降水量与城市大气环境关系——以113个环保重点城市为例

为研究降水量与大气污染物之间的关系,依据2017年全国113个环保重点城市大气质量数据,得出城市聚类空间分布规律及两者之间线性拟合方程。基于南北降水量分布特性与城市空气污染指数,采用模糊聚类法对具有不同亲疏程度的城市进行类别划分,运用Spearman相关性与拟合方程对大气污染特征值与降水量进行分析。结果表明：随着聚类种数增多,城市聚集在空间分布上由“环环相套”发展为“依流域分布”,降水量与大气污染物浓度呈现负向关联性,晋冀鲁豫陕省份污染最严重。采用Kolmogorov-Smirnov检验法,得出NO₂、O₃、PM_2.5总体分布符合正态分布,SO₂、PM₁₀、CO既不符合正态分布,也不符合均匀、指数分布,它们与降水量的相关系数为：-0.316、-0.238、-0.332、-0.617、-0.574、-0.695;线性拟合方程系数处于 [-0.031, -0.008] 之间,降水量与大气污染物浓度之间负相关性明显。研究结果有助于了解和认识降水量对城市大气环境变化的影响。     

太湖流域湖荡湿地水生植物的分布特征

2018年在太湖流域内的87个湖荡湿地调查中共发现64种水生植物,隶属于33科51属.总体来看,太湖流域水生植物种类、数量以及覆盖面积与历史上比较呈下降趋势.根据流域上不同地理区域分区（东、西、南、北4个）,分析太湖流域水生植物的分类和功能多样性,发现太湖流域四个区域的分类α多样性指数分别为4.33、5.58、5.01和3.46, β多样性指数分别为3.46、4.23、1.63和7.02,且北部和西部、北部和南部、东部和西部、东部和南部、西部和南部湖荡湿地的分类α多样性均有显著差异,同时太湖流域北部和东部、北部和西部、北部和南部、西部和南部湖荡湿地间的分类β多样性有显著差异.功能多样性方面,四个区域的β多样性指数分别为0.18、0.14、0.09、0.30,太湖流域各分区部分之间水生植物的功能β多样性均有显著差异.CCA结果表明环境变量对太湖流域湖荡水生植物组成的解释度为21.21%,水体总氮和总磷贡献最大,水体富营养化可能是影响太湖流域水生植物衰退的一个重要原因.     

城市雨洪过程模拟GPU加速计算效率研究

为量化分析GPU加速技术在城市雨洪过程模拟计算中效率提升效果,采用基于GPU技术的数值模型,对不同降雨及网格分辨率情形下的典型城市雨洪过程进行模拟,并对比分析GPU加速计算效率及其规律。结果表明:城市雨洪过程模拟中,GPU加速技术较CPU技术具有优势,不同情形下可提速23.88~158.72倍;在大暴雨和高分辨率网格条件下,GPU模型的提速效果更加明显,相较于短重现期降雨及低分辨率网格情形提升0.29%~8.43%,表明该技术适用于大范围高分辨率问题的模拟。该成果可为城市洪涝过程快速模拟预报提供技术支持。     

Characterization of a new smog chamber for evaluating SAPRC gas-phase chemical mechanism

A new state-of-the-art indoor smog chamber facility (CAPS-ZJU) has been constructed and characterized at Zhejiang University, which is designed for chemical mechanism evaluation under well-controlled conditions. A series of characterization experiments were performed to validate the well-established experimental protocols, including temperature variation pattern, light spectrum and equivalent intensity (J_NO2), injection and mixing performance, as well as gases and particle wall loss. In addition, based on some characterization experiments, the auxiliary wall mechanism has been setup and examined. Fifty chamber experiments were performed across a broad range of experimental scenarios, and we demonstrated the ability to utilize these chamber data for evaluating SAPRC chemical mechanism. It was found that the SAPRC-11 can well predict the O₃ formation and NO oxidation for almost all propene runs, with 6 hr Δ(O₃ – NO) model error of –3% ± 7%, while the final O₃ was underestimated by ~20% for isoprene experiments. As for toluene and p-xylene experiments, it was confirmed that SAPRC-11 has significant improvement on aromatic chemistry than earlier version of SAPRC-07, although the aromatic decay rate was still underestimated to some extent. The model sensitivity test has been carried out, and the most sensitive parameters identified are the initial concentrations of reactants and the light intensity as well as HONO offgasing rate and O₃ wall loss rate. All of which demonstrated that CAPS-ZJU smog chamber could derive high quality experimental data, and could provide insights on chamber studies and chemical mechanism development.     

