垃圾焚烧飞灰有毒重金属固化稳定技术研究综述

采用焚烧法处理生活垃圾正呈快速增长的趋势,焚烧过程产生的飞灰中所含有的大量有毒重金属对自然环境和人类生存都造成极大影响。阐述了目前常用的几种固化稳定垃圾焚烧飞灰有毒重金属的方法,综合分析了其固化特点和优缺点,并初步探索了一种低能耗环境下实现高温熔融处置技术的有效途径,从而为垃圾焚烧飞灰高温固化稳定有毒重金属的实施提供一定的理论基础和技术支持。     

城市污水处理厂污水处理系统中四环素类药物耐药菌的分布特性研究

采用微生物平板涂布法对2家城市污水处理厂污水处理各阶段的四环素类药物(四环素、金霉素、土霉素)耐药菌分布进行了测定,分析了污水处理的各阶段对四环素类药物耐药菌的去除效果。结果显示,2家污水处理厂污水处理系统中均能检出土霉素、四环素、金霉素耐药菌,数量分布均为土霉素耐药菌>四环素耐药菌>金霉素耐药菌。3种耐药菌的浓度均在加氯消毒出水中为最小(在0～103 cfu/mL),在外排污泥中最大(高于进水浓度,在105～107 cfu/mL)。四环素耐药菌数从进水的1.1×105～1.6×105 cfu/mL降为出水的0～5.5×102 cfu/mL,说明污水处理过程对四环素耐药菌有一定的去除效果,但四环素耐药菌占总菌数的百分比没有明显下降或上升,相比于进水的1.1%～3.4%,出水仍然保持在3.1%～4.3%左右,表明污水处理过程中没有选择性的富集或去除四环素耐药菌。     

铁炭微电解工艺处理采油废水的研究

随着采油废水产生量的逐渐增大以及排放标准的日益严格,寻找一种经济、高效的处理方法显得十分必要。采用铁炭微电解技术对冀东油田采油废水进行了处理。考察了铁屑粒径、pH值、Fe/C质量比和反应时间对COD去除率的影响并设计了正交实验,结果表明,影响微电解工艺的因素主次关系为:pH>Fe/C质量比>反应时间,在最佳条件pH=5,Fe/C质量比为7∶1,反应时间50 min下,原水COD由170 mg/L降至95.6 mg/L,去除率达43.85%,出水满足国家二级排放标准。     

Fe3O4/SDS磁性纳米颗粒吸附水体中的Cd2+和Zn2+

一种新型纳米固相萃取吸附剂,由阴离子表面活性剂十二烷基磺酸钠(SDS)包裹在Fe3O4磁性纳米颗粒表面形成,用于吸附水溶液中的重金属离子。研究了吸附过程的主要影响因素(如SDS浓度、溶液pH等)以及解吸过程的最佳条件,并对其机理进行了初步的探讨。研究结果表明,共沉淀法制备的Fe3O4颗粒粒径分布均匀,平均粒径约为54 nm;SDS浓度为300 mg/L时,Fe3O4/SDS磁性纳米颗粒吸附Cd2+和Zn2+的能力最强;在一定浓度范围内,Fe3O4/SDS体系对Cd2+和Zn2+的吸附平衡数据符合Langmuir吸附等温方程,饱和吸附量分别为22.42 mg/g和13.95 mg/g。最终结果表明,Fe3O4/SDS磁性纳米颗粒具有较强磁分离能力和较好的吸附效果。     

四川生态旅游农业模式及其可持续发展之浅见

本文论述了生态旅游农业的特点和四川发展生态旅游农业的优势和意义,归纳了四川生态旅游农业的几种模式,并对四川生态旅游农业可持续发展提出了几点浅见。     

大港油田苦咸再生水反渗透工艺自动控制研究

分析了大港油田污水回用深度处理工程苦咸再生水反渗透工艺仪表配置及自动控制方式,介绍了苦咸再生水反渗透系统亟待解决的各类问题。着重论述了仪表设置、余氯控制、结垢污堵控制、微生物污堵控制的实际运行方式,探讨了苦咸再生水反渗透工艺的技术可行性和可靠性。     

石油污染土壤原位生物修复的强化实验研究

为研究添加营养物质和高效降解石油微生物对油污土壤生物修复的作用,通过分层土柱的方法,连续监测了不同条件下不同土层的含水率、石油烃含量、细菌数量及脱氢酶活性。结果表明:添加营养物质同时接种高效微生物可使降解效果明显改善,降解率比在自然条件下提高近50%,而单纯添加营养物质不接种高效微生物可使降解率比在自然条件下提高约25%。降解初期,上层土壤降解效果较好,而到中后期,中下层降解效果好于上层。微生物数量和脱氢酶活性与石油降解率之间存在良好的相关性,脱氢酶活性比微生物数量更能反映修复过程中微生物的存活状态。添加营养物质和高效降解石油微生物对油污土壤原位生物修复具有强化作用。     

