21世纪可替代脊椎动物进行生态毒性测试的方法：过去二十年的发展和现状综述

替代脊椎动物进行化学物质和污染物危害评估的方法已成为越来越重要的需求。现在首先要考虑的是当启动一个脊椎动物生态毒性测试,必须确保不必要的脊椎动物生物的使用尽可能最小化。对于一些监管目的,脊椎动物的使用对环境风险评估(ERA)已经被禁止,而在其他情况下生物测试的数量已经大大减少了,或者测试程序严格精简了。然而,想要获得能够完全替代脊椎动物提供环境危害数据的方法仍有很长的路要走。动物替代品的发展不仅仅是基于道德的考虑,也可以降低执行脊椎动物生态毒性测试的成本以及在某些情况下能够提供更好的信息旨在改进环境风险评估。本文集中综述了在过去的几十年里生态毒性评估替代方法所发生的重大的进展。
精选自Adam Lillicrap, Scott Belanger, Natalie Burden, David Du Pasquier, Michelle R. Embry, Marlies Halder, Mark A. Lampi, Lucy Lee, Teresa Norberg-King, Barnett A. Rattner, Kristin Schirmer, Paul Thomas. Alternative approaches to vertebrate ecotoxicity tests in the 21st century: a review of developments over the last two decades and current status. Environmental Toxicology and Chemistry: Volume 35, Issue 11, pages 2637–2646, November 2016. DOI: 10.1002/etc.3603
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3603/full
     

Improved blending strategy for membrane modification by virtue of surface segregation using surface-tailored amphiphilic nanoparticles

Membrane modification is one of the most feasible and effective solutions to membrane fouling problem which tenaciously hampers the further augmentation of membrane separation technology. Blending modification with nanoparticles (NPs), owing to the convenience of being incorporated in established membrane production lines, possesses an advantageous viability in practical applications. However, the existing blending strategy suffers from a low utilization efficiency due to NP encasement by membrane matrix. The current study proposed an improved blending modification approach with amphiphilic NPs (aNPs), which were prepared through silanization using 3-(Trimethoxysilyl)propyl methacrylate (TMSPMA) as coupling agents and ZnO or SiO₂ as pristine NPs (pNPs), respectively. The Fourier transform infrared and X-ray photoelectron spectroscopy analyses revealed the presence of appropriate organic components in both the ZnO and SiO₂ aNPs, which verified the success of the silanization process. As compared with the pristine and conventional pNP-blended membranes, both the ZnO aNP-blended and SiO₂ aNP-blended membranes with proper silanization (100% and 200%w/w) achieved a significantly increased blending efficiency with more NPs scattering on the internal and external membrane surfaces under scanning electron microscope observation. This improvement contributed to the increase of membrane hydrophilicity. Nevertheless, an extra dosage of the TMSPMA led to an encasement of NPs, thereby adversely affecting the properties of the resultant membranes. On the basis of all the tests, 100% (w/w) was selected as the optimum TMSPMA dosage for blending modification for both the ZnO and SiO₂ types.

Open image in new window

     

治霾背景下浅层地温能产业规模化发展研究

为了实现治霾目标,国家大力推广可再生能源应用,《关于促进地热能开发利用的指导意见》(国能新能[2013]48号),明确提出将积极推广浅层地温能,扩大其在城镇建筑用能中的比例。我国浅层地温能产业发展面临一系列障碍,为了克服市场调节失灵问题,借助事物发展动力原则,结合全寿命周期理论,依托层次分析法,推导能源发展的核心影响因素,据此提出了浅层地温能产业规模化发展的关键路径,构建了浅层地温能开发利用的长效管理体系。     

