基于HLA的大气环境仿真应用研究

针对大气环境仿真的特点,采用HLA分布式仿真技术,论述了以HLA/RTI为支撑的大气环境分布式仿真体系结构、关键技术及实现方案,并对该环境下开发大气环境联邦成员进行了详细的说明,实现了大气环境建模与仿真应用的一体化设计,从而提高了大气环境仿真应用的互操作性和可重用性,为大气环境仿真向其它系统仿真应用提供了一种有效的手段。     

沙尘对直升机挂架影响的分析及试验验证方法

介绍了直升机寿命周期中遇到的沙尘环境类型和沙尘破坏机理以及影响沙尘作用的主要因素。系统地分析了沙尘对挂架的影响以及在挂架设计中的抗沙尘设计和实际使用过程中的控制和防护,最后给出了实验室沙尘环境模拟试验方法。     

Adsorption characteristic of bensulfuron-methyl at variable added Pb^2＋ concentrations on paddy soils

The combined pollution of heavy metal Pb²⁺ and bensulfuron-methyl (BSM), originating from chemical herbicides, in agroecological environments has become commonplace in southern China. The adsorption of BSM on three paddy soils in the presence of Pb²⁺ was examined using high-performance liquid chromatograph (HPLC). Results indicated that adsorption of BSM could accurately be described by a Freundlich isotherm equation with correlation constant (R) > 0.98, irrespective of the presence of spiked Pb²⁺. Of the various factors influencing BSM sorption, soil pH appeared to be the most influential. The constant K_f of Freundlich isotherm equation tended to increase with increasing Pb²⁺ concentration in soil which indicated that the spiked of Pb²⁺ in paddy soils would promote the sorption of BSM. ΔG^θ of BSM in three paddy soils was less than 40 kJ/mol in all treatments, indicating the adsorption of BSM is mainly physical in nature. The elution of soil dissolved organic matter (DOM) enhanced the adsorption of BSM in paddy soils. The mechanisms involved in the promotion effects of the spiked Pb²⁺ on BSM adsorption might be the modified surface characteristics of paddy soil solids due to the soil acidification and the increase of soil organic matter concentration because of DOM binding.     

Elimination of a pollution associated with chromic acid during the electro-deposition of Cr(III) using appropriate anodic and membrane materials in a double film bath

A method using trivalent chromium has been used to replace hexavalent chromium for the electro-deposition of chromium. Using a tri-chamber bath system various anodic materials and membranes were evaluated to minimize the production of environmentally and health damaging chromic acid. By measuring the absorbance of Cr(VI) at 640 nm, the results indicate that the use of a titanium plated ruthenium (Ti-Ru) anode produces the least amount of chromic acid byproduct compared to lead-gold alloy and graphite anodes. The concentration of Cr(VI) in the immediate vicinity of the Ti-Ru anode decreased from 0.389 mg/L to 0 during a 40-min deposition period. The use of a Nafion^TM quaternary cation exchange membrane portioning the buffer and anode selectively prevented Cr(III) from entering the anode compartment whilst allowing the migration of H⁺ to maintain overall voltaic continuity. It has been demonstrated that the use of a Ti-Ru anode with a Nafion^TM membrane can eliminate the production of chromic acid associated with the electro-deposition of chromium plate thereby preventing its health damaging exposure to plant operators and preventing discharge of Cr(VI) into the environment. Addition of a surfactant improved current efficiency by 34.7%.     

成都经济区土壤中HCH和DDT含量及其分布特点

通过对成都经济区土壤中HCH各异构体、DDT及其衍生物的含量及分布特点研究,得出成都经济区土壤中HCH和DDT都有较高的检出率,含量变化幅度也很大,含量较高点主要分布在化工厂附近。对比其他地区研究结果,成都经济区HCH含量较低,DDT含量较高。以西藏地区作为背景值,HCH有一定的污染,DDT污染较为严重。     

钛酸铋光催化降解水中酸性大红的研究

采用异丙醇助水热法制备了钛酸铋光催化剂,UV-vis漫反射测试表明其光吸收带较TiO2发生了红移,通过多点BET法计算出其比表面积为14.16m2/g,平均孔径为21.05nm。以酸性大红为模拟污染物,在三相内循环流化床光催化反应器中进行光催化反应,研究了废水的pH值以及钛酸铋投加量对酸性大红脱色率的影响。结果表明:废水的pH=3.0,催化剂投加量为0.1g/L是最佳反应条件;当流量为10L/h时,连续运行3h后,酸性大红染料的去除率可达92.0%;当处理水量增大时,经过两级处理,酸性大红染料的总去除率仍可达到94.4%。     

