膜生物反应器处理甲苯性能及机制

采用膜生物反应器处理甲苯有机废气,研究了进气浓度、停留时间、循环液喷淋密度和pH值对甲苯去除率的影响.膜生物反应器能高效净化挥发性有机废气,甲苯去除率可达99%.适宜运行条件为:pH值为7.2、停留时间为6.4 s、循环液喷淋密度为2.5 m3.(m2.h)-1.采用GC-MS分析出口气样,研究结果表明乙醛酸(C2H2O3)和乙烯基甲酸(C3H4O2)为甲苯生物降解的中间产物.膜生物反应器处理甲苯机制为甲苯气体通过中空纤维膜传质到生物膜,被生物降解为乙醛酸和乙烯基甲酸,然后继续好氧降解为最终产物二氧化碳和水.     

TiO2/PS/Fe3O4 光催化剂的低温制备及其光催化和磁回收性能

以聚苯乙烯(PS)包覆油酸修饰过的纳米Fe3O4为磁核,在低温(90℃)、中性(pH=7左右)条件下,制备了以PS为惰性隔离层的磁载TiO2光催化剂.用X射线衍射仪(XRD)、透射电子显微镜(TEM)、傅里叶红外分光光度计(FT-IR)、振动样品磁强计(VSM)对催化剂的物相组成、形貌、表面性质、磁学性质进行了表征.以苯酚为模拟污染物,考察了其光催化活性,以自制的磁回收装置,考察其回收特性.结果表明,低温制备的TiO2为锐钛矿结构,平均粒径为2～5 nm,催化剂TiO2/PS/Fe3O4[其中物质的量比为n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]具有结构完整的壳/壳/核结构,TiO2在PS/Fe3O4表面负载牢固;光催化降解苯酚遵循一级反应动力学方程,TiO2/PS/Fe3O4[n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]的反应速率常数K=0.025 8,与纯TiO2的活性接近(K=0.026 2);循环使用5次后,反应速率常数仅降低0.003 4.所制催化剂具有较强的磁感应强度,平均回收率可达到92%以上.该低温水解法制备的磁载TiO2光催化剂具有良好的应用前景.     

铜胁迫对不同基因型谷子幼苗基因组DNA多态性的影响

采用室内盆栽土培法,以4种基因型谷子(D2-8、安06、黄米、朝谷)为供试材料,研究了不同浓度Cu2+胁迫对谷子幼苗体内可溶性糖、脯氨酸、丙二醛(MDA)含量和基因组DNA多态性的影响.结果表明,经50~400 mg·kg-1Cu2+处理30 d后,4种谷子幼苗体内可溶性糖含量与对照相比呈现先上升后下降的趋势,在50 mg·kg-1时达到最大值.当浓度为200mg·kg-1以上时,4种谷子的可溶性糖含量的平均降幅为对照的32.44%~56.5%.脯氨酸则表现为低含量(≤50 mg·kg-1)的促进和高含量(≥100 mg·kg-1)的抑制效应,MDA含量均有增加且与对照差异显著(P<0.05).Cu2+胁迫下不同基因型谷子幼苗基因组DNA的RAPD图谱发生明显变化,表现为单条或多条RAPD谱带的增加和缺失或者荧光强度的改变,细胞中基因组模板DNA的稳定性下降,DNA多态性变化与Cu2+浓度之间存在剂量-效应关系.不同基因型谷子对Cu2+胁迫的生理和遗传损伤响应存在差异.利用RAPD技术获得的DNA多态性变化可作为检测Cu2+遗传毒性效应的生物标记物.     