水溶性吸收剂对甲苯废气的吸收性能

液体吸收法应用于处理工业有机废气涉及到2个关键因素,即吸收剂的选择与吸收液的再生处理. 选择8种水溶性吸收剂——2种氟碳表面活性剂(FSO100和FSN100)、2种非离子表面活性剂〔TW80(吐温80)和SP20(斯盘20)〕、2种阴离子表面活性剂〔脂肪醇聚氧乙烯醚硫酸钠(AES)和脂肪醇聚氧乙烯醚羧酸钠(AEC)〕及2种类表面活性剂〔β-CD(β-环糊精)和SA(乙酸钠), 对模拟甲苯废气进行了动力学吸收试验,研究吸收性能和加热蒸馏法对甲苯回收与吸收剂溶液再生的可行性. 结果表明:吸收剂类型是影响甲苯吸收能力的最主要因素. 2种氟碳表面活性剂吸收液的甲苯吸收能力最强,其次是SP20与AES,而其他4种吸收剂溶液对甲苯的吸收能力很弱. 上述3类吸收剂对甲苯的初始去除率分别为80%～90%、75%左右与60%～70%,甲苯饱和吸收浓度(以w计)分别为0.58～3.45、0.38～1.44与0.14～1.01 mg/g. 除TW80吸收液热稳定性差、不宜采用加热蒸馏方法再生外, 其他吸收剂溶液经5次重复使用,甲苯回收率可达70%～85%,并能保持其原有吸收性能. 甲苯分配系数计算结果表明,FSO100和FSN100分别为0.41、0.62, SP20和AES分别为0.76、0.95, 其他4种吸收剂溶液在1.12～3.54之间;甲苯分配系数与饱和吸收浓度呈负相关、与体积传质系数呈正相关. 因此,2种氟碳表面活性剂吸收液对甲苯的吸收能力强,加热蒸馏法回收甲苯与再生吸收液具有经济性,用于处理甲苯废气具有广泛的应用前景.      

张集矿综采工作面瓦斯治理措施及效果分析

张集矿属于煤与瓦斯突出矿井,针对目前所开采的17266工作面地质构造条件复杂、瓦斯涌出量大、处于突出危险区等瓦斯治理难题,采取"风排瓦斯、高抽巷穿层钻孔抽采、运输巷、回风巷顺层钻孔抽采和上隅角埋管抽采"等瓦斯综合治理措施,用分源预测法得出工作面绝对瓦斯涌出量为30.3 m3/min。结果表明,工作面的主要瓦斯涌出来源为本煤层瓦斯涌出。工作面风排瓦斯量11.0 m3/min,工作面瓦斯抽采率达63.0%以上。     

节能耐磨型电梯导靴靴衬应用研究

很多电梯使用的导靴靴衬存在容易磨损的问题,从而导致电梯运行中的抖动和不平稳现象,影响乘坐的舒适性。常用的靴衬材料摩擦系数偏大,造成电梯运行过程中摩擦力偏大,能耗增加。因此对这类电梯的导轨与导靴间的摩擦行为进行研究,将新型复合材料应用于电梯靴衬,实现减摩以降低能耗,提升靴衬的耐磨性,延长使用寿命,降低成本,具有较大的实际意义和应用价值。     

某湿地生态保护区水体中铜的生态风险评价及管理限值研究

铜是生物必需的微量元素,但过量暴露会对生物产生毒害效应。针对我国南方城市某湿地生态保护区水体重金属污染问题,参照《澳大利亚和新西兰淡水和海水水质指南》,应用物种敏感度分布(speeies sensitivity distribution,SSD)方法和联合概率曲线(joint probability curve,JPC)方法评价水体中铜的生态风险评价,在此基础上提出水体中铜浓度的管理限值。根据该湿地生态保护区生物调查历史数据以及其他文献数据,整理了415个本地物种的清单,通过美国环境保护署ECOTOX数据库以及其他文献共获取了13个物种的毒性数据,构建了Weibull分布、对数正态分布、正态分布、对数Logistic分布、Logistic分布、BurrⅢ型分布和Gumbel分布等7个SSD模型。结果表明,利用13个本地物种铜毒性数据构建的SSD模型具有合理性,不同模型计算得到的湿地生态保护区水体中铜的总体风险期望值为0.054~0.121。其中,BurrⅢ型分布模型的拟合效果最好,据此推导得到以保护水生生态系统为目标的铜的高可靠性与中等可靠性触发值分别为2.55μg·L~(-1)和1.41μg·L~(-1)。考虑到管理目标的可达性和现状的生态风险水平,提出该湿地生态保护区水体中铜浓度的管理限值为3μg·L~(-1)。     

