复合型CoO/TiO2光催化剂降解亚甲基蓝动力学研究

以钛酸四丁酯为前驱体,采用溶胶凝胶法,制备了CoO掺杂的TiO2光催化剂。利用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）、紫外可见漫反射（UV-vis DRS）对催化剂进行了分析、表征。以中压汞灯为光源,研究了亚甲基蓝（MB）在CoO/TiO₂微粒水悬浮液中的降解动力学。结果表明：所制备的催化剂活性组分主要是锐钛矿型的二氧化钛和CoO固溶体,粒径为25～30 nm,分布均匀。亚甲基蓝的光催化降解动力学满足一级动力学,在一定的浓度范围内,反应速率常数随初始浓度增大而减少,适当的掺钴量可以有效地提高TiO₂光催化活性,其最佳掺杂量重量百分比为0.25%。     

Bioconversion of dairy manure by black soldier fly (Diptera: Stratiomyidae) for biodiesel and sugar production

Modern dairies cause the accumulation of considerable quantity of dairy manure which is a potential hazard to the environment. Dairy manure can also act as a principal larval resource for many insects such as the black soldier fly, Hermetia illucens. The black soldier fly larvae (BSFL) are considered as a new biotechnology to convert dairy manure into biodiesel and sugar. BSFL are a common colonizer of large variety of decomposing organic material in temperate and tropical areas. Adults do not need to be fed, except to take water, and acquired enough nutrition during larval development for reproduction. Dairy manure treated by BSFL is an economical way in animal facilities. Grease could be extracted from BSFL by petroleum ether, and then be treated with a two-step method to produce biodiesel. The digested dairy manure was hydrolyzed into sugar. In this study, approximately 1248.6 g fresh dairy manure was converted into 273.4 g dry residue by 1200 BSFL in 21 days. Approximately 15.8 g of biodiesel was gained from 70.8 g dry BSFL, and 96.2 g sugar was obtained from the digested dairy manure. The residual dry BSFL after grease extraction can be used as protein feedstuff.     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.     

Dechlorination and conversion mechanism of trichlorobenzene as a model compound of chlorine-containing wastes by different base-catalyzed combinations

Environmental Science and Pollution Research - Chlorine-containing organic waste (COWs) is a big threat for the waste incineration because of the dioxin generation and equipment corrosion....     

Mg3MnxAl1-xCO3类水滑石衍生NSR催化剂的制备及其性能评价

采用共沉淀法合成了三元类水滑石Mg_3Mn_xAl_(1-x)CO_3,通过高温煅烧得到其衍生氧化物Mg_3Mn_xAl_(1-x)O_m,再经浸渍负载Pt或BaO后制得新型NO_x存储/再还原(NSR)催化剂。XRD及SEM表征结果显示,当Mn与Al的摩尔比(Mn/Al)大于1时所制备的Mg_3Mn_xAl_(1-x)O_m有杂晶相出现且发生团聚,结合NO_x存储性能评价结果,确定最优Mn/Al为1。BaO负载不利于NO_x的存储,而当Pt负载量为1%(w)时NO_x存储性能最优,250℃条件下的存储量由负载前的0.52 mmol/g提升至0.61 mmol/g。CO_2与NO_x之间存在较强的竞争吸附。负载1%Pt催化剂的NSR性能评价结果表明,8个稀燃-富燃循环后NO_x的去除率为68%,表明催化剂的还原性能仍需加强。     

磁性生物炭负载Mg-Fe水滑石的制备及其吸附水中Cd（Ⅱ）和Ni（Ⅱ）的性能

合成了一种高吸附容量的磁性生物炭负载Mg-Fe水滑石复合材料（L-BC）,并用于去除水中的Cd²⁺和Ni²⁺。表征结果表明,采用浸渍联合热解法成功制备了磁性生物炭（M-BC）,水热合成法成功地将Mg-Fe水滑石负载在M-BC上。动力学研究结果表明,Cd²⁺和Ni²⁺吸附符合伪二级动力学模型,化学吸附为速率控制步骤。等温吸附研究结果表明,L-BC对Cd²⁺和Ni²⁺的吸附符合Langmuir模型,为单分子层化学吸附,最大吸附量分别为263.156 mg/g和43.291 mg/g。吸附机理主要为Mg-Fe水滑石层间CO₃^2-和表面羟基与Cd²⁺和Ni²⁺产生表面共沉淀。L-BC具有良好的吸附和重复利用性能,是一种很有前景的去除Cd²⁺和Ni²⁺的吸附材料。     

