Remediation of soil contaminated with pyrene using ground nanoscale zero-valent iron

The sites contaminated with recalcitrant polycyclic aromatic hydrocarbons (PAHs) are serious environmental problems ubiquitously. Some PAHs have proven to be carcinogenic and hazardous. Therefore, the innovative PAH in situ remediation technologies have to be developed instantaneously. Recently, the nanoscale zero-valent iron (ZVI) particles have been successfully applied for dechlorination of organic pollutants in water, yet little research has investigated for the soil remediation so far. The objective in this work was to take advantage of nanoscale ZVI particles to remove PAHs in soil. The experimental factors such as reaction time, particle diameter and iron dosage and surface area were considered and optimized. From the results, both microscale and nanoscale ZVI were capable to remove the target compound. The higher removal efficiencies of nanoscale ZVI particles were obtained because the specific surface areas were about several dozens larger than that of commercially microscale ZVI particles. The optimal parameters were observed as 0.2 g iron/2 mL water in 60 min and 150 rpm by nanoscale ZVI. Additionally, the results proved that nanoscale ZVI particles are a promising technology for soil remediation and are encouraged in the near future environmental applications. Additionally, the empirical equation developed for pyrene removal efficiency provided the good explanation of reaction behavior. Ultimately, the calculated values by this equation were in a good agreement with the experimental data.     

Anaerobic degradation of nonylphenol in soil

This study investigated the effects of various factors on the anaerobic degradation of nonylphenol (NP) in soil. The results show that the optimal pH for NP degradation was 7.0 and that the degradation rate was enhanced when the temperature was increased. The addition of compost enhanced NP degradation. The individual addition of the electron donors lactate, acetate, and pyruvate inhibited NP degradation. The high-to-low order of NP degradation rates under three anaerobic conditions was sulfate-reducing conditions > methanogenic conditions > nitrate-reducing conditions. The results show that sulfate-reducing bacteria, methanogen, and eubacteria are involved in the anaerobic degradation of NP, with sulfate-reducing bacteria being a major component of the soil. Of the anaerobic strains isolated from the soil samples, strain AT3 expressed the best ability to biodegrade NP.     

Aerobic degradation of bisphenol A by Achromobacter xylosoxidans strain B-16 isolated from compost leachate of municipal solid waste

A novel bacterium designated strain B-16 was isolated from the compost leachate of the municipal solid waste (MSW) in a laboratory reactor. This strain was identified as a gram-negative bacterium, Achromobacter xylosoxidans that could grow on bisphenol A (BPA, a representative endocrine disruptor) as a sole carbon source under aerobic condition. BPA-degrading characteristics of strain B-16 were investigated in liquid cultures. The results show that BPA degradation was influenced by several factors (e.g. inoculum size, substrate concentration, temperature and pH, etc). The half-lives, optimum temperature and pH were found to be 0.58-3.1d, 35 degrees C and 7.0, respectively. BPA-degrading activity and cell growth were inhibited at high substrate concentration. Metabolic intermediates detected during the degradation process were identified as p-hydroxybenzaldehyde, p-hydroxybenzoic acid and p-hydroquinone, respectively. Metabolic pathway of BPA degradation was proposed in this study.     

Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.     

Minimax regret optimization analysis for a regional solid waste management system

Solid waste management (SWM) facilities are crucial for environmental management and public health in urban regions. Due to the waste management hierarchy, one of the greatest challenges that organizations face today is to figure out how to diversify the treatment options, increase the reliability of infrastructure systems, and leverage the redistribution of waste streams among incineration, compost, recycling, and other facilities to their competitive advantage region wide. Systems analysis plays an important role for regionalization assessment of integrated SWM systems, leading to provide decision makers with break-through insights and risk-informed strategies. This paper aims to apply a minimax regret optimization analysis for improving SWM strategies in the Lower Rio Grande Valley (LRGV), an economically fast growing region in the US. Based on different environmental, economic, legal, and social conditions, event-based simulation in the first stage links estimated waste streams in major cities in LRGV with possible solid waste management alternatives. The optimization analysis in the second stage emphasizes the trade-offs and associated regret evaluation with respect to predetermined scenarios. Such optimization analyses with multiple criteria have featured notable successes, either by public or private efforts, in diverting recyclables, green waste, yard waste, and biosolids from the municipal solid waste streams to upcoming waste-to-energy, composting, and recycling facilities. Model outputs may link prescribed regret scenarios in decision making with various scales of regionalization policies. The insights drawn from the system-oriented, forward-looking, and preventative study can eventually help decision-makers and stakeholders gain a scientific understanding of the consequences of short-term and long-term decisions relating to sustainable SWM in the fast-growing US-Mexico borderland.     

大气气溶胶中元素种态研究

应用化学逐级提取流程对国际原子能机构（简称IAEA）气溶胶、室内和室外气溶胶、煤飞灰中元素的组成和种态进行了分析,应用仪器中子活化法测定了各种态中元素的含量,计算出元素在各种态中的分配比例。按照气溶胶中元素不同种态的环境和生物活性以及主要来源来分类,评述了元素在环境和生态系统中的吸收和转化能力,并对气溶胶中元素对环境的影响作出了初步的探讨。实验数据表明,气溶胶中的不同元素在各种态中的分布是有差异的。地壳来源元素中,Sc,Al,Fe和Ti主要分布在不溶物态中,稀土元素主要分布在氧化物态和不溶物态;不溶物态沉降到地表后不易进行迁移和转化,对环境的影响较小;氧化物态性质比较活泼,可以在大气中发生化学反应。Mn在气溶胶中主要分布在水可溶态和氧化物态,环境可交换性要比Al,Fe,Ti等大得多。人为来源元素的环境可交换态的比例都比较高,这说明它们通过干、湿清除过程沉降到地表后,水可溶态可以直接进入水循环;碳酸盐、氧化物和有机物态可以在适当的条件下与环境中的其他物质发生化学反应,生成易溶于水的化合物进入生态环境中,对环境影响较大。     

畜禽粪便除臭及生物干燥技术研究进展

综述了近几年来国内外畜禽粪便除臭及脱水技术的研究进展,其中对生物干燥技术的发展进行了比较详细的介绍,以期推动我国畜禽粪便处理技术水平的提高。     

重视城市污水集中处理投资,收费与运营市场化

本文深入研究了国外城市污水处理的成功经验。就城市污水处理市场化进程中,建立什么样的投资,收费与运营模式进行了讨论。     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

Immobilization of fungal laccase onto a nonionic surfactant-modified clay material: application to PAH degradation

Nonionic surfactant-modified clay is a useful absorbent material that effectively removes hydrophobic organic compounds from soil/groundwater. We developed a novel material by applying an immobilized fungal laccase onto nonionic surfactant-modified clay. Low-water-solubility polycyclic aromatic hydrocarbons (PAHs) (naphthalene/phenanthrene) were degraded in the presence of this bioactive material. PAH degradation by free laccase was higher than degradation by immobilized laccase when the surfactant concentration was allowed to form micelles. PAH degradation by immobilized laccase on TX-100-modified clay was higher than on Brij35-modified clay. Strong laccase degradation of PAH can be maintained by adding surfactant monomers or micelles. The physical adsorption of nonionic surfactants onto clay plays an important role in PAH degradation by laccase, which can be explained by the structure and molecular interactions of the surfactant with the clay and enzyme. A system where laccase is immobilized onto TX-100-monomer-modified clay is a good candidate bioactive material for in situ PAHs bioremediation.