水资源生态足迹分析——以安康市为例

根据生态足迹分析方法,建立了水资源生态足迹概念模型,确定了计算水资源帐户生态足迹所需的3个关键参数,即平均水资源产量、均衡因子和地区产量因子,计算了安康市1996—2007年水资源生态足迹和生态承载力。引入水资源生态足迹压力指数、万元GDP水资源生态足迹、累积水资源生态足迹等指标,利用水足迹模型评价水资源可持续发展程度的全面性和对比性。结果表明,计算结果可客观评价安康市水资源可持续发展与利用情况,为地区水资源的可持续利用与管理提供了科学的依据。     

Atmospheric deposition of phthalate esters in a subtropical city

In Chinese cities, air pollution has become a serious and aggravating environmental problem undermining the sustainability of urban ecosystems and the quality of urban life. Bulk atmospheric deposition samples were collected two-weekly, from February 2007 to January 2008, at three representative areas, one suburban and two urbanized, in the subtropical city, Guangzhou, China, to assess the deposition fluxes and seasonal variations of phthalate esters (PAEs). Sixteen PAE congeners in bulk deposition samples were measured and the depositional fluxes of ∑₁₆PAEs ranged from 3.41 to 190 μg m^?2 day^?1, and were highly affected by local anthropogenic activities. The significant relationship between PAEs and particulate depositional fluxes (correlation coefficient R² = 0.72, P < 0.001) showed PAEs are associated primarily with particles. Temporal flux variations of PAEs were influenced by seasonal changes in meteorological parameters, and the deposition fluxes of PAEs were obviously higher in wet season than in dry season. Diisobutyl phthalate (DiBP), Di-n-butyl phthalate (DnBP), and Di(2-ethylhexyl) phthalate (DEHP) dominated the PAE pattern in bulk depositions, which is consistent with a high consumption of the plasticizer market in China. PAE profiles in bulk deposition showed similarities exhibited in both time and space, and a weak increase of high molecular weight PAE (HMW PAE) contribution in the wet season compared to those in the dry season. Average atmospheric deposition fluxes of PAEs in the present study were significantly higher than those from other studies, reflecting strong anthropogenic inputs as a consequence of rapid industrial and urban development in the region.     

Simulating chemistry–aerosol–cloud–radiation–climate feedbacks over the continental U.S. using the online-coupled Weather Research Forecasting Model with chemistry (WRF/Chem)

The chemistry–aerosol–cloud–radiation–climate feedbacks are simulated using WRF/Chem over the continental U.S. in January and July 2001. Aerosols can reduce incoming solar radiation by up to ?9% in January and ?16% in July and 2-m temperatures by up to 0.16 °C in January and 0.37 °C in July over most of the continental U.S. The NO₂ photolysis rates decrease in July by up to ?8% over the central and eastern U.S. where aerosol concentrations are high but increase by up to 7% over the western U.S. in July and up to 13% over the entire domain in January. Planetary boundary layer (PBL) height reduces by up to ?23% in January and ?24% in July. Temperatures and wind speeds in July in big cities such as Atlanta and New York City reduce at/near surface but increase at higher altitudes. The changes in PBL height, temperatures, and wind speed indicate a more stable atmospheric stability of the PBL and further exacerbate air pollution over areas where air pollution is already severe. Aerosols can increase cloud optical depths in big cities in July, and can lead to 500–5000 cm^?3 cloud condensation nuclei (CCN) at a supersaturation of 1% over most land areas and 10–500 cm^?3 CCN over ocean in both months with higher values over most areas in July than in January, particularly in the eastern U.S. The total column cloud droplet number concentrations are up to 4.9 × 10⁶ cm^?2 in January and up to 11.8 × 10⁶ cm^?2 in July, with higher values over regions with high CCN concentrations and sufficient cloud coverage. Aerosols can reduce daily precipitation by up to 1.1 mm day^?1 in January and 19.4 mm day^?1 in July thus the wet removal rates over most of the land areas due to the formation of small CCNs, but they can increase precipitation over regions with the formation of large/giant CCN. These results indicate potential importance of the aerosol feedbacks and an urgent need for their accurate representations in current atmospheric models to reduce uncertainties associated with climate change predictions.