Ⅰ Ⅱ-ASBR中厌氧颗粒污泥的微生物组成及特性

在35℃下以奶粉人工合成废水为底物连续运行了两段厌氧反应器(ⅠⅡ-ASBR),且于ⅠⅡ两柱中形成了两种不同的厌氧颗粒污泥,为了解厌氧颗粒污泥的微生态结构及生物学特性,对ⅠⅡ两柱中厌氧颗粒污泥的形态及微生物组成进行扫描电镜观察,并测定了其不同基质中的比产甲烷活性、辅酶F420和胞外多聚物的含量。结果表明:ⅠⅡ-ASBR反应器ⅠⅡ两柱中厌氧颗粒污泥形态及微生物组成差异明显,Ⅰ柱的厌氧颗粒污泥大而密实,Ⅱ柱的较小,呈多孔的网状结构,Ⅰ柱中厌氧颗粒污泥以甲烷八叠球菌、球菌及短杆菌为主,丝状菌较少,Ⅱ柱则以丝状菌、短杆菌为主,球菌较少;Ⅰ柱颗粒污泥利用葡萄糖、甲酸、丙酸的产甲烷活性较高,利用乙酸的活性相对较低,Ⅱ柱颗粒污泥利用葡萄糖、乙酸的产甲烷活性较高,而利用甲酸、丙酸的产甲烷活性较低;辅酶F420的含量Ⅱ柱比Ⅰ柱明显要高,而胞外多聚物含量Ⅰ柱比Ⅱ柱的高。     

金属波纹填料在废油处理中应用的研究

文章主要对其结构特征进行剖析,并对波纹板在油液处理过程中的作用原理进行分析。通过两种油水分离材料进行真空脱水试验,真空脱水第一次循环中,金属波纹板的脱水率为79.12%,较传统折叠丝网脱水率高21%,证明金属波纹填料对废油真空脱水有良好的效果。最后通过两种不同规格的金属波纹板填料进行真空脱水试验,证明比表面积较大的350Y波纹板填料在废油脱水中并不优于比表面积较小的250Y金属波纹板填料。     

直接大红4BE染料吸附脱色真菌的分离及特性研究

通过梯度富集培养,筛选到一株偶氮染料直接大红4BE吸附脱色真菌HS-DY08,该菌在基础培养基中,30℃、150r/min条件下,24h内对浓度为30mg/L的直接大红4BE的吸附脱色率达92%。脱色液动态扫描结果显示,随着HS-DY08菌株对染料的吸附脱色降解,直接大红4BE的吸收峰(526nm)明显降低,中间产物(325nm)的吸收峰逐渐升高,且染料吸附过程中菌体生长量增加,表明菌株对染料的吸附脱色过程中伴随着对染料的生物降解和利用。不同的共基质底物对直接大红4BE吸附脱色能力的促进作用依次为:PDB>葡萄糖>蛋白胨>NH4Cl。结合形态特征及显微观察结果,初步鉴定HS-DY08为青霉属(Pemnicillium sp.)。     

沉床微生态控制体对水体TP及COD的去除率研究

针对水体富营养化的生态逆境,以个体沉床微生态作为研究的基本单元。即通过控制其非生物和生物成分,局部构建以满足水生植物适生环境为核心的水体生态结构体,由个体到总体,以点带面,从而实现总体生态功能目标的恢复。此法融合了恢复生态学人为设计、自我设计理论,并突出人为干预的主导作用。通过沉床微生态控制体改善水质的正交试验,运用数量化理论分析方法,筛选出最佳组合为陶粒箱+页岩+金钱蒲+雨久花,在静态时TP的去除率可达到(76.6±1.17)%,COD的去除率达到(37.4±2.27)%;在动态时TP的去除率可达到(39.5±1.17)%,COD的去除率达到(16.03±1.41)%。其显著性与可靠性均达到95%以上,此结果可作为两种水体恢复应用时的参考。