UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Transformation of hazardous lead into aluminosilicate ceramics: structure evolution and lead leaching

This study investigated crystallization mechanisms for the formation of lead aluminosilicate by sintering lead stabilization with kaolin-based precursors. PbAl2Si2O8 was found to be the only stable lead aluminosilicate in low-PbO system and demonstrates its highly intrinsic resistance to acid attack in leaching test. A three-stage PbAl2Si2O8 formation mechanism was supported by the results of the changing temperature in the system. Amorphization of sintered products was observed in both PbO/kaolinite and PbO/mullite systems at 600–700°C. When the temperature was increased to 750–900°C, the crystallochemical formation of lead aluminosilicates (i.e., Pb4Al4Si3O16, Pb6Al6Si2O21, and PbAl2Si2O8) was observed. Pb4Al4Si3O16 and Pb6Al6Si2O21 were found to be the intermediate phases at 700–900°C. Finally, PbAl2Si2O8 was found to be the only crystallite phase to host Pb at above 950°C. A maximum of 80% and 96.7% Pb can be incorporated into PbAl2Si2O8 in PbO/kaolinite and PbO/mullite systems, respectively, but the final products exhibited different microstructures. To reduce environmental hazard of lead, this strategy demonstrated a preferred mechanism of immobilizing lead into PbAl2Si2O8 structure via kaolin-based precursors.     

Molecular,functional, and cellular alterations of oocytes and cumulus cells induced by heat stress and shock in animals

Environmental Science and Pollution Research - Global warming is considered as the main environmental stress affecting ecosystems as well as physiological and biochemical characteristics, and...     

基于暂态零序电流法的站内电缆监测系统及验证试验

及时发现变电站内电力电缆的故障对保证变电站安全稳定运行具有重要意义。介绍了1种基于暂态零序电流法的站内电缆监测系统,对系统的监测原理和各部件参数要求进行了论述,并采用单相失压模拟试验和人工单相接地试验对电缆线路监测系统进行了验证。试验结果表明,该系统可以准确地采集电缆线路故障发生时的暂态零序电流,并能及时将故障报警信息上报运维人员,保证变电站安全稳定运行。     

750kVGIS隔离开关用绝缘拉杆炸裂原因分析

盆式绝缘子、绝缘拉杆、支柱绝缘子等绝缘件作为GIS设备内部重要的绝缘、传动部件,故障率仅次于异物放电。通过绝缘拉杆运动特性分析、X射线成像检测、异物分析、微观分析、电场仿真分析等方法,对一起750 kV GIS 设备隔离开关交接试验过程击穿炸裂进行分析。针对分析结果给出了隔离开关的故障原因为连接机构侧的绝缘管粘接面加工操作不当造成了绝缘管层间疏松,导致粘接面存在气隙缺陷,缺陷逐渐延伸扩展,最终诱发绝缘拉杆层间连续放电通道。     

一起800kV罐式断路器内部故障原因分析

介绍了一起某变电站7530断路器内部闪络故障,结合现场检查、电气试验、故障录波情况确认故障点,通过气体成分及放电产物分析、故障部件电场仿真等手段综合分析800 kV罐式断路器故障原因,并提出了处理措施及建议。     

基于源网荷互动的分布式能源消纳方法

分布式能源发电的不确定性给电网公司消纳新能源带来了极大的挑战,电力物联网全域感知技术为分布式能源消纳提供了有效的数据支撑,故提出了一种基于源网荷互动的分布式能源消纳方法,构建了分布式能源总功率预测方法,采用自回归移动平均算法对新能源发电功率进行预测,并建立分布式能源发电波动影响因子,分析新能源发电波动对电网带来的影响。根据源网荷的互动情况,采用离群点自趋优算法,实现新能源机组有功功率精准控制,有效推动分布式能源的消纳。仿真验证表明：采用离群点自趋优的新能源机组控制算法能根据电网运行情况,自动调控分布式能源、电网资源,实现分布式能源最大化消纳,有效提高了园区分布式能源的经济运行水平。     

混凝土空心楼盖板柱增强节点抗震性能试验研究∗

为研究空心楼盖板柱增强节点的抗震性能,进行了3个板柱节点在低周往复荷载作用下的拟静力试验,对节点的承载能力、开裂模式、破坏形态、滞回曲线、位移延性、刚度退化和耗能能力等进行了较为系统的研究。结果表明：平行布管方式下空心板柱节点的承载力、刚度、耗能能力和刚度退化等抗震性能指标均优于正交布管方式布管下的板柱节点;配置型钢剪力架能显著提高空心楼盖板柱节点承载力与抗震性能,配置弯起钢筋对节点抗震性能提高的作用不明显。建议工程应用时综合考虑空心楼盖板柱节点的抗冲切与抗震需求来选择增强元件,同时根据建筑平面布局和抗侧力结构布置等情况,合理选择空心芯管的布置方向,以提高结构整体抗震性能。研究成果可为采用空心管（或柱状芯材）的空心楼盖板柱结构的研究和应用提供参考。