Effectiveness of amendments on re-acidification and heavy metal immobilization in an extremely acidic mine soil

Previous studies have shown that the application of soil amendments is efficient in reducing acidity and heavy metal bioavailability in mine soils. However, it remains a challenge for environmentalists to predict accurately and control economically the re-acidification in re-vegetated mine soils. In this study, net acid generation (NAG) test and bioassay technique were employed to assess the effectiveness of the amendments [including lime, N-P-K (nitrogen, phosphorous and potassium) fertilizer, phosphate and river sediment] on re-acidification and heavy metal immobilization in an extremely acid (pH < 3) mine soil. Our results suggested that NAG test was a rapid and accurate approach to assess the effectiveness of the amendments on re-acidification potential of the mine soil. Interestingly, it was found that phosphate and river sediment played quite specific roles in preventing the re-acidification in the mine soil. In addition, the results also indicated that the addition of 25 t ha(-1) lime combined with river sediment (30%) might be an economical method to successfully control the acidification and re-acidification in the extremely acid mine soil, allowing the re-establishment of the plants. Collectively, our results implied that the combined use of NAG test and bioassay assessment was effective in evaluating a reclamation strategy for extremely acidic mine soils.     

雨凇环境影响因子研究与应用——以湖南省为例

运用概率论和数理统计方法,基于湖南气象观测资料、NCEP资料及地理信息资料,分析了气象因子、地理因子对雨凇天气形成的影响,揭示了各影响因子的临界影响点。进而分析了主要影响因子位于不同影响点时其它因子对雨淞天气形成的作用,在此基础上,研制了基于气象要素因子、地理因子的雨凇日数学模型。选取平均连续雨凇日数、年平均雨凇日数、雨凇最长持续时间等3项与雨凇日数有关的气候指标对模型模拟结果进行了检验,结果表明模型模拟结果与实际观测结果相关性高,均值差异小。雨凇日模型已被用于精细化的雨凇气候区划。     

Numerical Simulation of Light/Dark Cycle Frequency of Microalgae Fluid in a Helical Tubular Photobioreactor for Carbon Dioxide Capture

In the present study, three-dimensional numerical simulations are conducted on hydrodynamics and light-intensity distribution of microalgae fluid flow in a helical tubular photobioreactor for CO₂ capture. The effect of incident direction of the light illumination is discussed and the light/dark cycle frequency experienced by the microalgae fluid in the cross-section of the photobioreactor is investigated. The simulation results reveal the steadily nonhorizontal and unsymmetrical Dean roll-cells of the microalgae fluid flow in the cross-section of the helical tube. The external light projecting onto the helical tubular photobioreactor from the center is a better way for microalgae cultivation. The light/dark cycle frequency of the microalgae fluid flow is calculated based on the light-intensity distribution inside the photobioreactor. The light/dark cycle frequency keeps constant for the same stream trace of the microalgae flow while varies with different flow regions. Meanwhile, the light/dark cycle frequency increases with the increase in microalgae fluid velocity. The suitable demarcation between the light and the dark zone depends on the shape and the location of the Dean roll-cells.     

Predicting future invasion risk of three widespread malignant weeds on Qinghai-Tibet Plateau,using multi-algorithm ensemble models北大核心CSCD

农田恶性杂草相比普通杂草的传播更为迅速且难以有效防治,对农业生产危害严重.明确典型恶性杂草当前潜在分布面积及未来气候变化下对耕地的潜在入侵风险对农业生产管理具有重要意义.以广泛分布于青藏高原农田中的3种常见恶性杂草,即野燕麦(Avena fatua L.)、一年生早熟禾(Poa annua L.)和狗尾草[Setaria viridis(L.)P.Beauv.]为研究对象,利用广义增强模型(GBM)、广义线性模型(GLM)、人工神经网络(ANN)、最大熵(MaxEnt)、随机森林(RF)及多元自适应回归样条(MARS)算法集合预测上述3种杂草在青藏高原的潜在地理分布以及驱动其变化的关键因子,以评估其对耕地的入侵风险.未来气候场景采用最新的第六次国际耦合模式比较计划(CMIP6)框架下2050年的4种共享经济路线(SSP1-2.6、2-4.5、3-7.0、5-8.5).结果显示:野燕麦适宜分布区面积约为3.5912×10^(5) km^(2),主要分布于四川西南部及青海东部,零星分布于甘肃、西藏和新疆;一年生早熟禾和狗尾草的适宜分布区面积约为4.3046×10^(5) km^(2)和2.0036×10^(5) km^(2),均主要分布于四川西南部和西藏东南部,零星分布于青海东部和甘肃南部.年均温是3种杂草分布的最主要驱动因子.此外,人类足迹和土壤有效氮是影响野燕麦分布的相对重要因子;土壤酸碱度、最暖季降水量是影响一年生早熟禾分布的重要因子;温度季节性、最暖季降水量是影响狗尾草分布的重要因子.预计至2050年,3种杂草在4种情境下均会出现不同程度的扩张,狗尾草的扩张面积表现出随辐射强迫的增强呈先升高后趋于稳定的趋势,而另两种杂草则呈先升后降的趋势.预计3种杂草的潜在分布面积在耕地中的占比与扩张面积的变化趋势一致,且在主产区的占比高于非主产区.模拟结果表明,未来气候变化下,随着3种恶性杂草的适宜分布区面积的扩张,其对青藏高原耕地的入侵风险将增加,尤其是粮食主产区所面临威胁更为严峻,建议应重点关注青藏高原粮食主产区恶性杂草的生理生态、迁移扩散和防治技术研究.(图6表2参61)     

