滑动弧放电等离子体杀菌的研究进展

在介绍现有杀菌方法及其局限性的基础上提出滑动弧放电等离子体杀菌技术,阐述滑动弧放电等离子体产生的基本原理,介绍了基本的反应装置及其发展情况;探讨此技术在杀菌方面的研究进展,并从紫外线、臭氧、NO.和.OH自由基、H2O2等角度出发对杀菌机理进行了分析。最后对该项技术在杀菌领域的应用与发展提出了建议及展望。     

区域地下水污染预警：以巴伊盆地平原区为例

地下水污染预警是区域地下水污染防治的有效手段. 将地下水水质现状、地下水水质变化趋势和地下水污染风险三者耦合的地下水污染预警模型应用于巴里坤-伊吾盆地平原区,实现地下水水质状态预警和趋势预警相结合的区域尺度地下水污染预警研究. 采用基于综合权重的TOPSIS法进行地下水水质现状评价,通过计算得出的18眼原位地下水水质监测井的趋势度插值结果分析地下水水质变化趋势,利用迭置指数法将地下水脆弱性图、地下水污染荷载图和地下水功能价值图空间叠加得到地下水污染风险分布图. 结果表明,研究区地下水水质以良好和较好为主,且2011~2022年间呈稳定状态,地下水污染风险整体较低. 地下水污染预警级别整体较低,重警和巨警区分别占研究区总面积的16.4%和17.5%,主要分布在伊吾县的下马崖乡和巴里坤县的三塘湖镇北部、大红柳峡乡、大河镇,区域内出露的第四系沉积物以砂卵砾石为主,孔隙发育,透水性强,对污染物的截留和吸附能力较弱,工农业和生活产生的污染物易渗漏至地下水含水层,造成地下水水质较差和地下水污染风险较高,最终导致部分区域地下水污染预警级别高. 地下水污染预警研究为开展地下水污染修复提供重要的理论依据.     

换热器不锈钢换热管束开裂原因分析

一台换热器换热管束发生了开裂泄漏.采取全面检验的方式,通过宏观检查、化学成分分析、断口微观形貌和能谱分析、金相分析等方法,对换热管开裂原因进行了分析.结果表明:该换热管开裂为氯化物应力腐蚀开裂.壳程介质循环冷却水中CI元素含量是应力腐蚀开裂的主要因素,结构缺陷、敏感的工作温度区间、水中溶解氧和含S杂质导致了应力腐蚀的快速发展.     

Relationship embedding and environmental governance performance research of pollution in a mining area,China

Environmental Science and Pollution Research - The aim of this study was to explore the enterprises in the mining area, in the face of environmental pollution, to use relationship embedding to...     

玉米秸秆生物炭对沉积物中BDE-47生态毒性的影响

生物炭对于污染沉积物的原位修复具有很大的潜力,但关于生物炭对沉积物中有机污染物生态毒性影响的研究则较少报道。为评价生物炭对沉积物中BDE-47生态毒性的影响,以底栖动物铜锈环棱螺为测试生物,采用28 d慢性沉积物生物测试研究了不同添加比例的玉米秸秆生物炭(CSB)与BDE-47联合作用对BDE-47生物积累、肝胰脏细胞DNA损伤以及氧化胁迫生物标志物的影响。结果表明,在慢性暴露情况下,CSB对铜锈环棱螺不具有毒性;CSB通过显著降低沉积物间隙水中BDE-47的浓度而降低其在铜锈环棱螺体内的生物积累。在实验浓度范围内(1%～7%),CSB添加比例越高,降低BDE-47生物积累的效果越显著。不同添加比例的CSB均可以显著降低BDE-47对铜锈环棱螺DNA损伤的毒性,较高比例(4%和7%)CSB的效果更为显著,但BDE-47的氧化胁迫毒性不随CSB添加比例的升高而下降。因此,从降低BDE-47生态毒性的角度考虑,沉积物中CSB的合适添加比例为4%左右。     

