偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附

以腈纶纤维为原料络合Fe3+制得偕胺肟合铁(Ⅲ)纤维,用其处理α-萘酚溶液,研究了偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附工艺条件和吸附动力学参数。实验结果表明,偕胺肟合铁(Ⅲ)纤维对α-萘酚的最佳吸附工艺条件为pH=3.0、吸附温度313.15K和吸附时间45min。在最佳工艺条件下,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附在所研究的α-萘酚浓度范围内符合Freundlich等温吸附方程。未达到饱和吸附前,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附符合一级反应动力学特征。     

直播稻田渗漏水磷素动态变化及渗漏流失潜力研究

通过田间实验,对太湖流域丹阳地区直播水稻田不同施磷水平下渗漏水磷素动态变化特征及流失潜力进行了研究。结果表明,施磷能明显提高地下60cm以上深度土层渗漏水磷的含量。各土层渗漏液总磷浓度随土层深度的增加呈下降趋势。随着施磷量的增加,稻田渗漏水磷素含量也会随之增加。土壤磷素发生渗漏流失的土壤表层Olsen-P含量的"突变点"change-Point为25.17 mg/kg。当土壤中的Olsen-P浓度小于25.17mg/kg时,20～40cm土层渗漏水中TP浓度基本上不随土壤Olsen-P浓度的变化而变化,但当土壤中Olsen-P大于25.17mg/kg时,20～40cm土层渗漏水中TP浓度会大量增加,且土壤中的Olsen-P每增加10 mg/kg,渗漏水TP将增加0.21 mg/L。稻田当季累计土壤磷素渗漏流失负荷为1.02 kg/ha,占当季施磷量的2.80%。     

饮用水消毒副产物控制工艺研究进展

通过对氯、二氧化氯、紫外线等常见消毒工艺以及去除已生成消毒副产物的深度处理工艺进行了分析,探讨了各种消毒工艺的消毒性能和对消毒副产物的控制效果以及各种深度处理工艺对消毒副产物的去除性能,为实际水处理中消毒以及深度处理工艺的选择提供了参考。     

循环经济下再生资源规范回收行为研究

提出将再生资源回收分为规范回收与非规范回收两种类型,认为回收行为是建立规范循环经济体系规划的数据基础和政策效应的微观基础。以废旧家电为例,设计了包括废旧家电回收再利用形势感知、回收现状、回收再利用态度、回收影响因素、回收行为以及废旧家电生态消费态度、生态消费问题感知、生态消费影响因素、生态消费行为等9类共31个问题,通过对312名在校大学生的调查,分析了样本个体废旧家电回收因素、样本家庭实际回收行为及现状因素、样本个体废旧家电回收方式的影响因素等废旧家电回收问题及行为总体状况,采用单因素分析方法,深入挖掘了样本不同的社会—经济、社会—人口属性及其他相关因素在废旧家电回收行为上的差异性,给出了相应的理论解释。在调查分析的基础上,提出了促进再生资源规范回收的实施对策。     

基于PSR框架的耕地集约利用及其驱动力研究——以江西省为例

随着社会经济的发展以及城市化进程的加快,部分耕地非农化已成必然,开展耕地集约利用研究,对缓解人地矛盾、保障社会经济可持续发展具有重要的意义。以江西省为例,从人地关系角度出发,构建基于PSR模型的耕地集约利用评价指标体系,运用熵值法、极差标准化方法及综合指数法,计算出1998~2007年江西省耕地利用集约度,得出在这期间江西省耕地集约利用水平及PSR各子系统协调度呈上升趋势;并通过SPSS软件采用主成分分析法,分析其耕地集约利用水平变化的驱动因素,主要概括为社会经济因素、耕作资源及政策制度因素、自然因素。研究结果可为江西省今后耕地集约利用提供一定的科学依据,也为其他省份提供一些参考价值。     

Influence of soil and hydrocarbon properties on the solvent extraction of high-concentration weathered petroleum from contaminated soils

Petroleum ether was used to extract petroleum hydrocarbons from soils collected from six oil fields with different history of exploratory and contamination. It was capable of fast removing 76–94 % of the total petroleum hydrocarbons including 25 alkanes (C₁₁–C₃₅) and 16 US EPA priority polycyclic aromatic hydrocarbons from soils at room temperature. The partial least squares analysis indicated that the solvent extraction efficiencies were positively correlated with soil organic matter, cation exchange capacity, moisture, pH, and sand content of soils, while negative effects were observed in the properties reflecting the molecular size (e.g., molecular weight and number of carbon atoms) and hydrophobicity (e.g., water solubility, octanol–water partition coefficient, soil organic carbon partition coefficient) of hydrocarbons. The high concentration of weathered crude oil at the order of 10⁵ mg kg^?1 in this study was demonstrated adverse for solvent extraction by providing an obvious nonaqueous phase liquid phase for hydrocarbon sinking and increasing the sequestration of soluble hydrocarbons in the insoluble oil fractions during weathering. A full picture of the mass distribution and transport mechanism of petroleum contaminants in soils will ultimately require a variety of studies to gain insights into the dynamic interactions between environmental indicator hydrocarbons and their host oil matrix.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

有机改性成都粘土预处理垃圾渗滤液

以成都粘土为原料,十六烷基三甲基溴化铵(HDTMA)为改性剂制备有机改性土,并将其应用于垃圾渗滤液的预处理。采用单因素静态吸附实验,以粘土对垃圾渗滤液COD和氨氮的去除率作为考查指标,初步探究有机改性土预处理垃圾渗滤液的适宜条件;并对有机改性粘土及原土进行性能表征,初步分析其吸附机理。研究结果表明,有机土的处理效果明显优于原土,处理效果上比原土提高了1.6~2.3倍;有机土预处理垃圾渗滤液适宜条件为:投加量120 g/L、搅拌速度200 r/min、搅拌时间50 min、pH=7、静置时间为6 h。     

镍基催化剂对污泥微波热解制生物气效能的影响

为实现污水污泥减量化、无害化及资源化的目标,在微波热解污水污泥基础上,进行了镍基催化剂对制取生物气效能影响的研究。采用元素分析对污泥元素进行检测,气/质联用分析(GC-MS)和气相色谱(GC)对热解生物气的组成和含量进行测定。实验结果表明,镍基催化剂的添加对微波热解污水污泥制取生物气有较大促进作用。5%添加量与800℃热解终温条件下具有最佳催化效果:生物气中H2、CO产量最大,H2产量由29 g/kg增加到35.8 g/kg,提升23.4%,CO产量由302.7 g/kg增加到383.3 g/kg,提升26.6%;同时催化剂还能提高热能利用效率,降低热解终温,即5%添加量在700℃热解终温时可达到空白800℃时的产气效果;镍基催化剂主要在500~600℃时发挥催化作用,加快了H2和CO的释放。微波热解污泥制取的生物气具有产量大、富含H2与CO等优点,可推动污水污泥的资源化进程。     

基于智能优化算法的河流水质模型参数的优化简

为探索河流水质模型参数新的求解方法,根据有限的实测数据,分别应用免疫进化优化算法和免疫进化优选的捕食搜索算法,对河流水质模型计算公式中的多参数进行优化。将优化得到的计算公式用于国内外若干河流的河段中DO浓度值的拟合,并与实测结果进行了比较。结果表明,将免疫进化优化算法或免疫进化优选的捕食搜索算法优化得到的水质模型参数精度不仅较高,而且相对稳定,从而为河流水质模型参数的优化提供了一种新方法。