Catalytic ozonation treatment of papermaking wastewater by Ag-doped NiFe2O4: Performance and mechanism

The catalytic ozonation treatment of secondary biochemical effluent for papermaking wastewater by Ag-doped nickel ferrite was investigated. Ag-doped catalysts prepared by sol-gel method were characterized, illustrating that Ag entirely entered the crystalline of NiFe₂O₄ and changed the surface properties. The addition of catalyst enhanced the removal efficiency of chemical oxygen demand and total organic carbon. The results of gas chromatography-mass spectrometer, ultraviolet light absorbance at 254 nm and three-dimensional fluorescence excitation-emission matrix suggested that aromatic compounds were efficiently degraded and toxic substances, such as dibutyl phthalate. In addition, the radical scavenging experiments confirmed the hydroxyl radicals acted as the main reactive oxygen species and the surface properties of catalysts played an important role in the reaction. Overall, this work validated potential applications of Ag-doped NiFe₂O₄ catalyzed ozonation process of biologically recalcitrant wastewater.     

紫外线对再生水中斜生栅藻的生长抑制效果

再生水具有就近易得、水量大且稳定等突出优点,已成为景观水体的重要补给水源。但再生水中含有氮、磷等营养物质,景观回用过程中可能会加剧藻类水华爆发风险。在藻类生长的早期阶段,采用紫外线处理有可能将再生水中藻类生物量控制在低风险范围,从而预防再生水景观回用水体中发生水华。以深圳市某污水处理厂二级出水为再生水回用景观水体的典型样品,考察了紫外线（254 nm波段）对典型微藻斜生栅藻的生长抑制效果,采用流式细胞术、调制荧光技术等方法,研究了不同紫外剂量对斜生栅藻的生长抑制效果,以及对藻细胞膜完整性和光合活性的影响。结果表明:对于初始密度约为7×104个/mL的斜生栅藻,50~100 mJ/cm2的紫外线能够取得1~5 d的生长抑制期,150~200 mJ/cm2剂量能将生长抑制期延长至10 d。紫外线能迅速引起斜生栅藻光合活性下降并能逐渐引起部分藻细胞破裂,100~200 mJ/cm2剂量处理后10 d内膜损伤细胞比例达到16%~71%。可见,紫外线能够对再生水中的斜生栅藻取得显著的生长抑制效果,是具有应用前景的景观水体水华风险防控手段。     

持久性有机污染物(POPs)超临界水修复技术的发展与展望

持久性有机污染物（POPs）具有持久性生物累积性、半挥发性和长距离迁移的性质,广泛位于土壤、废水和污泥中。我国目前面临的POPs污染问题日益严峻。由于超临界水修复技术具有快速、高效、无毒等优点,在POPs修复方面具有较好的应用前景。从超临界水特性、国内外超临界水修复技术等方面系统分析了国内外超临界水修复的研究现状、超临界水修复技术的优缺点和适用性,提出了超临界水修复关键技术及装备系统,以期为其发展和提升提供参考。     

电源模式对ADC12高硅铝合金微弧氧化膜层组织与性能的影响

目的探究三种电源模式对ADC12高硅铝合金微弧氧化膜层性能的影响,从中选择对其微弧氧化膜层性能较优的电源模式。方法在三种不同电源模式(交流电源、单极性脉冲电源和双极性脉冲电源)的条件下,应用微弧氧化(MAO)技术在ADC12高硅铝合金表面制备了陶瓷膜层,并采用扫描电镜(SEM)、X射线衍射仪(XRD)、显微硬度计、摩擦磨损试验机等手段表征ADC12铝合金微弧氧化膜层的显微组织与性能。结果三种电源模式下微弧氧化膜层中都存在α-Al_2O_3、γ-Al_2O_3和Al9Si等物相;双脉冲模式下制备的微弧氧化膜层的致密性最好,厚度为15μm,硬度达到719 HV,摩擦系数为1.2左右,膜层与基体开始脱落的载荷为25.8 N。交流模式下制备的微弧氧化膜层膜厚较低,厚度为9μm,硬度达到698 HV,摩擦系数为1.35左右,膜层与基体开始脱落的载荷为19.5 N。单极性模式下制备的微弧氧化膜层厚度为17μm,但硬度为706 HV,摩擦系数为1.35左右,膜层与基体开始脱落的载荷为13.09 N。结论通过三种电源模式的比较,ADC12高硅铝合金在双极性脉冲电源模式下制得膜层的综合性能较好。