oxygen (O2), and 40% argon (Ar), with nitrogen (N2) as the carrier gas. Four additives, including Ar, O2, ethylene (C2H4), and H2O(g), are effective in enhancing SF6 abatement in the range of conditions studied. DBD achieves a higher SF6 removal efficiency than does CPC at the same operation condition. But CPC achieves a higher electrical energy utilization compared with DBD. However, poisoning of catalysts by sulfur (S)-containing species needs further investigation. SF6 is mainly converted to SOF2, SO2F4, sulfur dioxide (SO2), oxygen difluoride (OF2), and fluoride (F2). They do not cause global warming and can be captured by either wet scrubbing or adsorption. This study indicates that DBD and CPC are feasible control technologies for reducing SF6 emissions.     

Simultaneous removal of nitrogen oxide/nitrogen dioxide/sulfur dioxide from gas streams by combined plasma scrubbing technology

Oxides of nitrogen (NOx) [nitrogen oxide (NO) + nitrogen dioxide (NO2)] and sulfur dioxide (SO2) are removed individually in traditional air pollution control technologies. This study proposes a combined plasma scrubbing (CPS) system for simultaneous removal of SO2 and NOx. CPS consists of a dielectric barrier discharge (DBD) and wet scrubbing in series. DBD is used to generate nonthermal plasmas for converting NO to NO2. The water-soluble NO2 then can be removed by wet scrubbing accompanied with SO2 removal. In this work, CPS was tested with simulated exhausts in the laboratory and with diesel-generator exhausts in the field. Experimental results indicate that DBD is very efficient in converting NO to NO2. More than 90% removal of NO, NOx, and SO2 can be simultaneously achieved with CPS. Both sodium sulfide (Na2S) and sodium sulfite (Na2SO3) scrubbing solutions are good for NO2 and SO2 absorption. Energy efficiencies for NOx and SO2 removal are 17 and 18 g/kWh, respectively. The technical feasibility of CPS for simultaneous removal of NO, NO2, and SO2 from gas streams is successfully demonstrated in this study. However, production of carbon monoxide as a side-product (approximately 100 ppm) is found and should be considered.     

短程硝化的实现、维持与过程控制的研究现状

短程生物脱氮技术目前倍受人们的关注,国内外学者对短程硝化提出了多种实现及维持的控制途径,但仍存在着一些问题。由于活性污泥法中DO,ORP,pH的变化规律从不同角度不同程度地反映了生物脱氮反应的进程,所以用它们作为控制参数就可以对生物脱氮反应进行过程控制。在分析中,通过对国内外短程硝化控制途径的研究现状与发展趋势的分析和总结,针对目前在实现短程硝化及维持短程硝化各种途径中存在的问题,提出了通过在线检测DO,pH,ORP来实现与维持短程硝化的新思路。     

煤气化炉渣研究现状及利用技术展望

煤气化技术的应用是我国能源战略的重要一环,但同时也会产生大量的煤气化炉渣,亟需研究可批量消纳的资源化利用技术。煤炭灰分中各种矿物相在气化炉内会随温度发生变化,通过对该变化的研究和总结,描述了煤炭灰分中各种矿物相在气化炉内的物化反应过程,并指出煤炭灰分对煤气化炉渣的最终形态特点具有决定性的影响;对煤气化炉渣中残碳的组成及其变化特点的研究表明,残碳对煤气化炉渣的最终利用途径具有重要影响;此外,通过分析煤气化炉渣利用技术研究现状,指出建材化利用技术和掺烧循环流化床原料技术是目前的主流途径;最后,展望了煤气化炉渣利用技术的发展方向,并提出了煤气化炉渣用于混凝土和水泥原料以及井下回填的技术途径。     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

The fractionation and geochemical characteristics of rare earth elements measured in ambient size-resolved PM in an integrated iron and steelmaking industry zone

Environmental Science and Pollution Research - Improved understanding of the fractionation and geochemical characteristic of rare earth elements (REEs) from steel plant emissions is important due...     

Combined effects of nitrogen addition and organic matter manipulation on soil respiration in a Chinese pine forest

The response of soil respiration (Rs) to nitrogen (N) addition is one of the uncertainties in modelling ecosystem carbon (C). We reported on a long-term nitrogen (N) addition experiment using urea (CO(NH₂)₂) fertilizer in which Rs was continuously measured after N addition during the growing season in a Chinese pine forest. Four levels of N addition, i.e. no added N (N0: 0 g N m⁻² year⁻¹), low-N (N1: 5 g N m⁻² year⁻¹), medium-N (N2: 10 g N m⁻² year⁻¹), and high-N (N3: 15 g N m⁻² year⁻¹), and three organic matter treatments, i.e. both aboveground litter and belowground root removal (LRE), only aboveground litter removal (LE), and intact soil (CK), were examined. The Rs was measured continuously for 3 days following each N addition application and was measured approximately 3–5 times during the rest of each month from July to October 2012. N addition inhibited microbial heterotrophic respiration by suppressing soil microbial biomass, but stimulated root respiration and CO₂ release from litter decomposition by increasing either root biomass or microbial biomass. When litter and/or root were removed, the “priming” effect of N addition on the Rs disappeared more quickly than intact soil. This is likely to provide a point of view for why Rs varies so much in response to exogenous N and also has implications for future determination of sampling interval of Rs measurement.

     

臭氧活性炭-后置砂滤工艺对水中农药的控制效能

选择我国饮用水水质标准中有相关规定,以及部分用量较大或虽被禁用但仍有残留的农药共25种,对黄浦江水源水以及采用臭氧活性炭-后置砂滤工艺的某水厂工艺段出水中的浓度分布进行了调查,评估了砂滤后置工艺条件下相应农药的实际处理效果。结果表明:原水中有包括莠去津、乐果、六氯苯、敌敌畏、乙草胺、丁草胺、仲丁威和p,p'-DDT的8种农药检出,且总浓度较高达到760 ng/L,其中莠去津和乙草胺含量较高,最高浓度分别达到531 ng/L和277 ng/L;从季节性分布来看,春季总农药浓度最高达760 ng/L,秋季最低为175 ng/L。从工艺去除效果来看,臭氧活性炭砂滤后置工艺对农药的总体去除率为62%~78%,与冬春季相比,夏秋季节的农药的去除率提高约10%左右,这可能与高温期微生物活性较高有关。值得关注的是,砂滤后置工艺与同期常规臭氧活性炭工艺相比农药的总去除率要低10%左右,应结合总体出水水质情况对其进一步评估。