The chemical forms and ecological risk of As were characterized in the sediment of the Daliao River System (DRS), which has
been affected by long-term intensive industrial, urban, and agricultural activities. Twenty-seven samples of surface sediment
were collected and analyzed for total As content and that of its chemical forms. The results indicated that the average total
As content in the sediment was 9.83 mg kg − 1 but that the levels ranged from 1.57 to 83.09 mg kg − 1. At the sites near cities, mining sites, and the estuary of the DRS, it is likely that adverse effects on aquatic organisms
occur, due to As levels in the sediment that are often higher than the threshold effect level and occasionally higher than
the probable effect level. A selectively sequential extraction indicated that the majority of As in the sediment was bound
to Fe oxides (62.1%), with moderate proportions of residual As (19.8%), specifically adsorbed As (17.9%), and a low proportion
of non-specifically adsorbed As (1.1%). In addition, the content of Fe in the sediment was positively and significantly correlated
with the contents of amorphous and crystalline Fe oxide-bound As, confirming the crucial role of Fe oxides in immobilizing
high amounts of As in superficial environments. The average molar ratio of As to Fe was 1.18 × 10 − 4 in the surface sediment of the DRS, similar to that of natural Fe oxides, but much lower than that of synthesized Schwertmannite.
Therefore, the release of As under reduced and low pH conditions can cause serious problems for water resources and for living
organisms. 相似文献
In this study, MnO2 and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO4, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO2 to prepare modified activated carbon for desulfurization.
Implications: MnO2 and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO2 to prepare modified activated carbon for desulfurizatio. 相似文献
This paper presents a H∞ loop-shaping controller for controlling dc-link voltage by regulating the switching signal of the inverter associated with a grid-connected single-phase photovoltaic system. To facilitate a robust control design, state-space realisation of the system model is made with uncertainties represented by linear fractional transformation. The controller is achieved through H∞ synthesis followed by obtaining desired loop shapes through the choice of the proper weighting functions. The controller order is reduced by Henkel-norm method for facilitating its practical implementation. Controller performance is evaluated through carrying out simulations on MATLAB/Simulink platform under standard and changing atmospheric conditions, and fault condition. 相似文献
The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO2 emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO2 emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO2 emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO2 emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO2 emissions compared to other schemes. Therefore, S8 has a decreased CO2 effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing. 相似文献
Increasingly, epidemiological evidences indicate chemosynthetic perfluorooctanoic acid (PFOA), an environmental pollutant, induces potential adverse effect on human health after long-term exposure. However, less study has been performed for assessment of acute effect of PFOA exposure on metabolic homeostasis. In experimental designs, PFOA-exposed liver cells in vivo and in vitro were used to discuss underlying mechanism related to PFOA-induced metabolic dysfunction. In serological tests, PFOA-exposed mice showed increased treads of liver functional enzymes in alanine transaminase (ALT), aspartate transaminase (AST), and total bilirubin (T-BIL), trypsinase, low density lipoprotein-cholesterol (LDL-C), and insulin, while blood glucose, high density lipoprotein-cholesterol (HDL-C), and glucagon levels were reduced. In histocytological observations, PFOA-exposed liver showed visible cytoplasmic vesicles, and intact pancreatic islets were observed in PFOA-exposed pancreas. Additionally, increased insulin-positive cells and reduced glucagon-positive cells were detected in PFOA-exposed islets. As shown in immunoassays, PFOA-exposed liver resulted in elevations of cluster of differentiation 36 (CD36)-labeled cells and CD36 protein. In mouse liver cell study, PFOA-exposed cells showed increased cell apoptotic count, and increased phosphorylated levels of Bcl-2 and Bad in the cells. Furthermore, PFOA-exposed liver cells exhibited elevations of CD36-labeled cells and CD36 protein. Taken together, the present data demonstrate that acute exposure to PFOA-impaired liver function is associated with inducting CD36 expression and apoptosis, as well as disrupting key hormones in the pancreas. 相似文献
Polybrominated diphenyl ethers (PBDEs) have been extensively used as flame retardants in consumer products. PBDEs rapidly bioaccumulate in the environment, food, wild animals and humans. In this review, we investigated the harmful effects of PBDEs on humans, especially in early life, and summarised the levels of PBDEs in human biological samples (breast milk, cord blood and placentas). In addition, we described the spatiotemporal distribution of PBDEs in this review. PBDE levels in breast milk, cord blood and placentas were generally higher in North America than in other regions, such as Asia, Europe, Oceania and Africa. However, high levels of PBDEs in human biological samples were detected at e-waste recycling sites in South China, East China and South Korea. This finding suggests that newborns living in e-waste regions are exposed to high levels of PBDEs during prenatal and postnatal periods. The time trends of PBDE concentration differed according to the region. Few studies have investigated PBDE levels in humans from 1967 to 2000, but they increased rapidly after 2000. PBDE concentration peaked at approximately 2006 globally. Compared with other PBDE congeners, BDE-47, BDE-153 and BDE-209 were the major components, but the detection rate of BDE-209 was lower than those of others. Future studies should focus on determining the BDE-209 concentration, which requires the implementation of different analytical approaches. Additionally, the levels of PBDEs in human samples and the environment should be monitored, especially in e-waste recycling regions.
Graphical abstract The figures described the spatial distribution of the lowest (Fig. a1) and highest concentration of ∑PBDE (Fig. a2) in different countries by 2006 and described the spatial distribution of the lowest (Fig. b1) and highest concentration of ∑PBDE (Fig. b2) in different countries from 2007 to 2015. All the figures indicated that the levels of PBDEs in North America were substantially higher than those in many regions of Europe, Asia, Oceania, or Africa. Comparing Fig. a1–b1 or Fig. a2–b2, increasing trends were observed in some countries, especially in some regions in China, Korea and Canada.