Analysis of the mechanism of the impact of internet development on green economic growth: evidence from 269 prefecture cities in China

As the digital economy develops rapidly and the network information technology advances, new development models represented by the network economy have emerged, which have a crucial impact on green economic growth. However, the relevant previous studies lacked the role of analyzing the direct and indirect effects of internet development on green economic growth at the prefecture-level city level. For this purpose, this paper aims to examine the intrinsic mechanism of the impact of internet development on green economic growth and provide empirical support for cities and regions in China to increase internet construction. Furthermore, the mixed model (EBM), which includes both radial and non-radial distance functions, is applied to calculate the green economic growth index. Fixed effect model and mediation effect model are also employed to test influence mechanisms of the internet development on green economic growth using panel data of 269 prefecture-level cities in China from 2004 to 2019. The statistical results reveal that internet development has contributed significantly to green economic growth. When the internet development level increases by 1 unit, the green economic growth level increases by an average of 5.0372 units. However, regional heterogeneity is evident between internet development and green economic growth, that is, the promoting effect of internet development on green economic growth is gradually enhanced from the eastern region to the western region. We also find that internet development guides industrial structure upgrading improves environmental quality and accelerates enterprise innovation, which indirectly contributes to green economic growth. And internet development mainly achieves green economic growth through enterprise innovation. Based on the above findings, we concluded that policymakers should not only strengthen the guiding role of social actors to promote the stable development of the internet industry, but also foster the construction of the three models of “internet+industry integration,” “internet+environmental governance,” and “internet+enterprise innovation” to promote green economic growth.

     

掘进面出风口风流与风幕调控下的粉尘分布响应曲面优化研究*

为了解决煤矿掘进面风筒出风口参数不能动态变化,而传统风幕全断面控尘效果不理想引起的粉尘浓度高等问题,通过分析风幕和出风口参数对粉尘分布规律的影响,以此得到合理的出风口风流与风幕综合调控方案,降低粉尘浓度。以陕西神木柠条塔煤矿N1212巷道为研究对象,利用Fluent软件建立出风口风流与风幕综合调控的粉尘场有限元模型,设计出风口风流及风幕综合调控响应曲面实验,得到最佳综合调控方案为:风幕射流出口宽度为0.16 m,风幕射流出口速度为6 m/s,出风口口径为0.9 m,出风口右偏角度为3°。搭建相似模拟实验平台来验证最佳综合调控方案,研究结果表明:调控后回风侧行人呼吸处和司机位置处粉尘平均浓度分别降低89%和81%,有效改善掘进面作业环境。     

附加电场对中空纤维膜污染的减缓作用

通过对新型附加电场的中空纤维膜组件的实验室研究,探讨了电场对缓解微滤膜污染的作用.在恒定流量下过滤含有20mg/L腐殖酸的原水,无电压时,跨膜压力从0.0200MPa上升到0.0300MPa耗时2h,而施加60V电压时该时间段延长至10h.研究表明,原水中的腐殖酸在电场中发生电泳迁移,减少了向膜表面的移动,其对膜的污染被减缓;同时腐殖酸在电场中发生凝聚现象,沉积在膜表面形成疏松的滤饼层,是跨膜压力增加缓慢的另一原因.     

表面活性剂异位淋洗法修复石油污染土壤

综述了表面活性剂在石油污染土壤修复中的应用情况,介绍了表面活性剂的卷缩和增溶作用机理,分析了在异位淋洗修复中的表面活性剂浓度、复配等影响因素,并对表面活性剂在石油污染土壤修复领域的研究和应用前景进行了展望。     

