湘中地区恩口煤矿老采区复采的水害防治研究

湘中地区碳酸盐岩广泛分布,其中岩溶的发育受岩性、地貌、水文、构造运动等诸多因素的控制,主要分布在地下水排泄区,给煤炭资源的开发带来了严重水患。针对恩口煤矿水害问题,笔者在翔实的野外调查基础上,通过分析矿区水文地质条件、矿井水文地质特征;总结以往矿山防治水经验和教训;探讨今后老采区复采的防治水害方向和重点;认为壶天河的山口冲段、小碧河的西坪段、涟水河的杨家冲段等为重点防区,对河床铺底强度不可靠的部位应该重新加强铺底。     

HSE管理体系的基层安全教育培训探讨

安全教育培训是石油行业一项非常重要的安全基础性工作,扎实开展基层员工安全培训,提高安全综合素质,增强事故防范能力,防止发生不安全行为,才能真正达到预防事故的目的。本文从七个方面介绍基层安全教育培训的一些方法与实践,针对性强、实用性好,并已在基层单位取得了较好的效果。     

无机-有机高分子复合絮凝剂处理含油废水的试验研究

研究了用聚合氯化铝（PAC）、聚合硫酸铁（PFS）、聚丙烯酰胺（PAM）及改性蒙托石等不同无机—有机高分子絮凝剂复配使用处理炼钢厂连铸含油废水的除油效果,考察了不同絮凝剂的复配以及絮凝剂的不同复配比例对处理效果的影响。试验结果表明,用聚合氯化铝（PAC）＋聚合硫酸铁（PFS）＋聚丙烯酰胺（PAM）3种絮凝剂复配使用除油效果最佳,当3种絮凝剂的复配比为2∶2∶3时除油效果最好,除油率达到88.2%,达到国家排放标准。     

改性木屑吸附剂对印染废水的脱色性能研究

本文介绍了以廉价易得的杨树木屑为原料，经环氧氯丙烷交联，制备的一种新的生物吸附剂，研究各种反应因素（氢氧化钠浓度、环氧氯丙烷用量、反应温度、木屑粒径等）对反应过程和吸附剂性能的影响，检验了其对品红及孔雀石绿在不同条件下的吸附性能，并探讨了它的吸附动力学曲线和再生性能。     

灰色层次结构模型在故障树分析中的应用

故障树分析技术对于复杂系统的故障诊断具有重要应用价值,提出把故障树看作2层灰色结构,通过建立灰色层次结构模型,给出判断各种故障模式发生可能性大小的一种通用方法.将其应用于压力容器爆炸事故的故障树分析,并取得了与实际情况吻合的满意结果.该方法为了解事故影响因素重要程度、控制事故发生和改进系统可靠性提供依据.     

2 000 m3高炉出铁场除尘系统分析

出铁场除尘系统在投产初期烟气捕集效果明显,随着运行时间的延长,系统阻力增加,风量衰减,最终导致烟气捕集效果下降,在高炉厂房外烟气外溢现象时有发生.从除尘系统的设计入手,对运行中存在的问题进行了分析,提出了解决问题的建议.     

烟气脱汞技术现状简述

火力发电厂是我国最主要的烟气排放源, 期间微量元素汞将以不同的形式排放到大气中,对环境造成很大的危害.汞控制技术一般分为燃烧前脱汞,燃烧中脱汞及燃烧后脱汞.燃烧后脱汞是汞控制技术的主要方式,近些年研究异常活跃,主要表现在2个方面:一方面加强了各种吸收剂的研究,另一方面加强利用现有的脱硫装置脱汞的研究.     

Water Network Synthesis Using Mutation-Enhanced Particle Swarm Optimization

Different techniques for the synthesis of industrial water reuse/recycle networks have been developed in recent process integration research. These tools range from graphical pinch analysis approaches to mathematical programming models. The latter have the advantage of being flexible enough to incorporate various water network constraints, but in many cases these are often non-linear, thus making the identification of global optima difficult. Recent work has demonstrated the effectiveness of metaheuristic algorithms such as particle swarm optimization (PSO), for finding good solutions these problems. This work describes the use of a modified PSO for solving mixed integer non-linear programming (MINLP) models for water network synthesis. By incorporating a mutation operator for the binary variables in the model, the algorithm is able to escape sub-optimal network topologies and proceed towards better solutions than can be found with ordinary PSO. Two case studies involving water recycle/reuse are used to demonstrate the new design methodology.     

Moderation of dust explosions

Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.

Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.

Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature.     

Trace monitoring of water-borne phenolics in the Klang River Basin

The Klang River Basin is located in the most densely populated region in Malaysia, with its heavy concentration of industries and population. A systematic study of the pollution to this river system caused by phenolic compounds have been carried out under this project. Analyses of water samples from the Klang River by high performance liquid chromatography (HPLC) with an ultraviolet (UV) detector at 280 nm have shown the presence of some priority phenolic pollutants.