超高效液相色谱法测定土壤中微量阿特拉津

采用超高效液相色谱仪,建立了土壤中微量阿特拉津的快速检测方法.研究结果表明:采用反相C18色谱柱,以甲醇/水(70:30,v/v)为流动相,流速为0.2 ml/min,柱温为30℃,检测波长为220 nm条件下,在12.5～1000μg/L质量浓度范围内线性关系良好(r=0.9999),检出限0.18×10-3 mg/...     

2013-2017年京津冀区域PM2.5浓度变化特征

利用2013-2017年京津冀区域13个城市PM_2.5监测数据,综合探讨了该区域PM_2.5浓度的时空变化特征。结果表明：京津冀区域PM_2.5污染整体较重,但治理成效显著,2013-2017年区域PM_2.5年均质量浓度分别为106、93、77、71、64 μg/m³,完成《大气污染防治行动计划》PM_2.5浓度下降25%左右的目标;13个城市PM_2.5浓度各百分位数总体呈现下降趋势,且随百分位数增大而下降速率加大,PM_2.5年均质量浓度平均每年下降10.6 μg/m³,污染严重的太行山沿线城市邢台、石家庄、邯郸3个城市平均每年分别下降20.3、16.1、13.9 μg/m³;京津冀区域PM_2.5重度污染天数比例分别为19.9%、16.6%、9.5%、9.0%、7.0%,呈下降趋势。2013-2017年京津冀区域PM_2.5平均质量浓度与非重度污染天相比升高19 μg/m³,PM_2.5重度污染天平均质量浓度较非重度污染天时高244.4%。     

江西省耕地土壤氮素空间变异特征及其影响因素

为定量探讨省域尺度下土壤氮素空间变异特征及其影响因素。以江西省2012年测土配方施肥项目采集的16 582个耕地表层(0~20 cm)土壤样点数据,运用普通克里格、单因素方差分析与回归分析方法,对土壤氮素空间变异特征及其影响因素进行分析。结果表明：（1）江西省土壤全氮(TN)含量在026~375 g/kg之间,平均值为158 g/kg,变异系数为3101%;碱解氮(AN)含量值域范围为1160~39970 mg/kg,平均值为16431 mg/kg,变异系数为3460%;二者均呈中等程度的变异性。（2）经半方差分析,TN与AN的变程分别为31489和3030 km,TN的空间自相关范围大而AN较小。（3）在空间分布上,高值区主要分布在新余市、抚州市与景德镇市。（4）回归分析与单因素方差分析结果表明,地形因子、耕地利用方式、成土母质、土壤类型和秸秆还田方式对土壤氮素空间变异影响极显著(P<001)。秸秆还田方式对土壤TN与AN空间变异的独立解释能力最高,分别为271%与42%,是影响江西土壤氮素空间变异的主要因素。     

燃煤电厂超低排放气态污染物监测技术综述

介绍了燃煤电厂超低排放气态污染物监测系统的采样系统和分析单元,分析了其各自的优缺点。对稀释抽取式、冷干抽取式和热湿抽取式3种采样方法,以及非分散红外吸收法(NDIR)、非分散紫外吸收法(NDUV)、紫外差分吸收法(DOAS)、紫外荧光法(UVF)和化学发光法(CL)5种分析方法进行对比。结果表明,冷干抽取式+紫外差分法以及稀释抽取式+紫外荧光法+化学发光法可以较好地符合燃煤电厂超低排放监测的要求。     

污染土壤中铅的测定方法比对

采用原子吸收光谱法(AAS法)、电感耦合等离子发射光谱法(ICP-OES法)和X-荧光光谱法(XRF法)分别测定污染土壤中的铅,并对检出限、精密度、准确度等指标进行了比对。结果表明,3种方法均能满足质量控制的要求,测定结果之间无显著性差异; 3种方法中ICP-OES法和XRF法可同时测定多元素,但XRF法更快速简便。     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

全国大气背景地区黑碳浓度特征

分析了2015年14个背景站黑碳浓度水平及分布规律,结果表明:我国背景地区黑碳小时浓度均值呈现明显的对数正态分布特征,14个背景站880 nm波长时年均质量浓度为88.7~1 487.6 ng/m~3,小时最大峰值为685.0~13 731.0 ng/m~3,长岛和衡山相对较高;24 h日浓度变化基本呈现"单峰"状,但峰值出现时刻有所不同;工作日和周末的浓度变化趋势基本相似,但浓度高低与所在区域生产生活方式不同而有所差异。初步探讨了风速和风向与浓度污染水平的关系,相对风速而言,风向对黑碳的浓度影响较大,后向轨迹结果也印证了风向的影响。     

生物难降解有机污染物的治理对策

针对废水中难降解化学合成有机污染物的种类和数量不断增加，生物处理出水达标困难的现状，总结了国内外的经验和研究成果，对现有处理装置改造提出了若干建议，并介绍了几种国外废水处理新技术。     

O／W型乳化液的处理

采用药剂破乳－电解破乳工艺处理Ｏ／Ｗ型乳化液，药剂破乳选用聚合硫酸铁为破乳剂，破乳时最佳ＰＨ为８，聚合硫酸铁的最佳投量为１５００ｍｇ／Ｌ，电解破乳选用铁作阳极，铝作阴极，电流密度０．８６Ａ／ｄｍ＾２，极距２５ｍｍ，电解时间３ｈ。在上述条件下，破乳效果良好，出水清澈透明，ＣＯＤ总去除率可达到９６－９７％。