矩形柱体地震动水压力的附加质量简化模型∗

针对矩形柱体在水中的振动问题,提出一种代替水-结构动力相互作用的附加质量模型。基于矩形柱体动水压力的计算公式、自由振动方程、自振频率和振型的计算公式,建立了水中矩形柱体地震动力反应的计算公式;基于柔性结构的一阶频率降低率,建立了矩形柱体柔性运动引起动水力的附加质量简化公式,并给出了水中矩形柱体自振频率的简化计算公式;基于刚性运动引起的动水力,建立了矩形柱体刚性运动引起动水力的附加质量简化公式;建立了地震作用下水中柱体结构的简化分析模型,即分别采用柔性和刚性运动附加质量的简化公式代替相应的水-结构相互作用。     

高温载硫活性炭的制备及脱汞能力研究

研究了载硫温度、硫炭比(简称S/C),吸附温度等因素对载硫活性炭的硫含量、脱汞能力以及硫损失的影响,探讨载硫活性炭制备的工艺条件优化。结果表明,不同载硫温度下制备的载硫活性炭的气态Hg0吸附能力远强于原料活性炭;载硫温度不同时,负载到活性炭孔隙或表面上的硫的形态不同,导致了脱汞能力的差异,较合适的载硫温度为350℃;S/C为5%(质量分数,下同)时,随着吸附温度的升高,载硫活性炭的气态Hg0吸附量降低;在一定的载硫温度下,原料中S/C越高时,制备的载硫活性炭的硫含量越高、气态Hg0吸附能力越强,但其硫损失率也越高,从实际的使用效果来看,较合适的S/C为10%。     

垃圾渗滤液的加载磁絮凝预处理工艺研究

垃圾渗滤液是一种成分复杂多变的高浓度难处理有机废水。采用加载磁絮凝技术对垃圾渗滤液进行预处理,以提高其可生化性,便于后续生化处理的进行。研究了适宜的磁载体种类、凝聚剂和絮凝剂的加入量,以及不同pH值和药剂投加顺序的影响,并进行了磁絮凝与常规絮凝工艺的对比实验。得到的最优组合工艺为：PAC投加量5.5 g/L,磁载体投加...     

An empirical investigation of construction and demolition waste generation rates in Shenzhen city, South China

The construction and demolition waste generation rates (C&D WGRs) is an important factor in decision-making and management of material waste in any construction site. The present study investigated WGRs by conducting on-site waste sorting and weighing in four ongoing construction projects in Shenzhen city of South China. The results revealed that WGRs ranged from 3.275 to 8.791 kg/m² and miscellaneous waste, timber for formwork and falsework, and concrete were the three largest components amongst the generated waste. Based on the WGRs derived from the research, the paper also discussed the main causes of waste in the construction industry and attempted to connect waste generation with specific construction practices. It was recommended that measures mainly including performing waste sorting at source, employing skilful workers, uploading and storing materials properly, promoting waste management capacity, replacing current timber formwork with metal formwork and launching an incentive reward program to encourage waste reduction could be potential solutions to reducing current WGRs in Shenzhen. Although these results were derived from a relatively small sample and so cannot justifiably be generalized, they do however add to the body of knowledge that is currently available for understanding the status of the art of C&D waste management in China.     

Persistent organic pollutant emissions from medical waste incinerators in China

The huge amount of medical waste (MW) has caused a tough challenge to environmental protection in China because of its serious infectious potential. At present, incineration is the most common technology for MW disposal. Unfortunately, the medical waste incinerator (MWI) is considered one of the major sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study was conducted to investigate the generation and the components of MW; the fingerprint of PCDD/Fs in MWI; and PCDD/F, polychlorinated biphenyl (PCB) and hexachlorobenzene concentrations in residue ash. The estimated annual production of MW was estimated to be 0.97 million tons in China in 2008; in addition, plastic and rubber accounted for 24.5% of MW contents. PCDD/F emissions from MWI could be divided into two main groups according their fingerprints, and the ratio of PCDFs/PCDDs was mostly over 1.5, with a mean value of 3.43. The toxic equivalent of PCDD/Fs was over 30 times that of the value of PCBs in the residue ash, and PCDD/F contents in fly ash accounted for approximately 67% of the total output of PCDD/Fs, which was in line with the UNEP default emission factors for MWI (class 3, 63.7%).