水质凯氏氮标准样品的研究

提出了水质凯氏氮标准样品的研究方法。在研究过程中，完成了样品的配制、均匀性、稳定性等工作。经过多家实验室协作定值，确定了样品的标准值及不确定度，并提供使用。     

Zr掺杂TiO_2介孔材料光催化降解头孢氨苄

采用固相合成法制备了Zr掺杂TiO_2(Zr-TiO_2),运用XRD技术对其进行了表征,并将其用于水中头孢氨苄的光催化降解,通过单因素实验及正交实验优化了光催化反应条件。结果表明:制备的Zr-TiO_2为锐钛矿型介孔材料,孔径约为8.12 nm;各因素对头孢氨苄去除率的影响由大到小依次为光照时间、Zr-TiO_2投加量、初始头孢氨苄质量浓度;在Zr-TiO_2投加量为1.5 g/L、初始头孢氨苄质量浓度为10 mg/L、溶液pH为7.0、光照(300 W UV)时间为1.5 h的优化条件下,头孢氨苄去除率高达99.46%;Zr-TiO_2光催化剂的重复使用性能良好。     

负载TiO2浮石对污水处理厂二沉池出水的矿化与灭菌研究

城市污水处理厂第二沉淀池出水的污染物浓度较低,经过矿化及灭菌等深度处理后可以回用,从而减轻对淡水资源的需求。本实验采用溶胶-凝胶法制备了负载TiO2的浮石光催化剂,对城市污水处理厂第二沉淀池出水进行了矿化及灭菌处理研究。采用低压汞灯对处理水样照射2h,有机物降解率可以达到50％,灭菌效率达到100％。处理后的水可以作为农作物灌溉、城市绿化和娱乐用水。负载在浮石表面的TiO2薄膜经过10次的光催化循环实验后,没有明显破损,可以再次循环使用。TiO2浮石具有质轻、机械性能好和价格低等优点,该方法处理废水的适用浓度低,可以广泛应用于微污染水和城市污水处理厂出水的深度处理。     

A highly resolved temporal and spatial air pollutant emission inventory for the Pearl River Delta region, China and its uncertainty assessment

A highly resolved temporal and spatial Pearl River Delta (PRD) regional emission inventory for the year 2006 was developed with the use of best available domestic emission factors and activity data. The inventory covers major emission sources in the region and a bottom–up approach was adopted to compile the inventory for those sources where possible. The results show that the estimates for SO₂, NO_x, CO, PM₁₀, PM_2.5 and VOC emissions in the PRD region for the year 2006 are 711.4 kt, 891.9 kt, 3840.6 kt, 418.4 kt, 204.6 kt, and 1180.1 kt, respectively. About 91.4% of SO₂ emissions were from power plant and industrial sources, and 87.2% of NO_x emissions were from power plant and mobile sources. The industrial, mobile and power plant sources are major contributors to PM₁₀ and PM_2.5 emissions, accounting for 97.7% of the total PM₁₀ and 97.2% of PM_2.5 emissions, respectively. Mobile, biogenic and VOC product-related sources are responsible for 90.5% of the total VOC emissions. The emissions are spatially allocated onto grid cells with a resolution of 3 km × 3 km, showing that anthropogenic air pollutant emissions are mainly distributed over PRD central-southern city cluster areas. The preliminary temporal profiles were established for the power plant, industrial and on-road mobile sources. There is relatively low uncertainty in SO₂ emission estimates with a range of −16% to +21% from power plant sources, medium to high uncertainty for the NO_x emissions, and high uncertainties in the VOC, PM_2.5, PM₁₀ and CO emissions.