基于SWAT模型的三峡库区香溪河非点源氮磷负荷模拟

三峡水库蓄水后,水动力条件改变下营养盐的过量输入导致部分支流库湾水华现象及水体富营养化问题严重.本文以香溪河为研究示范区,基于GIS平台建立流域下垫面空间数据库,以氮磷为研究对象,应用SWAT模型对流域三大主要水系及涉及35个子流域进行2000-2009年径流、营养盐输出模拟研究,并对实测数据和模拟结果进行分析,结果表明:径流模拟结果校验阶段的效率系数0.65和0.86,确定系数是0.78和0.91,模拟效果较好,径流和营养盐负荷受降雨影响呈正相关关系,在丰水年和丰水季节较大,2000-2009年期间TN和TP年均负荷分别是2640.64和300.01 t,在2007年达到最大值,分别是3475.96和399.20 t,在2005年为最小值,分别是2036.72和226.44 t,TN和TP负荷的贡献率高岚水系＞古夫水系＞南阳水系,支流TN和TP输出强度空间差异较大,空间分布差异系数分别是0.34和0.58,TN最大值和最小值是29.39 kg·hm-2·a-1和3.86 kg·hm-2·a-1,TP最大值和最小值分别是4.90 kg·hm-2·a-1和0.54 kg·hm-2·a-1.     

用氯和氢氧同位素揭示洋戴河平原地下水的形成演化规律

通过分析地表水和地下水中氯离子浓度和δD、δ¹⁸O值的空间分布特征,揭示了秦皇岛洋戴河平原地下水的形成演化规律.结果发现,洋戴河平原地表河水来源于中上游水库水和大气降水的混合,且河水沿程受到δD、δ¹⁸O值、氯离子浓度更低的支流或灌渠水补给,从而使δD、δ¹⁸O值、氯离子浓度呈现沿程逐渐降低的现象.山前丘陵区地下水主要接受大气降水的直接补给,洪积扇及山麓地带地下水受到了一定的蒸发作用影响,除了接受丘陵区地下水的侧向补给外,洋河附近地下水还受到洋河水库水的混合.研究区西部咸水带的地下水由上游地下水和大泥河地热咸水混合而成,地热咸水的混合比率约为13%,而东部咸水带的地下水由上游地下水、本地污水和地热咸水混合而成,地热咸水的混合比率不超过9%.在海水入侵区,地下水主要由本区地下淡水和海水(海水混合比率不超过10%)混合而成,并且受到了不同程度的地表水或农田灌溉水的补给,其中,浦河一带是地表水或灌溉水补给较为明显的地段.     

滇池水葫芦规模化控养生态环境效应分析

水葫芦规模化控养是"十二五"期间滇池治理的重要措施之一。首先介绍了滇池水葫芦规模化控养现状,比较了滇池草海和外海在水葫芦控养前后水质的变化情况,指出滇池水葫芦规模化控养对草海水体生态恢复效果显著,可以在滇池选择适宜水葫芦生长的水域继续扩大水葫芦控养面积,使水葫芦在滇池生态治理中发挥更大的作用。     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

关于加强我国污染场地环境管理政策建议探讨

本文在综述当前我国污染场地环境管理现状基础上,探讨了加强污染场地环境管理相关政策建议,以期为我国进一步完善污染场地环境管理提供决策参考。具体建议：强化污染场地信息管理;把握和贯彻基于风险的管理理念;搞好标准建设工作;重视复合绿色修复技术的研发;逐步开创适宜的融资机制和模式;建立合理有效的公众参与和信息公开制度。     

蔗渣垫料在零排放发酵床养猪中的应用研究

目前微生物发酵床养猪垫料是选用木屑、谷壳作为原料,来实现零排放养猪。文章选用农业固体废弃物——蔗渣为垫料应用于零排放漏缝发酵床养猪,跟踪了3个月垫料在实际使用中的温度、有机质、氮、磷、钾、微生物指标,对蔗渣的使用效果进行了评价,并建立PCR反应体系来扩增DNA,利用PCR-DGGE技术对垫料中的微生物群落多样性进行研究。结果表明:蔗渣作为垫料,能使垫床温度控制在40⁶5℃之间,保证了良好的发酵效果、且有效活菌数达到0.22×109cfu/g,可以对猪粪便等有机质进行较彻底的消解,因此蔗渣可以作为一种垫料应用于零排放漏缝发酵床;垫料中总养分达到1.371 7%,使用后的垫料可以作为一种原料生产生物有机肥。     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.