Morphology and composition of particles emitted from conventional and alternative fuel vehicles

Size, morphology, and composition of airborne particles strongly affect human health and visibility, precipitation, and the kinetic characteristics of particles. In this study, the morphology and chemical composition of particles emitted from conventional (diesel and gasoline) and alternative (CNG and methanol) fuel vehicles were characterized through scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The SEM images revealed that the size of primary particles (without agglomeration) was approximately 10 nm in the exhaust from all the tested vehicles. The particles emitted from gasoline vehicle (GV), CNG vehicle (CNGV), and methanol vehicle (MV) had the same median diameter, 62 nm, which was smaller than those from heavy diesel vehicle (HDV) and light diesel vehicle (LDV). Soot was observed in the HDV, LDV, and GV samples but not in the CNGV and MV. The fractal dimension, which was used to quantify the degree of irregularity of soot, was 1.752 ± 0.014, 1.789 ± 0.076, and 1.769 ± 0.006 in the exhaust from HDV, LDV, and GV samples, respectively. The particles discharged by all tested vehicles contained the elements C, O, Fe, and Na. The main element in the samples of HDV, LDV, and GV was C, while O was the main element in the samples of alternative fuel vehicles. The profiles of minor elements were more complex in the emissions of alternative fuel vehicles than those in the emissions of conventional fuel vehicles. The results improved our understanding of the morphology and elemental composition of particles emitted from vehicles powered by diesel, gasoline, CNG, and methanol.

     

Groundwater geochemical signatures and implication for sustainable development in a typical endorheic watershed on Tibetan plateau

Environmental Science and Pollution Research - Groundwater resource is significantly important for sustainable development of the world, especially for arid endorheic watersheds. A total of 28...     

Exploring soil erosion trajectories and their divergent responses to driving factors: a model-based contrasting study in highly eroded mountain areas

Environmental Science and Pollution Research - Soil erosion threatens environmental sustainability worldwide. Exploring the trajectories of soil erosion and associated drivers is of great...     

Ambient air pollution exposure during pregnancy and gestational diabetes mellitus in Shenyang,China: a prospective cohort study

Environmental Science and Pollution Research - The prevalence of gestational diabetes mellitus (GDM) is increasing worldwide. Reports of the association between air pollution exposure and GDM have...     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

Pseudomonas sp. ZXY-1, a newly isolated and highly efficient atrazine-degrading bacterium, and optimization of biodegradation using response surface methodology

Atrazine, a widely used herbicide, is increasing the agricultural production effectively, while also causing great environmental concern. Efficient atrazine-degrading bacterium is necessary to removal atrazine rapidly to keep a safe environment. In the present study, a new atrazine-degrading strain ZXY-1, identified as Pseudomonas, was isolated. This new isolated strain has a strong ability to biodegrade atrazine with a high efficiency of 9.09 mg/L/hr.Temperature, p H, inoculum size and initial atrazine concentration were examined to further optimize the degradation of atrazine, and the synthetic effect of these factors were investigated by the response surface methodology. With a high quadratic polynomial mathematical model(R~2= 0.9821) being obtained, the highest biodegradation efficiency of 19.03 mg/L/hr was reached compared to previous reports under the optimal conditions(30.71°C, pH 7.14, 4.23%(V/V) inoculum size and 157.1 mg/L initial atrazine concentration).Overall, this study provided an efficient bacterium and approach that could be potentially useful for the bioremediation of wastewater containing atrazine.     

基于环境因子和邻近信息的土壤属性空间分布预测

为探索乡镇尺度上土壤属性空间分布预测的最佳方法,以江西省万年县齐埠镇为例,借助四方位搜索法、地统计学和遥感影像分析技术提取环境因子（地形因子和植被覆盖指数）和邻近信息[w（有机质）与w（速效钾）],构建OK法（普通克里金法）、RK1法（仅基于环境因子的回归克里金法）以及RK2法（基于环境因子和邻近信息的回归克里金法）对齐埠镇耕地表层（0~20 cm）土壤w（有机质）、w（速效钾）空间分布进行预测.结果表明:齐埠镇土壤w（有机质）平均值为35.03 g/kg,w（速效钾）平均值为96.73 mg/kg,均为中等空间变异性.对62个样点进行建模,16个测试样点进行独立验证的误差分析表明,RK2法对土壤w（有机质）、w（速效钾）预测结果的均方根误差、平均绝对误差和平均相对误差较OK法分别降低了18.05%、18.01%、21.77%和7.25%、9.49%、9.84%;较RK1法分别降低了22.48%、20.91%、22.02%和9.27%、12.61%、13.52%.研究显示,RK2法明显提高了土壤w（有机质）、w（速效钾）空间分布模拟精度,并且存在改进和提高的空间.      

好氧MBBR处理含吲哚废水的工艺优化试验研究

为了处理制药企业废水中吲哚类有机污染物,采用好氧MBBR(移动床生物膜反应器)工艺对含吲哚废水进行了试验研究,通过考察HRT、曝气量、吲哚冲击负荷等工艺条件对吲哚、COD和NH_4~+-N等去除效果的影响,确定了好氧MBBR反应器的最佳工艺条件。实验结果表明,在HRT在6~18 h变化时,MBBR工艺对吲哚去除率在8 h以上时达到100%,COD去除率在8 h达到89.65%,而NH_4~+-N去除率在12 h达到最高。在曝气量为0.1~0.12 m L/min时,MBBR工艺对COD和NH_4~+-N去除率分别为88.88%~92.95%和65%~66.83%。进水吲哚浓度25~65 mg/L变化时,好氧MBBR对吲哚去除率保持在100%,而对COD和NH_4~+-N去除率也保持在80%和40%以上,表明好氧MBBR工艺在处理难降解有机污染物方面具有显著优势。     

不同主体功能定位的县域空间功能区划研究

文章通过判别分析法,尝试构建一套针对不同主体功能定位县通用的指标体系,以反映社会经济发展状况、生态环境保护重要性、国土空间开发支撑条件。通过在广西10个不同主体功能定位县的实践应用,将县域空间划分为城镇空间、农业空间和生态空间,重点开发区、农产品主产区、重点生态功能区的城镇空间分别小于30%、20%和10%,农产品主产区的农业空间和重点生态功能区的生态空间均大于50%。研究成果为全省范围推广县域空间功能区划提供了科学依据。     

基于LMDI方法的广东省生活能源消费影响因素分析

运用对数平均迪氏分解法(LMDI)构建广东省生活能源消费的因素分解模型,定量分析2000~2014年间能源结构、人口规模、居住面积和设备消费等因素的变化对生活能源消费的影响。研究发现,4种因素的累计效应均为正,而采用逐年效应角度观察,设备消费是生活能源消费增加的最大拉动因素,其次为居住面积。基于研究结果,提出降低居民生活能源消费的相关政策建议。