危险化学品活性反应危害及混配危险的规则研究(Ⅱ)

第四类芳香烃 活性特点: 芳香烃化合物的分子里至少含有6个碳原子,并且含氢的比例较脂肪类化合物少得多,为共轭环状结构,非常稳定.     

加热炉炉管穿孔事故处理及原因分析

以一起直接式原油加热炉炉管穿孔事故为例,介绍了事故处理程序,分析了炉管穿孔的原因是由于漏点腐蚀、坑点腐蚀以及炉管管卡损坏导致的,并提出了类似事故防范对策.     

有机气溶胶组分对六氯苯光解的影响

以高压汞灯为光源,分别研究了六氯苯在正己烷和邻苯二甲酸二异辛酯(DIOP)为有机气溶胶表层模拟介质时的光解,发现六氯苯在正己烷和DIOP中的光解半衰期分别约为<5 min和5 h,相差70倍以上.研究发现蒽醌和甲氧酚类气溶胶组分对六氯苯的光解具有光敏化作用,其反应机制可能分别为能量转移和抽氢反应.六氯苯光解的主要产物是五氯酚.     

电极构型对空气阴极生物燃料电池发电性能的影响

在空气阴极生物燃料电池(ACMFC)中,从阴极扩散进入阳极的氧气能够被兼性微生物作为电子受体还原,进而导致电子损失严重.本研究利用葡萄糖作底物,对2种不同电极构型的空气阴极生物燃料电池ACMFC1和ACMFC2的功率输出和电子回收进行了比较研究.结果表明,ACMFC1的内阻为302.14Ω,阳极电位为-323mV,最大功率密度为3 070 mW/m³;ACMFC2的内阻为107.79Ω,阳极电位为-442mV,最大功率密度达到9 800 mW/m³.在间歇条件下,ACMFC2可以连续运行220h,电子回收率为30.1%;而ACMFC1只能运行不到50h,电子回收率为9.78%.因此,合理的设计空气阴极生物燃料电池电极构型可以减小内阻,增大电池电动势进而增大功率输出,提高电子回收率.     

重型柴油车车载排放实测与加载影响研究

采用车载排放测试仪,对2辆重型柴油卡车在空载和加载条件下进行实际道路车载排放测试.通过分析获得了油耗与排放速率的速度-加速度及其工况点的分布,发现高油耗与高排放工况点主要集中在高速加速区域,加载时油耗与排放高值随工况点分布更广;车辆在(30±2.5)km·h^-1等速及加速行驶时受加载影响最大,此时加载油耗与排放约是空载的1.6～3.2倍左右;由实测结果发现,卡车Ⅰ和卡车Ⅱ加载时油耗及CO、HC、NO_x排放因子分别是空载的1.6倍、3.5倍、1.1倍、1.5倍以及1.2倍、1.0倍、0.9倍和1.5倍,加载对油耗与NO_x排放影响最为明显,对HC影响最小,CO影响取决于车辆保养水平;卡车Ⅱ较卡车Ⅰ车型更大,发动机功率更高,相同荷载时受加载影响较小,说明重型车在发动机负荷可承受的范围内合理装载,有助于避免油耗与排放恶化,提高燃油经济性和排放水平.     

Ionic liquid-containing semipermeable membrane devices for monitoring the polycyclic aromatic hydrocarbons in water

Ionic liquid-containing semipermeable membrane devices (IL-SPMDs) were developed to monitor the polycyclic aromatic hydrocarbons in water. Uptake kinetics of naphthalene, 1-methylnaphthalene, phenanthrene, pyrene, chrysene by layflat low-density polyethylene tubing (15 cm x 2 cm) filled with 0.5 ml 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid were studied in a laboratory continuous-flow system for the duration of 16 days. The device concentration factors were in the range of 830-7800 for the studied PAHs. The kinetic parameters of IL/water partition coefficients, analytes uptake rate constants and sampling rates were estimated using mathematical models. These parameters were used in the field experiment to estimate the concentrations of the PAHs in Lanzhou section of Yellow River in China, with the result in comparison with that obtained by triolein-SPMD.     

Effects of riboflavin on the phototransformation of benzo[a]pyrene

Riboflavin (Vitamin B2) is a natural dye-sensitizer habitually present in natural waters. Effects of riboflavin as photosensitizer on the transformation of benzo[a]pyrene (BaP) (10 microM) in the aqueous-organic solvent (water/acetonitrile/methanol 50/40/10) were investigated in this study. The photolysis half life of BaP in solution containing 50 microM riboflavin was 5 min, compared to 98 min in the absence of riboflavin. The rate of phototransformation of BaP increased as the concentration of riboflavin was raised from 10 microM to 100 microM under both natural sunlight and UVA irradiation. The half life of BaP in the presence of 50 microM riboflavin was 10.6 min and 43.1 min when exposed to visible range of natural sunlight and UVA irradiation respectively. Riboflavin decomposes under natural sunlight. Lumichrome, a principal photoproduct of riboflavin, was shown to photosensitize BaP under natural sunlight after photolysis of riboflavin. Our study indicated that other photoproducts from riboflavin, such as lumiflavin, were also involved in the phototransformation of BaP under sunlight when riboflavin diminished. The major photoproducts in the photolysis of BaP were identified as 1,6-benzo[a]pyrene-dione, 3,6-benzo[a]pyrene-dione, 6,12-benzo[a]pyrene-dione by using high performance liquid chromatography (HPLC). All these products were detected in the samples which were irradiated under different light sources and in the presence or absence of riboflavin. The possible phototransformation mechanism was discussed.     

Effect of soil characteristics on Cd uptake by the hyperaccumulator Thlaspi caerulescens

The influence of soil characteristics on the phytoremediation potential of Thlaspi caerulescens is not well understood. We investigated the effect of soil pH and Cd concentration on plant Cd uptake on one soil type, and the variation in Cd uptake using a range of field contaminated soils. On soils with total Cd concentrations of 0.6-3.7 mg kg(-1), T. caerulescens (the Ganges ecotype) produced greater biomass in the pH range 5.1-7.6 than at pH 4.4. The highest plant Cd concentration (236 mg kg(-1)) and Cd uptake (228 microg pot(-1)) were observed at pH 5.1. On soils with total Cd concentrations of 2.6-314.8 mg kg(-1), shoot Cd concentrations were 10.9-1,196 mg kg(-1). Multiple regression analysis indicated that higher Cd in soil, low pH (within the range of >5) and coarser texture were associated with higher Cd concentration and Cd uptake by T. caerulescens.     

Field evaluation of in situ remediation of a heavy metal contaminated soil using lime and red-mud

We evaluated the effectiveness of lime and red mud (by-product of aluminium manufacturing) to reduce metal availability to Festuca rubra and to allow re-vegetation on a highly contaminated brown-field site. Application of both lime and red mud (at 3 or 5%) increased soil pH and decreased metal availability. Festuca rubra failed to establish in the control plots, but grew to a near complete vegetative cover on the amended plots. The most effective treatment in decreasing grass metal concentrations in the first year was 5% red mud, but by year two all amendments were equally effective. In an additional pot experiment, P application in combination with red mud or lime decreased the Pb concentration, but not total uptake of Pb in Festuca rubra compared to red mud alone. The results show that both red mud and lime can be used to remediate a heavily contaminated acid soil to allow re-vegetation.