一起焦炭塔自动顶盖机泄漏着火事故分析

针对一起焦炭塔自动顶盖机泄漏着火事故,开展了现场设备检查、中控室工艺操作状况核查、监控视频调阅、相关人员讯问,以及及液压螺栓锁环行程和相关部件受力状况核算综合分析结果表明:除焦人员关闭事故焦炭塔自动顶盖机时,液压螺栓锁环未锁到位的失误操作是事故发生的直接原因;而部分液压螺栓升降失是,调节不当,在关盖操作中,伸出长度不够,致使锁环不能完全进入卡糟内,导致液压螺栓头部棱边挤压到锁环孔角,阻碍了锁环锁到位,是事故发生的间接原因.     

水质氨氮在线监测仪发展现状

水中氨氮作为"十二五"国家重点控制污染指标,其在线监测设备的发展至关重要,本文主要介绍了目前中国市场上存在的主要水质氨氮在线监测仪的原理情况,并按照国家标准对其进行基本性能和实际水样测试的比较试验,为水质氨氮在线监测仪的应用提供参考。     

长沙市某污水处理厂CASS工艺脱氮除磷效果分析

本课题以长沙市某污水处理厂的实际生产工艺流程为试验现场,全面考察了CASS工艺的工作性能,对CASS工艺处理生活污水进行试验研究,为工艺推广应用提供直接的设计依据。并在已有研究的基础上,重点考察在相同进水条件下,不同工艺对氮磷的处理效果,结果表明,四个CASS池对COD、TN、NH3-N、SS的去除率分别为96.6%、68.1%、84.4%、96.8%,均能达标排放,对TP的去除率为76.3%,超标率为69.3%,针对出水TP不达标的情况,主要讨论了影响除磷的因素并提出了改善措施。     

三氯氢硅建设项目污染源分析与控制

三氯氢硅是制备多晶硅的重要原料,三氯氢硅极易挥发,在空气中易燃,并能与空气形成爆炸混合物,其化学性质很不稳定,遇水或水蒸气发生剧烈的放热反应,形成有毒的腐蚀性氯化氢烟雾;通过对三氯氢硅建设项目工艺流程及产污环节分析,探讨了该类项目生产过程废气、废水、噪声、固体废物等污染物的种类、成分及产生量,在此基础上提出了相应的污染控制措施,对该类项目环境影响评价工作有一定的指导作用。     

余杭区环评市场质与价的博弈关系分析

随着《环评法》的颁布实施,环评市场不断扩大,本文针对杭州市余杭区环评价格高低有错、环评质量良莠不齐的现象,分析了环评机构间的环评价格博弈关系、环评机构与环保管理部门间的环评质量博弈关系,并指出环保管理部门适当融入到环评市场中有利于突破＂囚徒困境＂及＂小偷与守卫＂博弈,引导环评市场健康、有序发展。     

城市突发公共事件风险评估

突发公共事件表现出了强烈的损失发生不确定性,企业或政府单位应主动地认识突发公共事件风险,积极管理突发公共事件风险,有效地控制突发公共事件风险,把突发公共事件风险减至最低的程度,实行突发公共事件全过程风险管理.本文主要介绍了突发公共事件风险管理的主要程序和重要内容.     

互动教学法在安全培训中的探索与实践

安全培训工作是企业安全工作的重要基础和技术支撑,寻求一种适合成人学习特点和满足安全生产对培训需求的教学方法,是新形势下搞好安全培训工作的关键所在,经多年的探索与实践,采用互动式教学法,在职工安全培训中取得了一定的实效     

A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Synthesis and scale inhibitor performance of polyaspartic acid

Polyaspartic acid (PASP) has been extensively studied in recent years as a green scale inhibitor. PASP was synthesized by thermal polycondensation of maleic anhydride and ammonium carbonate in this study. The optimal polycondensation reaction conditions were the raw material (maleic anhydride and ammonium carbonate) molar ratio of 1.0:1.2, the polymerization temperature of 180°C and reaction time of 2.0 hr. The results showed that PASP exhibits very good scale inhibiting performance. The inhibition rate was 95% for calcium carbonate and 90% for calcium sulfate by the application of 5 mg/L PASP.