农药助剂对蚯蚓(Eisenia foetida)的急性毒性

为评价农药助剂对土壤生物的毒性效应,分别采用滤纸接触法和人工土壤法测定了不同类别农药助剂对赤子爱胜蚓(Eis enia foetida)的急性毒性.结果表明:19种非离子表面活性剂中,烷基酚聚氧乙烯醚与脂肪醇聚氧乙烯醚毒性较高,滤纸法48 h-LC50为7.630 ～ 39.65μg·cm-2,人工土壤法14 d-LC50为876.5 ～2 786.6 mg· kg-1,其它类型非离子表面活性剂毒性较低.5种阴离子表面活性剂中,十二烷基硫酸钠、十二烷基苯磺酸钙毒性高于木质素磺酸钠、木质素磺酸钙、亚甲基双萘磺酸钠,滤纸法48 h-LC50为6575 ～ 41.89 μg· cm-2,人工土壤法14 d-LC50为1 195.0～1 911.7 mg·kg-1.13种溶剂中,二甲苯、乙苯、甲苯、正丁醇、环己酮表现出较高的毒性,滤纸法48 h-LC50为6.587 ～ 57.62 μg ·cm-2,密封人工土壤法48 h-LC50为181.9 ～781.5 mg·kg-1.采用两种方法测得的5种填料高岭土、白炭黑、硅藻土、凹凸棒土和轻质碳酸钙的毒性均较低.采用两种方法测得的毒性系统偏差接近,重现性均较好,并且滤纸接触法测得的毒力高于人工土壤法.     

毒死蜱对我国南方稻区水域中12种淡水鱼的毒性

毒死蜱作为稻田常用农药,普遍存在于稻区沟渠、池塘和河流中,从而对生活在其中的鱼类具有潜在风险。通过短期暴露试验,比较了毒死蜱在纯水、水-沉积物体系中对淡水鱼的毒性效应,进一步研究了毒死蜱在不同鱼体内的生物富集作用,以及对鱼脑Ach E活性的影响。试验结果表明:毒死蜱对12种淡水鱼均表现为高毒或剧毒,最敏感的是太阳鱼,但体系中沉积物的存在会通过吸附作用降低农药对鱼类的毒性;毒死蜱在鱼体内表现为中等或高富集性,其中斑马鱼的富集系数最大;毒死蜱对鱼脑Ach E酶活性有明显抑制作用,其中以虹鳟最敏感。研究结果为稻田常用农药对水生态环境中鱼类安全的风险性评价提供了科学依据。     

Characterization and Release Kinetics of Allylthiosufinate and its Transforments from Poly(d,l-Lactide) Microspheres

In this work was described poly(d,l-lactide) microwave synthesis using tin(II) 2-ethylhexanoate initiated ring-opening polymerization. Polymerization was performed at 100 °C with monomer to initiator molar ratio ([M]/[I]) of 5,000 in 30 min. The achieved number average molar mass of obtained polymers (determined by gel permeation chromatography) was 102,320 g/mol, with the polydispersion index, Q, 2.80. Structural characterization was performed by FT-IR spectroscopy followed characteristic bands. For applicative purposes the obtained polymer was purified during the procedure of microsphere preparation. Biodegradable microspheres prepared from poly(d,l-lactide) have been widely studied in recent years and have become well established controlled drug delivery systems. In this work microspheres were loaded with allyl thiosulfinate (allicin) and its transforments products (ajoene and vinyldithiine), as pharmacological active substances. The morphology of the microspheres was analyzed using a scanning electron microscope. Allicin was synthesized by acid oxidation of allyl disufide and purification of obtained products by liquid–liquid extraction with diethyl ether. Obtained allicin, purity 73%, was transformed using microwave in acetone solution, at solvent boiling temperature, for 5 min. For the quality and quantity analysis of allicin and its transformation process was used LC/MS chromatography. (E)- and (Z)-ajoene were detected at retention time 3.1 and 3.3 min, respectively, whence 3-vynil-4H-1,2-dithiine and 2-vynil-4H-1,3-dithiine were detected at 4.3 and 4.8 min, respectively. Retention time of allicin was 2.93 min, according to liquid chromatography results. HPLC method was used for assessment of pharmaceutical substances (alicine and alicine transforments) releasing from microspheres at room temperature in solutions with different pH (pH = 3 and pH = 8) for 24 h.