枯草芽孢杆菌胞外蛋白酶突变株的筛选及其拮抗作用

从小麦根际土壤中分离到一株对多种植物病原真菌有拮抗作用且产蛋白酶的枯草芽孢杆菌 Bacillus subtilis T2.经紫外线(UV)和硫酸二乙酯(DES)诱变处理,获得具有良好遗传稳定性的蛋白酶正负突变株.与出发菌株相比,培养48 h的正突变株胞外蛋白酶活力提高108.5%,负突变株蛋白酶活力降低81.1%,而二者的几丁质酶和β-1.3-葡聚糖酶活力均无显著变化.正突变株对棉花枯萎病菌(Fusarium oxysporum f. Sp. Vasinfectum)的平板拮抗作用增强,其粗酶液可使该菌菌丝变形膨大成珠状、原生质浓缩,萌发的孢子芽管短且畸形膨大;负突变株对该菌的平板拮抗作用显著降低,粗酶液对该菌菌丝和孢子的形态无明显作用.表明提高生防芽孢杆菌胞外蛋白酶的活力可增强其拮抗病原真菌的能力.     

空心玻璃微珠对泡沫灭火剂发泡能力和热稳定性影响研究

本文研究了空心玻璃微珠添加量及泡沫液浓度对泡沫灭火剂发泡能力和稳定性的影响,对比了热辐射条件下空心玻璃微珠添加前后泡沫的热稳定性.结果表明,添加量低于40%时,空心玻璃微珠对泡沫灭火剂发泡能力影响不大,而泡沫的稳定性显著降低,添加量为50%时,虽泡沫发泡能力降低,但泡沫的稳定性却增强.泡沫的发泡能力随蛋白泡沫浓度升高而增强.蛋白浓度为10%,空心微珠添加量为50%时,由于泡沫内部形成了稳定的三相泡沫骨架结构,泡沫热稳定性较未添加微珠之前显著增强.     

过电位抛光增材制造双极板流道结构及性能研究

目的 研究过电位抛光对不锈钢异形截面微流道内壁成形性及双极板性能的影响。方法 采用电化学实验、扫描电子显微镜（SEM）、粗糙度测试分别对激光粉末床熔融技术成形异形截面微流道进行测试分析,研究抛光时间对微流道内壁表面形貌、典型缺陷、表面粗糙度及双极板耐腐蚀性的影响。结果 在抛光前10 min,微流道内壁的质量得到有效提升,随着抛光时间的延长,其表面粗糙度达到稳定值,同时典型缺陷也由黏粉、半熔金属颗粒等局部缺陷逐渐变化到球化、挂渣、阶梯效应等大范围缺陷,直至出现点蚀现象。抛光时间在5～15 min内,LPBF成形316L不锈钢表面质量提升,随着抛光时间的增加,其耐腐蚀性下降。结论 采用过电位抛光工艺并选择适当的过电位抛光时间,能有效提升微流道内壁成形质量及双极板耐腐蚀性能。     

胞外聚合物结合磷效能的研究

以实验SBR反应器的活性污泥为研究对象,探讨了超声波-树脂法提取EPS的方法与程序;以5种不同来源的活性污泥为研究对象,考察了EPS结合磷的效能.结果表明,超声波-树脂法分离EPS和细菌细胞的较优程序为：采用21kHz、40W超声波作用60mL污泥2min（VSS约为8000mg·L-1）;然后,投加80g·g-1（以...     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.     

内分泌干扰物4-叔丁基苯酚在水中的氯化动力学研究

对典型内分泌干扰物4-叔丁基苯酚（4-TBP）在水中的氯化反应动力学进行了研究.结果发现,在不同HOCl初始浓度和pH条件下,4-TBP能够迅速被氯氧化,4-TBP的氯化反应符合二级反应动力学.表观速率常数k_app与pH值有关,在pH为5和9左右时,k_app分别达到最小值和最大值;对氯化反应中的每一个基元反应的反应速率常数进行了计算, HOCl与4-TBP的酸催化反应及ClO^-与4-TBP反应的速率常数分别为4.99×10⁶　L²·（mol²·min）^-1和1.96×10⁴　L·(mol·min)^-1,而HOCl与4-TBP的反应及HOCl与4-TBP^-的反应较慢,4-TBP^-与ClO^-不发生反应.水处理中氯消毒工艺对4-TBP的降解有一定的影响,在氯投加量为3 mg/L时,4-TBP的半衰期为12.1　min.