Mechanistic insight into the biofilm formation and process performance of a passive aeration ditch (PAD) for decentralized wastewater treatment

• A Passive Aeration Ditch was developed to treat decentralized wastewater. • A model was developed to describe the process performance. • A high C/N ratio facilitates microbial growth but nitrification deteriorates. • A high salinity decreases both organic and nitrogen contaminants removal. Decentralized wastewater containing elevated salinity is an emerging threat to the local environment and sanitation in remote coastal communities. Regarding the cost and treatment efficiencies, we propose a passive aeration ditch (PAD) using non-woven polyester fabric as a feasible bubbleless aerator and biofilm carrier for wastewater treatment. Consideration has been first given to PAD’s efficacy in treating saline decentralized wastewater, and then to the impact of chemical oxygen demand-to-nitrogen (C/N) ratio and salinity on biofilm formation. A multispecies model incorporating the salinity effect has been developed to depict the system performance and predict the microbial community. Results showed that the PAD system had great capacity for pollutants removal. The biofilm thickness increased at a higher C/N ratio because of the boost of aerobic heterotrophs and denitrifying bacteria, which consequently improved the COD and total nitrogen removal. However, this led to the deterioration of ammonia removal. Moreover, while a higher salinity benefited the biofilm growth, the contaminant removal efficiencies decreased because the salinity inhibited the activity of aerobic heterotrophs and reduced the abundance of nitrifying bacteria inside the biofilm. Based on the model simulation, feed water with salinity below 2% and C/N ratio in a range of 1 to 3 forms a biofilm that can reach relatively high organic matter and ammonia removal. These findings not only show the feasibility of PAD in treatment of saline decentralized wastewater, but also offer a systematic strategy to predict and optimize the process performance.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

How can green building development promote carbon emission reduction efficiency of the construction industry?——Based on the dual perspective of industry and space

Environmental Science and Pollution Research - Green building development(GBD) plays an important role in improving carbon emission reduction efficiency of the construction industry(CEEOCI), and...     

Vitamin D mediates the association between acrylamide hemoglobin biomarkers and obesity

Environmental Science and Pollution Research - Mediation analysis aims to discover the role of intermediate variables from exposure to disease. The current study was performed to evaluate how...     

氨法脱硫技术在烧结烟气治理领域应用研究

LS氨法烟气脱硫技术是一种在传统基础上进行改进的湿法烟气脱硫技术。以66 m2烧结机烟气治理方案为例,分析LS氨法烟气脱硫技术各项技术指标,同时对该方法脱硫技术特点、经济运行进行全面分析。通过论述得出结论,LS氨法烟气脱硫技术是一种适合于冶金行业烧结机烟气治理的一项湿法技术。     

二氧化锰氧化降解双酚A的动力学

以室内实验方法,在25℃室温下,以二氧化锰为氧化剂,研究了pH4.12的水溶液中双酚A降解的反应动力学,并讨论了反应溶液的pH对反应动力学的影响.动力学研究采用了批处理实验方法和螺旋盖反应瓶.振荡器反应体系.结果表明,在无二氧化锰的条件下,双酚A的浓度在1周内检测没有明显的变化.在二氧化锰存在的条件下,双酚A对二氧化锰的氧化作用具有较强的反应感受性.pH一定的条件下,当二氧化锰相对过量时,在1小时之内,反应遵循准一级反应动力学,双酚A降解速率随其自身及二氧化锰浓度的增大而增大.随着反应的进行,双酚A的降解速率变慢.反应遵循的不是简单的准一级反应动力学而是复合的反应动力学.此外,随着溶液pH值由3.5升高至6.6,双酚A的降解速率显著下降.