Impacts of land use change on ecosystem service value in Lijiang River Basin,China

Environmental Science and Pollution Research - It is of great significance for the coordinated development of the environment and the economy to study the impact of the human driving factors of...     

Iodine enrichment and the underlying mechanism in deep groundwater in the Cangzhou Region,North China

Environmental Science and Pollution Research - The lack of information on the origin and behavior of iodine in deep groundwater restricts the development and use of groundwater resources. To...     

Synthesis of Ni-doped anatase TiO2 single crystals loaded on wood-based activated carbon for enhanced photodegradation of triphenylmethane dyes

Environmental Science and Pollution Research - In this work, the Ni-doped anatase TiO2 single crystals loaded on activated carbon (Ni-T/AC) were synthesized by a sol–gel method. The chemical...     

Research progress on the association between environmental pollutants and the resistance mechanism of PARP inhibitors in ovarian cancer

Environmental Science and Pollution Research - The occurrence and progression of ovarian cancer are closely related to genetics and environmental pollutants. Poly(ADP-ribose) polymerase (PARP)...     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

外浮顶原油储罐VOCs泄漏损耗及排放量核算

介绍了国内外浮顶原油储罐VOCs泄漏损耗形式。结合美国环保署(EPA)发布的AP-42中第7章储罐的VOCs相关排放公式,建立了外浮顶原油储罐VOCs排放量核算的方法,并对核算方法的应用进行了举例分析,有助于掌握现阶段原油外浮顶储罐的泄漏损耗量,为推进企业绿色低碳发展,控制原油储罐VOCs总量排放提供参考。     

基于GIS和LUR模型的西安市PM2.5浓度空间分布模拟研究

基于地理信息系统GIS和土地利用回归LUR模型,模拟西安市PM2.5浓度空间动态分布,结果表明:与PM2.5浓度相关性最高的分别为缓冲区为2 km的水域面积、人口密度和距离水域距离,R 2分别为0.501,0.393和0.280;与PM2.5浓度相关性最低的分别为缓冲区为4 km的水域面积、未利用地面积和耕地面积,R 2分别为0.039、0.021和0.017.未考虑风速建立的LUR模型多元回归的相关系数为0.856,R 2为0.733,考虑风速的相关系数为0.892,R 2为0.796,表明风速对于污染物的分布影响较大,LUR模型模拟效果较好.模拟的PM2.5年均浓度高风险区分布于中部,中风险区分布于中西部,低风险区分布于东南部和西部.     

西安市PM2.5燃煤源谱特征研究

针对西安本地源谱缺乏的现状,总结统计了西安目前灰霾特征和主要成因,对西安市燃煤源进行了测定.研究发现,在煤烟尘PM2.5中SO2-4的含量最高(25%),其次为OC(12%)、NH+4(7%)、Cl-(5%).对固定源燃煤与民用散烧煤,不同脱硫方式、脱硝方式和锅炉类型的固定源成分谱分析得出:1.SO2-4及Al、Si、Ca在固定源煤烟尘PM2.5中含量大于民用燃煤,OC与之相反;2.炉内喷钙法PM2.5中SO2-4明显高于其它脱硫法含量;双碱法PM2.5中Na的含量显著高于其它脱硫工艺流程的含量;氧化镁法PM2.5 中Mg含量为各类脱硫工艺中最高;石灰石膏法颗粒物中Mg、Al、Si、Ca等元素含量均高于大多数工艺;3.不同的脱硝工艺中NO-3离子在各类成分谱中的含量极低;4.链条炉与层燃炉PM2.5中OC、EC含量高于循环流化床炉、煤粉炉.     

因子分析在黄河上游干流地区滑坡灾害中的应用

黄河上游地区干流滑坡灾害频繁发生,造成了严重的经济损失和人员伤亡。对该区滑坡灾害进行研究,对于指导该区的抗灾、减灾和预防工作意义重大。采用遥感技术和野外采样实测,获取了研究区的129处滑坡灾害数据,进而对滑坡灾害影响因素进行了因子分析。通过因子分析,得到公因子,并对公因子命名。在此基础上,计算了因子得分及综合得分,并对其进行了排序。研究结果表明:灾害数据变量之间有较强的相关性,滑坡发生主要受到滑体标高因子、滑体外形因子、地表因子、环境因子和滑体性质5个公共因子的影响。滑体标高、环境特征和滑体性质对滑坡的影响较大,滑体外形因素和地表因素对滑坡发生的影响相对较小。     

酸性矿山废水的治理技术现状及进展

酸性矿山废水(AMD)是矿山废水中危害最严重的一类废水,其产生原因和治理技术引起了广泛的重视。介绍了酸性矿山废水的主要产生原因,综述了国内外治理酸性矿山废水技术的研究现状,包括化学法、物理法、生物法、湿地法等,讨论了相关技术存在的问题,并总结了酸性矿山废水技术的新进展和发展趋势。